Megger TPT220 Voltage Tester

The Megger TPT220 Voltage Tester comes with an LCD display and provides AC and DC voltage measurements from 6 to 1000 volts.

This voltage indicator also has a continuity/resistance function ranging from 0 to 2kΩ. Any continuity and voltage measurements greater than 35V are accompanied by an acoustic sounder.

The TPT220 display has a backlight with an ambient light sensor that illuminates the display in poorly lit environments. With a low battery indicator, continuity hold and torch lamps included, this Megger volt tester is ideal.

It will also test between phase and earth on circuit protected by RCD/RCBO and the safety breaker will not trip these devices. The simplified phase sequence indication feature avoids the crossing of test probes by many two pole testers.

A CAT IV 1000V safety rating with an IP65 rated strong body that provides comfortable grip and the GS38 shrouds, make this Megger tester ideal for all aspects of voltage indication testing.

The Megger TPT220 Voltage Indicator will warn the operator of dangerous test voltages should the batteries become exhausted.

Use this voltage tester for the checking of electrical installations, auto electrical, fire alarm systems and telecom.

Megger TPT220 Voltage Tester key features

• Exhausted battery warning indicator
• Spare GS38 tips included
• Auto power off
• AC and DC voltage from 6 to 1000 V
• Resistance / Continuity (acoustically)
• RCD function test
• Two pole phase sequence indication
• LCD display
• CAT IV 1000 V rating

Technical Data Section

General

Display: Optical 3 1/2 digit, LCD
Operating panel: RCD button, ON/OFF button, D–Hold button
Voltage range: 6 to 1000 V
Accuracy: 1.5% ±3 digits
Frequency (ACV): 40 to 400 Hz
Resistance/Continuity test: 0 - 2000 Ω
Accuracy: 5% ±5 digits
Phase indication: >100 V AC
Switchable load: Is <0.3 A ED (DT) = 30 sec.
Operating frequency: 0 – 400 Hz
Torch: Ultra bright LED
Power supply: 2 x 1.5 V batteries type AAA LR03
Dimensions: 70 mm (W) x 238 mm (H) x 30 mm (D)
Weight: 200 g

Environmental

Operating temperature: -10 °C - +55 °C
Humidity: 96% Rh
Ingress protection: IP65
Safety: CAT IV 1000 V
Compliance: TÜV, GS IEC/EN 61243-3 (DIN VDE 0628-401)

Download technical PDFs for further information on this product.

Megger TPT220 Datasheet