Beha-Amprobe AT-8000-TE Transmitter

Description

The Beha-Amprobe AT-8000-TE Transmitter can be used with the Beha-Amprobe AT-8000-RE Receiver to trace energised and de-energised wires in walls, floors and ceilings, as well as identify and locate breakers, fuses, shorts and opens. Together these tools are ideal for use on industrial sites with poorly documented wire locations. To this end, the Beha-Amprobe AT-8000-TE Transmitter has a safety rating of CAT IV 600V, the best of any transmitter on the market; it will protect the user against transient overvoltage spikes up to 8000V. For an overview of the Beha-Amprobe AT-8000-EUR Series, please see the following video.

The Beha-Amprobe AT-8000-TE Transmitter has three power modes:

High: for normal circuits
Low: for precision tracing in difficult areas
Loop: boosts the signal when using the signal clamp (NOT included)

It also includes two frequency modes (6kHz and 33kHz) that enable optimal tracing of energised and de-energised circuits. The Beha-Amprobe AT-8000-TE Transmitter will automatically select the appropriate frequency mode/ output depending on the detected voltage and will prompt the user to set the most applicable power mode for the application.

The Beha-Amprobe AT-8000-TE Transmitter is a simple-to-use, safety-optimised signal transmitter.

Applications

Applications	RCD-protected circuit wire tracing
	Find breaks, openings, and shorts
	Trace wires in non-metallic pipes and conduits
	Trace wires in metal conduit
	Trace shielded wires
	Trace underground wires
	Trace low voltage wires and data cables
	Sort bundled wires
	Map a circuit using test leads connection
	Trace breakers/fuses on systems with light dimmers

Trace Wires

Locate Energised or De-Energised Breakers

Beha-Amprobe AT-8000-TE Transmitter Key Features

A signal transmitter designed for use with Beha-Amprobe’s AT-8000-RE Receiver
Trace energised and de-energised wires in walls, floors and ceilings
Identify breakers and fuses
Pinpoint shorts and opens
Ideal for use on industrial sites with poorly documented wire locations
CAT IV 600V safety rating
The best safety rating of any wire tracer on the market
Protects users from transient overvoltage spikes up to 8000V
High Power mode: for normal circuits
Low Power mode: for precision tracing in difficult areas
Loop Power mode: boosts the signal when using the signal clamp (NOT included)
Two frequency modes: 6kHz and 33kHz
Automatically selects the most appropriate frequency mode/ output
Prompts the user to select the most applicable power mode
A simple-to-use, safety-optimised signal transmitter

What’s Included?

Beha-Amprobe AT-8000-TE Transmitter

Tech Specs

Part Code

Beha-Amprobe AT-8000-TE Transmitter Technical Specifications

Specifications	AT-8000-TE Transmitter
Measurement Category	CAT IV 600 V
Display size	(LED signals)
Display Dimensions (W x H)	-
Display Resolution	-
Display type	-
Colour Display	-
Booting time	< 2 sec
Backlight	-
LED Indicator	Operating mode LEDs: red Battery status LEDs: green, yellow, red
Operating Temperature range	-20 °C to 50 °C (-4 °F to 122 °F)
Operating Humidity	45%: -20 °C to <10 °C (-4 °F to <50 °F)
	95%: 10 °C to <30 °C (50 °F to <86 °F)
	75%: 30 °C to <40 °C (86 °F to <104 °F)
	45%: 40 °C to 50 °C (104 °F to 122 °F)
Storage temperature and humidity	-20 °C to 70 °C (-4 °F to 158 °F), ≤ 95% RH
Operating altitude	0 to 2000 m (0 to 6561 ft)
Transient protection	8.00 kV (1.2/50μS surge)
Pollution degree	2
IP Rating	IP 40
Drop test	1 m (3.28 ft)
Power Supply	8 x AA (alkaline or NiMH rechargeable)
Power consumption	Hi/Lo mode: 70 mA Loop mode with Clamp: 90 mA Consumption without signal transmission: 10 mA
Battery life	Hi/Lo mode: approx. 25 h Loop mode: approx. 18 h
Low battery indication	Yes
Fuse	1.6 A, 700 V, fast-acting, Ø 6x32mm
Maximum conductor size	-
Response time	Line voltage monitoring: 1 sec
	Line voltage monitoring: 1 sec	Battery voltage monitoring: 5 sec
	Voltage Warning Indicator	Battery voltage monitoring: 5 sec	> 30 V AC/DC
	Non-Contact Voltage (NCV)	-
Signal indications	LEDs and audible beep
Operating Frequency	Energized: 6.25 kHz
Operating Frequency	De-Energized: 32.768 kHz
Acoustic Indication	Audible beep
Range Detection (Open air)	-
		Current Output of signal (typical)	Energized circuit: HI mode: 60 mA RMS LO mode: 30 mA RMS
		Current Output of signal (typical)	De-energized circuit: HI mode: 130 mA RMS LO mode: 40 mA RMS Loop mode: 160 mA RMS
		Signal voltage output (nominal)	De-energized circuit: LOW: 29 V RMS, 120 Vp-p HIGH: 33V RMS, 140 Vp-p With CT-400-EUR: loop mode: 31 V RMS, 120 Vp-p
Dimensions (L x W x H)	Approx. 183 x 93 x 50 mm (7.2 x 3.66 x 1.97 in)
Weight	Approx. 0.57 kg (1.25 lb)

Beha-Amprobe TL-8000-EUR Test Lead and Accessory Kit Technical Specifications

Measurement Category	CAT IV 600 V (test leads and alligator clips )
Measurement Category	CAT II 1000V (test probes)
Operating voltage and current	600 V, 10 A max. (red/black leads), 600 V, 6 A max. (green lead)
Operating voltage and current	600 V, 10 A max. (alligator clips), 1000 V, 8 A max. (test probes)
Operating temperature	0 °C to 50 °C (32 °F to 122 °F)
Operating Humidity	95%: 10 °C to <30 °C (50 °F to <86 °F)
	75%: 30 °C to <40 °C (86 °F to <104 °F)
	45%: 40 °C to <50 °C (104 °F to <122 °F)
Storage temperature and humidity	-20 °C to 60 °C (-4 °F to 140 °F), ≤ 95% RH
Operating altitude	2000 m (0 to 6561 ft)
Pollution degree	2
IP Rating	IP 20
Drop test	1 m (3.28 ft)
Dimensions	Red/black leads: 1 m (3.28 ft), Green lead: 7 m (22.97 ft)
	Alligator clips: approx. 95 x 45 x 24 mm (3.74 x 1.77 x 0.94 in)
	Test probes: approx. 134 x 23 x 14 mm (5.28 x 0.91 x 0.55 in)
Weight	Approx. 0.4 kg (0.88 lb)
Contents	2 x 1 m test leads (red, black) 1 x 7 m test lead (green) 2 x alligator clips (red, black) 2 x test probes (red, black)