Aim-TTi TG315 3MHz Function Generator
The Aim-TTi TG315 3MHz Function Generator is a versatile, precise and economic waveform generator. It can create waveshapes over frequencies ranging from 0.03Hz to 3MHz. It maintains a constant amplitude as the frequency is varied, and offers a wide range of controlled amplitudes from a low-impedance source.
In addition to this, the Aim-TTi TG315 3MHz Function Generator’s voltage control facilitates frequency response testing, with or without modulation, as it enables a source of swept frequency to be generated.
Wide Sweep Range
Each of the Aim-TTi TG315 3MHz Function Generator’s ranges can be swept by at least 1000:1. They can be swept manually or via the external sweep input.
Wide Range Level Control
The Aim-TTi TG315 3MHz Function Generator’s main output provides a maximum emf of 20V peak-to-peak from a 50Ω or 600Ω source. Additionally, it includes an amplitude Vernier with a 20dB range which, when combined with two switched attenuators (-20dB and -40dB), provides a minimum emf of 2mV peak-to-peak.
Via the centre detent control, the user can access a variable DC offset of ±10V. The Aim-TTi TG315 3MHz Function Generator also includes an auxiliary output that provides a fixed 0V to +5V level which can be used to drive TTL and CMOS loads.
Exceptional Waveform Quality
The Aim-TTi TG315 3MHz Function Generator maintains good waveform quality throughout the frequency range and at low output levels. It can provide low sine wave distortion, low aberration triangle waves, and fast-edged square waves with low overshoot.
Variable Symmetry for Pulse and Ramp Waveforms
The Aim-TTi TG315 3MHz Function Generator’s frequency is independent of its symmetry setting. It is able to provide bi-directional variable symmetry between 1:9 and 9:1.
Dual Digital Display
Via the Aim-TTi TG315 3MHz Function Generator’s dual-section digital display the user can view frequency and amplitude readings simultaneously.
RMS or Peak-to-Peak Amplitude Display
The Aim-TTi TG315 3MHz Function Generator’s output level display can be set to show any of the following three parameters:
- Peak-to-peak amplitude
- RMS amplitude
- DC offset
Accurate RMS Values for Each Waveform Shape
The Aim-TTi TG315 3MHz Function Generator will automatically change the decimal points and units to ensure the true amplitude is displayed regardless of the attenuator setting.
Additionally, a display indicator warns the user of illegal combinations of offset and amplitude settings that would create clipping in the output stage.
Fast and Accurate Frequency Measurements
When measuring frequency at Hz or above, the Aim-TTi TG315 3MHz Function Generator’s auto-ranging reciprocal measurement provides a 4-digit resolution and rapid update. It has an accuracy of ±1Hz.
When measuring sub-Hz frequencies, the Aim-TTi TG315 3MHz Function Generator’s measurement mode is changed to provide readings with a 3-digit resolution. This maintains a fast update, although the accuracy is reduced.
Nevertheless, the Aim-TTi TG315 3MHz Function Generator offers better accuracy and faster display across its entire frequency range compared to fixed gate-time meters.
Suitable for Bench- and Rack-Mounted Applications
The Aim-TTi TG315 3MHz Function Generator is housed in a 2U high, heavy-duty ABS case with an integrated tilt stand. It can be mounted using an optional RM50 rack mount kit.
The Aim-TTi TG315 3MHz Function Generator is a state-of-the-art analogue generator with basic Sine, Square and Triangle generator functions, variable DC offset, variable symmetry and an external sweep input.
Aim-TTi TG315 3MHz Function Generator Key Features
- A versatile, precise and economic waveform generator
- Sine, Square, and Triangle generator functions
- Variable DC offset
- Variable symmetry
- External sweep input
- Create waveshapes over frequencies between 0.03Hz and 3MHz
- Maintain a constant amplitude as the frequency is varied
- Provides a wide range of controlled amplitudes from a low-impedance source
- Voltage control facilitates frequency response testing
- Modulation can be added
- Generate a source of swept frequencies
- Ranges can be swept by at least 1000:1
- Ranges can be swept manually or via the external sweep input
- The main output provides a maximum emf of 20V peak-to-peak from a 50Ω or 600Ω source
- The amplitude Vernier with a 20dB range and two switched attenuators (-20dB and -40dB) provide a minimum emf of 2mV peak-to-peak
- Variable DC offset of ±10V
- The auxiliary output provides a fixed 0V to +5V level that can be used to drive TTL and CMOS loads
- Maintains good waveform quality throughout the frequency range and at low-level outputs
- Low sine wave distortion, low aberration triangle waves and fast-edged square waves with low overshoot
- The frequency setting is independent of the symmetry setting
- Provides bi-directional variable symmetry between 1:9 and 9:1
- Output level display can be set to show peak-to-peak amplitude, RMS amplitude or DC offset
- Automatically changes the decimal point and units
- Ensures the true amplitude is displayed regardless of the attenuator setting
- The display indicator warns of illegal combinations of the offset and amplitude settings
- Auto-ranging reciprocal measurement provides a 4-digit resolution, fast update and accuracy of ±1Hz
- Measurement mode changes to provide a 3-digit resolution when determining sub-Hz frequencies
- Offers a better accuracy and faster display across the entire frequency range compared to fixed gate-time meters
- 2U high, heavy-duty ABS case with an integrated tilt stand
- Can be mounted using an optional RM50 rack mount kit
- State-of-the-art analogue generator
What’s Included?
