Beha-Amprobe ACD-10 PLUS AC Clamp Meter - 600A
Built with thin jaws, Beha-Amprobe's ACD-10 is excellent for clamping around smaller wires, or for getting a secure connection around wires in cramped environments (such as inside eletrical cabinets etc).
The jaws are just 10mm (0.4") thick and can be attached to conductors with maximum diameter of 25mm. This is a AC only clamp meter - once clamped, it can be used to measure AC current up to 600A.
Beha-Amprobe's ACD-10 is also a fully functional digital multimeter; connect up your test leads and you'll also be able to measure AC/DC voltage to 600V, resistance to 40MΩ, capacitance to 3000μF and also perform continuity, frequency and inrush current measurements.
Additional functions of this clamp meter include a HOLD function (stores current value shown on the screen temporarily), MAX function (calculates the maximum value taken over a period of time) and auto-ranging (automatically determines appropriate measurement range when testing).
If you're looking for a reliable way of measuring AC current and other parameters, the ACD-10 is a good choice.
Beha-Amrpobe AC-10 PLUS Clamp Multimeter (600A) Key Features
- Extra thin jaws with maximum diameter of 25mm, ideal for measuring in cramped locations
- AC and DC voltage measurements to 600V
- AC current measurements up to 600A
- Resistance measurements to 40MΩ
- Continuity buzzer
- Capacitance measurements to 3000μF
- Frequency measurements
- In rush current
- Data hold
- MAX hold
- Autoranging clamp meter
- Auto power down when left idle
- Rubber over-molded casing
- Overload protection
What's Included?
- Beha-Amprobe AC-10 PLUS Clamp Multimeter
- Test leads
- Battery (Installed)
- Soft Carrying Pouch
- User Manual
Beha-Amprobe ACD-10 Technical Specifications
| AC Voltage | 4.000 V, 40.00 V, 400.0 V, 600 V |
| DC Voltage | 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 V |
| AC Current | 40.00 A, 400.0 A, 600 A |
| Resistance | 400.0 µΩ, 4.000 Ω, 40.00 Ω, 400.0 Ω, 4.000 MΩ, 40.00 MΩ |
| Capacitance | 500.0 nF, 5.000 F, 50.00 CF, 500.0 µF, 3000 µF |
| Frequency | 40 Hz → 400 Hz with Jaw, 10 Hz → 100 kHz with test leads |
| Accomodates Conductors | up to 1.0''(25 mm) in diameter |
| Display | 3-3/4 digits 4000 counts LCD display |
| Update Rate | 3 per second nominal |
| Polarity | Automatic |
| Operating Temperature | °C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C |
| Altitude | Operating below 2000m; Indoor use |
| Storage Temperature | -20 °C to 60 °C, < 80% RH (with battery removed) |
| Temperature Coefficient | nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C) |
| Low Battery | Below approx. 2.4V |
| Power Supply | 3V coin battery IEC-CR2032 |
| Power Consumption | 2.8 mA typical except that 3.3 mA typical for ACA function |
| APO Timing | Idle for 30 minutes |
| APO Consumption | 5 µA typical |
| Jaw Opening and Conductor Diameter | max 26 mm |
| Special Features | 30ms Max Hold; Data Hold; Relative Zero mode |
| SKU | 3037808 |
|---|---|
| Manufacturer Part Code | 3037808 |
| Model Ref | Amprobe ACD-10 PLUS |
| Country of Origin | Taiwan |
