Note: the Genny4 included with this pack requires the use of a CAT4 cable avoidance tool in order to operate. These are sold separately and recommended products can be found in the 'you might also be interested in' box to the left.
Made for use by electricians, this Genny4 kit comes with a signal generator, live plug connector (UK plug), 100mm (4") signal clamp and a soft carrying bag to store everything inside.
The accessories are made for direct integration into the Genny, which includes a port for this purpose.
Radiodetection Genny4 Signal Generator
The Genny4 is used to generate a wide variety of signals that can be used to determine the location of underground utilities that do not generate their own signals. The generated signal is picked up by a CAT4 cable avoidance tool (sold separately) and allows the user to determine the map of a cross-section of the ground.
The CAT and Genny combination should be used at all times to make sure both signal-generating and non-signal generating utilities are located and excavation can take place safely without the risk of accidentally striking an underground utility.
Key features of this item include:
- Portable, lightweight design with carrying handle
- Accessory compatibility
- Generates a standard 33kHz signal output
- Small Diameter Locate function for locating telecoms and street lighting (including spurs)
- Adjustable Signal Boost function (up to factor of 10)
- Runs on 4 x D-cell batteries
- Built-in loudspeaker and accessory storage tray
Live Plug Connector (UK)
This connector allows the user to connect Genny4 signals directly onto power distribution systems without the need to isolate the supply before making the connection.
100mm (4") Clamp
Plug this signal clamp into the Genny4 and connect to a pipe or cable up to 100mm in diameter to couple Genny4 signals onto the cable/pipe without interrupting the supply.
Genny4 accessories are also designed to be reverse-compatible with Genny3 products from Radiodetection.
Radiodetection Genny4 Technical Specifications
|Signal Output Power||0.1W|
|Signal Boost Output Power||1.0W|
|Induction Mode Signal Characteristic||33kHz|
|Direct Connection/Clamp Signal Characteristic||33kHz & Small Diameter Locate frequency
Automatic impedance matching on connection
|Batteries||4 x LR20 (D) 1.5V Alkaline|
|Warranty||12 Months from Purchase|