- Aim-TTi TG315 3MHz Function Generator
Aim-TTi TG315 3MHz Function Generator Technical Specifications
| Frequency | ||
| Frequency Range | 0.03Hz to 3MHz in 7 overlapping decade ranges with fine adjustment by a vernier. |
|
| Vernier Range | 1000:1 on each range. | |
| Operating Modes | ||
| Notes | Specifications apply for the top decade of each frequency range and maximum output into 50Ω termination. | |
| Sine | Distortion | <0.5% on 300, 3k and 30k ranges; <1% on 3, 30 and 300k ranges; all harmonics >25dB below fundamental on 3M range. |
| Amplitude Flatness | ±0.2dB to 200kHz; ±2dB to 3MHz. | |
| Triangle | Linearity | Better than 99% to 200kHz |
| Square Wave | Rise/Fall Times | <100ns |
| Mark - Space Ratio | 1:1 ± 1% to 100kHz | |
| DC | Range | ±10V unterminated |
| Symmetry | Symmetry Range | Variable typically 1:9 to 9:1 (on top decade of each range), frequency divided by 10. |
| Meter Functions (Generator Mode) | ||
| Frequency | Auto-ranging reciprocal measurement giving 4 digit resolution for frequencies down to 1Hz; maximum resolution is 0.001Hz. Accuracy ±1 digit for 0.2Hz to 3MHz. Below 0.2Hz accuracy is ±1% of range full scale (symmetry off). |
|
| Amplitude | Display shows peak-to-peak amplitude or rms value. Display corrected for attenuator setting. 3-digit resolution, accuracy typically 5% of range. Clipping indicator on display. |
|
| DC Offset | 3-digit resolution; accuracy typically ±2% of setting ±1 digit. Display corrected for attenuator setting. Clipping indicator on display. | |
| Outputs | ||
| Main - 50Ω | Amplitide | 2mV to 20V peak-peak open circuit (1mV to 10V peak-peak into 50) in four switch-selectable ranges with 20dB vernier control within each range |
| Attenuator Ranges | 0dB, -20dB, -40dB, -60dB | |
| DC Offset Range | ±10V from 50. DC offset plus signal peak limited to ±10V (±5V into 50). DC offset plus waveform attenuated proportionally by the attenuator. | |
| Main - 600Ω | Alternative output socket offering the same facilities as the 50 socket. | |
| Aux Out | 0 to 5V TTL/CMOS logic levels capable of driving 2 standard TTL loads. Frequency, symmetry and phase as main outputs | |
| Sweep Modes | ||
| External | Input Impedance | 10kΩ |
| Input Sensitivity | 0 to 3V for 1000:1 sweep | |
| Max. Input Voltage | ±10V | |
| Sweep Linearity | Better than 1% | |
| Max. Slew Rate | 0.1V/us | |
| General | ||
| Casing | Moulded ABS case with tilt stand | |
| Power Requirements | Input Voltage | 220 to 240 volts AC nominal 50/60Hz or 110 to 120 volts AC nominal 50/60Hz by rear panel adjustment. Installation category II. |
| Power Consumption | 25VA max. | |
| Temperature & Environmental | Operating Temp. Range | +5°C to +40°C, 20% to 80% RH. |
| Storage Temp. Range | -10°C to +65°C | |
| Environmental | Indoor use at altitudes up to 2000m. Pollution degree 2. |
|
| Size | 260(W) x 88(H) x 235(D)mm (10.2 x 3.4 x 9.2"), excluding handle and feet. | |
| Weight | 1.9kg (4.2lb) | |
| Safety | Complies with EN61010-1. | |
| EMC | Complies with EN61326. | |
| SKU | 59120-3300 |
|---|---|
| Manufacturer Part Code | 59120-3300 |
