Megger MIT415 Insulation and Continuity Tester

The Megger MIT415 Insulation and Continuity Tester has been specially designed for industrial, commercial and domestic electricians and is perfect for insulation, continuity and ESD testing.

Like the Megger MIT310 and Megger MIT320, the MIT415 offers the combination of an analogue arc display and a dual digital display for a comprehensive and clear way of viewing measurement results.

The Analogue Arc display features a single needle response which mimics a moving coil meter and shows essential charge and discharge characteristics that are not visible on digital numeric only displays.

The Dual digital display enables additional data such as Insulation test voltage, Insulation leakage current, Supply frequency (when measuring volts) and test mode to be displayed in unison with the main measurement results.

Designed to be exceptionally safe the Megger MIT 415 meets IEC1010-2, EN61557 and the safety requirements for use on the CAT IV 600 V. The fast detecting circuitry of this Megger tester prevents damage to the instruments if accidentally connected to live circuits or across phases.

The tough outer casing of the Megger MIT415 makes it waterproof, easy to grip and almost indestructible. Accessories included alongside  this Megger tester include an information CD, a calibration certificate,a rubber boot with stand and a SP5 remote switch probe.

Megger MIT415 Insulation Testing

• Test voltages - 10 V, 25 V, 50 V, 100 V, 250 V and 500 V
• Test Lock - Locks insulation test on continuous.
• Test voltage display - The actual test voltage is displayed on the smaller digital readout, with the insulation result on the larger digital display.
• Analogue arc - The display also features an analogue arc to replicate the response of a moving coil display.
• PI and DAR - Polarisation Index (PI) and Dielectric
• Absorption Ratio (DAR) functions
• 50 G½ - Insulation testing from 1 G½ to 50 G½
• Silicone leads - High quality flexible silicone test leads are comfortable to use and prevent measurement errors on higher G½ ranges.
• Test inhibit - prevents testing if system voltages in excess of 50 V are detected when making insulation tests.
• Insulation buzzer - The buzzer can operate if the insulation resistance is above a preset limit, set via the Setup menu.

Megger MIT415 Continuity Testing

• Auto-test - Auto test on circuit contact enables real two handed operation without the need to press the test button.
• 200 mA or 20 mA - Either 200 mA or 20 mA continuity test currents are available. 20 mA test current will considerably increase battery life.
• Lead null - Lead resistance compensation (NULL) operates up to 10 ½ of resistance.
• Buzzer - ON-OFF selected by simple push button.
• Buzzer limit - Continuity buzzer limit alarm provides adjustment of the maximum resistance at which the continuity buzzer sounds. This is adjustable from 1 ½ to 20 ½ in 5 steps.
• Resistance - k½ range extends continuity measurement to 1 M½.

Megger MIT415 Insulation Tester Key Features:

• 10 V and 100 V ESD testing
• 25 V & 50 V signal cable insulation testing
• 250 V & 500 V Insulation testing up to
• 50 G½ (500 V)
• Continuity testing at 200 mA or 20 mA from 0.01 ½ to 999 k½
• DC and TRMS AC voltage measurement
• Large backlit display
• Combined analogue and dual digital readout
• Weatherproof to IP54
• Supplied with AA alkaline cells

Megger MIT415 Insulation Tester Includes:

• Megger MIT415 Insulation & Continuity Tester
• Hard case
• Test leads with probes and croc clips
• Rubber boot with stand
• Calibration certificate
• SP5 remote switch probe
• Information CD
• Batteries