TPI 196 Process Digital Multimeter w/ 0 to 24mA Output
Suitable for basic electrical measurements, this digital multimeter also has 0-24mA output for process controls.
Featuring a triple display, the TPI 196 can show more than one reading simultaneously, saving time and effort when measuring. The meter is autoranging, and will automatically choose the right range when testing.
This multimeter can test DC and AC voltage to 1000V, DC/AC current to 1A, resistance to 50MΩ, frequency to 500KHz and can also perform continuity/diode testing.
TPI 196 Digital Multimeter Key Features
- Large size 50000 count display
- 0-24mA output for process controls
- Triple display shows more information than a standard DMM
- 51 segment analogue bar graph shows fast AC fluctuations
- Backlight for use in poor lighting conditions
- Autoranging
- Separate battery/fuse compartment
- Increased safety with silicone rubber 1000V CAT III, CAT IV 600V test leads
- Auto power off when left idle
- Diode and continuity testing
- Test AC/DC voltage to 1000V
- AC/DC current testing to 1A
- Resistance measurements to 50MΩ
- Frequency measurements to 500KHz
What's Included?
- TPI 196 Multimeter
- Silicone Rubber CAT IV 600V Test Leads
- Protective Rubber Boot
TPI 196 Technical Specifications
| DC Volts | Maximum Input: 1000V
Maximum Resolution: 0.0001mV Accuracy: +/-0.05% |
| AC Volts | Maximum Input: 1000V
Maximum Resolution: .001mV Accuracy: +/-0.4% |
| DC Amps | Maximum Input: 1A
Maximum Resolution: 0.0001mA Accuracy: +/-0.5% |
| AC Amps | Maximum Input: 1A
Maximum Resolution: 0.0001mA Accuracy: +/-0.75% |
| Resistance (Ohms) | Maximum Input: 50MΩ
Maximum Resolution: 0.01Ω Accuracy: +/-0.05% |
| Frequency | Maximum Input: 500KHz
Maximum Resolution: 0.01Hz Accuracy: +/-0.05% |
| Capacitance | N/A |
| Inductance | N/A |
| Temperature
(K-Type Thermocouple) |
N/A |
| Continuity | Audible at less than 30Ω |
| Diode | 3V at 1mA maximum output |
| Duty Cycle | N/A |
| True RMS Responding | No |
| Conductance | No |
| Pulse Width | No |
| Data Hold | Yes |
| Min/Max Record | Yes |
| Time Stamp Logging | No |
| Relative Mode | Yes |
| Compare Mode | Yes |
| RS-232 Output | Yes, Optically Isolated |
| Process Loop Output | Yes (0 to 24mA) |
| Sleep Mode / Auto Off | Yes |
| Protective Boot | Yes (standard) |
| Display Type | 50,000 count backlit LCD with dual sub displays and analog bargraph |
| Range Selection | Auto / Manual |
| Operating Temperature | 32°F to 113°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Humidity | 80% non-condensing |
| Size | 8.3” x 3.7” x 1.9” (210mm x 95mm x 47mm) without boot
8.7” x 4.3” x 2.6 (220mm x 110mm x 65mm) with boot |
| Weight | 1.3lbs (570g) without boot
1.9lbs (850g) with boot |
| Battery Type | 9V Alkaline (NEDA 1604) |
| Battery Life | 50hrs Typical |
| OverInput Category | CAT III 600V |
| Agency Approval | cULus 61010-1, IEC 61010-1 |
| Warranty | Limited Lifetime |
| SKU | TPI-196 |
|---|---|
| Manufacturer Part Code | 196 |
| Country of Origin | South Korea |
