Use the RapidTrace 1200 to quickly find user opens, shorts, splices, bridge taps, split/re-splits, wet splices, frayed cables, water ingression, taps and splitters on network cabling within seconds.
Suitable for use on a wide variety of cables, including telecom, cat (3-6), power cabling, coaxial and mains power cabling, the RapidTrace can measure across cables from a length of 0.5m to 6km with selectable impedance of 25, 50, 75 and 100Ω.
Up to 50 individual traces can be stored on the device's built in memory for comparison over a time period. Historical data (stored on PC) can also be uploaded to the tester to compare against current results.
This tester also includes a built-in tone generator, has a USB interface and is ideal for use by telecommunication companies, data/network cabling installers, CCTV/satellite TV installers and electricians working on metallic cable installations.
VONAQ RapidTrace 1200 Graphical Handheld TDR Cable Fault Locator Key Features
- Accurate determination of faults within cables from 0.5m to 6km
- 25, 50, 75 and 100Ω impedance selection
- Memory capacity stores up to 50 saved traces
- Historical data upload for comparison against saved values
- Uses pre-determined gain and pulse width
- 5 control buttons
- Built-in tone generator for pair tracing and identification
- USB 2.0 interface
VONAQ RapidTrace 1200 Technical Specifications
Ranges | 7m, 15m, 30m, 60m, 120m, 250m, 500m, 1km, 2km, 3km, 6km |
Range Selection | Manual range control |
Accuracy | 1% of selected range |
Resolution | Approx 1% of range |
Sensitivity | Min 3 pixel return at 4km on 0.6mm ø, PE, TP |
Velocity Factor | Adjustable from 1 to 99% or feet, meters/ micro second |
Output Pulse | 5 volts peak to peak into open circuit |
Output Impedance | Selectable 25, 50, 75 and 100Ω |
Output Pulse Width | 3ns to 3ms, automatic with range |
Scan Rate | 2 scans / second or scan held |
Memory Capacity | 50 Traces |
Tone Generator | 810 to 1000Hz |
Battery Life | 60 hours continuous scanning |
Power Supply | 6 volts 4 x 1.5AA alkaline cells |
Power Down | Selectable 1, 2, 3 minutes or disabled |
Backlit Display | 128 x 64 pixels |
Voltage Protection | 250V AC |
Operating Temperature | -10 to 50°C |
Storage Temperature | -20 to 70°C |
Dimensions | 165 x 90 x 37mm (6.5 x 3.5 x 1.5") |
Weight | 350g (12oz) |
Safety | IEC 61010-1 EN 60950 |
EMC | BS/EN 61326-1 |
Water/Dust Proof | IP54 |
SKU | RAPIDTRACE 1200 |
---|---|
Manufacturer Part Code | RAPIDTRACE 1200 |