Fluke 1653B Multifunction Tester

description

technical info

offers

Fluke 1653B Installation Tester: The ideal test instrument for professional trouble-shooters

Used and recommended by many professionals, the Fluke 1653B Multifunction Tester has high-end features and still stays easy to use.

Mains systems with frequency converters (i.e. building sites), appliances including switch mode power supplies, solar systems must be protected with RCD type B (draft IEC 60364-5-53 / DIN VDE 0100-530, IEC 60364-7-712 / DIN VDE 0100-712).
In the event of an insulation fault the leakage current could be a pure DC current, which is only detected by RCD type B.

Take two measurements at once with a dual display. PEFC/PSC and loop impedance are measured and displayed in parallel.
Brand new high current loop mode. Faster measurements in comparison to loop tests with non-trip mode for RCD’s.
Fast voltage measurement between L-N, L-PE and N-PE using the mains cord. No need to change measurement connections.
The latest Fluke 1650 test instruments come with a Zero Adaptor for fast, reliable and accurate test lead and mains cord compensation. This Adaptor can be used for mains plugs, probes, alligator clips and more.
The Fluke 1653B Multifunction Tester comes with a slim probe with test button so you can keep your eyes on the display while probing difficult to reach points.

Compact and lightweight, the Fluke 1653B Installation Tester weighs only 1.3KG and can withstand a drop from 1m.
Earth Volt Touchpad detects raised earth voltages >50V, indicating potential dangerous situations.
As standard this Fluke multifunction tester is supplied with fused test leads that comply with GS38.
Forget complex multi-level menus, the Fluke 1653B has a simple rotary dial to select the function you need.
Large backlit display, clear symbols and a wide viewing angle.

Memory (up to 500 test results)
Fast high current loop test
Variable RCD current mode for customized settings
PASS/FAIL indication for RCD tests
Select voltage measurement between L-N, L-PE and N-PE
Zero adapter for easy test lead compensation, available as new accessory and also included with standard scope of supply

	1652C	1653B	1654B
Zero adapter	x	x	x
Volts (V)	x	x	x
Frequency (Hz)	x	x	x
Insulation (RISO)	x	x	x
Continuity (RLO)	x	x	x
Fast high current loop test (ZI)	x	x	x
Loop & line resistance-mΩ resolution			x
Short Circuit Current (PSC,PEFC, IK)	x	x	x
RCD FI Trip TimeTest (FI, DDR)	x	x	x
Variable RCD current setting	x	x	x
Tests time-delayed RCD´s (S-type)	x	x	x
RCD Ramp Test (FI, DDR)	x	x	x
RCD Auto Test (FI, DDR)	x	x	x
Test of smooth dc sensitive RCD type B			x
Earth Resistance (RE)		x	x
Phase Sequence	x	x	x
Internal Memory		x	x
IR Interface for downloading data		x	x
Remote probe	x	x	x