Choose a free accessory with a multifunction tester.Shop Now
Complete testing of fluorescent lighting is made easy with Fluke's 1000FLT.
Including 5 essential lighting test types, the 1000FLT can perform a lamp test that can test bulbs without removing from a fixture, performs a ballast test to determine if ballast is working correctly, has a non-contact voltage detector to determine if there's voltage present, has a pin continuity test to check filaments for continuity and also performs a ballast-type test that determines if the ballast is electronic or magnetic.
As many lights are high up on the ceiling or on the wall, the 1000FLT has been designed to survive drops of up to six feet (2 metres) and comes as standard with a 3 year warranty for peace of mind. It also has both a bright indicator light and an audible alert that informs you of testing results.
|Lamp Test Max Output||3000V peak-peak|
|Ballast Type Discriminator||≤3m (10ft) distance|
|Pin Continuity Test||<1kΩ|
|NCV (VoltAlert)||85 to 400V AC
45 to 67Hz
≤10cm (4in) distance
|Temperature||Operating: -10 °C to +50 °C (14 °F to +122 °F)
Storage: -40 °C to +60 °C (-40 °F to +140 °F)
|Relative Humidity||85% maximum|
|Size||21.5 x 3.0 x 6.5cm (8.5 x 1.2 x 2.6in)|
|Battery Type||4 x AA alkaline IEC LR6|
|Battery Life||40 hours|
|Auto Power off||20 minutes after non use|
|Low Battery Indicator||Power button light blinks when power is low (typically 85% of capacity depleted)|
|Electromagnetic Environment||EN61326-1: Portable|
|Electromagentic Compatibility||CE CISPR 11: Group 2, Class A
Group 2 contains all ISM RF equipment in which
radio-frequency energy in the frequency range 9 kHz
to 400 GHz is intentionally generated and used or
only used, in the form of electromagnetic radiation,
inductive and/or capacitive coupling, for the treatment
of material or inspection/analysis purposes
Class A equipment is suitable for use in nondomestic
locations and/or directly connected to a
low-voltage power supply network.
US FCC Part 15 Subpart B – exempt as test equipment
per clause 15.103
Korea only Class A Equipment (Industrial Broadcasting
& Communication Equipment)1
1This product meets requirements for industrial (Class A)
electromagnetic wave equipment and the seller or user
should take notice of it. This equipment is intended for use in
business environments and not to be used in homes.
|Resistance to Impact||2m drop|
We'd really appreciate it if you'd review this product
Why not leave a review of this product? Reviews help us improve our service for customers looking for a product to make a decision.
Review by ricdan (Posted on 11/10/2015)
very useful saves a lot of time when dealing with several lighting faults
Do you have a question or found it cheaper? Contact us