DiLog CombiVolt 1 Voltage Tester and Continuity Tester with Phase Rotation Test
The CombiVolt 1 three-in-one tester has a rugged, ergonomically formed housing for perfect handling. If you require a voltage and continuity tester with digital LCD display, then see the DiLog CombiVolt 2 Voltage / Continuity Tester DL6790.
DiLog DL6780 CombiVolt 1 Voltage and Continuity Tester features:
-
Testing of AC/DC voltages from 12 to 690V AC/DC
-
Continuity testing with optical and acoustic indication
-
Automatic switching between voltage and continuity
-
Three Phase Rotation detection system
-
Intergrated single pole test for phase detection
-
Short response time (<0,1s) for fast voltage tests
-
Single pole phase indication
-
Fully compliant with GS38
-
Fully operational voltage indication even when batteries are discharged
-
IP65 - water-jet and dust-tight protection for outdoor use
-
Electrical torch function - for working in dark environments
-
Probe-tip protection - for reducing the danger of injuries which may be cause by probe tip
-
Designed and built according to IEC61010, IEC61243-3
-
Proving unit friendly
Technical Data Section
DiLog DL6780 CombiVolt 1 Voltage and Continuity Tester specification:
Voltage
-
Voltage Display: 12 – 690 V AC/DC
-
LED Resolution: 12, 24, 50, 120, 230, 400, 690
-
Voltage Detection: Automatic
-
Acoustic Signal: AC voltage – DC voltage
-
Polarity Detection: Full range
-
Response Time: LED < 0.1s
-
Frequency Range: 0 – 400 Hz
-
Peak Current: Is<0.3A/Is(after 5s) <3.5 mA
-
Operation Time: 30s
-
Recovery Time: 10 min
-
Auto Power On: <12 V AC/DC
Single Pole Voltage Indication
-
Voltage Range: 100 – 690 V
-
Frequency Range: 50 – 400 Hz
Continuity
-
Measuring Range: 0 - 400 KΩ
Phase Rotation Test
-
Voltage Range: 100 – 690 V
-
Frequency: 45 – 65 Hz
-
Over Voltage Protection: 690 V AC/DC
Other
-
Power Supply: 2 x 1.5V LR03 battery
-
Dimensions: 255 x 70 x 28 mm
-
Weight: 200g
Download technical PDFs for further information on this product.