Call 01642 931329 for Orders & Advice

Fluke 1663 Multifunction Tester, Free 324 Clamp Meter & DMS Software

Fluke 1663 Multifunction Tester, Free 324 Clamp Meter & DMS Software
sku: 5003381
Over 10 In Stock

Free UK Delivery On Orders Over £40
  • The included Fluke 1663 Multifunction Installation Tester has been optimised for professional installers
  • The FREE Fluke 324 Clamp Meter is ideal for commercial and residential electricians
  • Data acquired by the Fluke 1663 can be managed and organised into reports using Fluke’s FREE DMS Software

RRP: £1,195.00
£740.00 Incl. VAT £888.00
RRP: £1,195.00
£740.00 Incl. VAT £888.00
Members earn 1480 points

Do you have a question or found it cheaper? Contact us

  • 30M R2 Extension Wander Test Lead (PVC Cable Reel)
    £29.99
  • Silvertronic 3 Wire Silicone Test Lead Set
    £21.95
  • UNI-T UT107 Multimeter & UT210B Clamp Meter Bundle
    £68.00
Description

Fluke 1663 Multifunction Tester, Free 324 Clamp Meter & DMS Software Details

1663/324/DMS Promo

*** PLEASE NOTE: offer available for a limited time only, subject to availability or while stock lasts.***

The Fluke 1663 Multifunction Tester, Free 324 Clamp Meter & DMS Software Kit includes:

  • 1x Fluke 1663 Multifunction Installation Tester with Accessories
  • 1x FREE Fluke 324 True-RMS Clamp Meter with Accessories
  • 1x FREE Fluke DMS Software

For further information regarding the products included in this kit, please see the following descriptions.

Fluke 1663 Multifunction Installation Tester Description

The Fluke 1663 Multifunction Installation Tester can be used to troubleshoot electrical systems. It is designed for professional installers and as a result, features the following testing capabilities:

  • Continuity test at L-N, L-PE and N-PE inputs
  • Type B/B+ RCD test
  • Earth resistance test
  • Measure True-RMS AC and DC Voltage and frequency
  • Wiring polarity check (detects broken PE and N wires)
  • Insulation resistance measurements
  • Continuity and resistance measurements
  • Measure motor windings with continuity test (at 10mA)
  • Loop and line resistance test
  • Measure prospective earth fault current (PEFC/IK)
  • Measure prospective short-circuit current (PSC/IK)
  • Test RCD trip time
  • Measure the RCD trip current (ramp test)
  • Combined test for Type A and AC RCDs’ trip time and current
  • Measures RCD variable current
  • Phase sequence test (with indicator)

This instrument also features automatic RCD test sequences and an array of selectable test voltages including 50V, 100V, 250V, 500V and 1000V. Additionally, the Fluke 1663 Multifunction Installation Tester includes an auto-start function for RCD and loop test, as well as a self-test function to ensure functionality.  These features add to both the reliability of the Fluke 1663’s readings, as well as its ease and efficiency of operation.

Ease-of-use is all but guaranteed as a result of the Fluke 1663 Multifunction Installation Tester’s intuitive interface which can be navigated by professional installers of all experiences. Moreover, this instrument features a compact, lightweight design and is supplied with a padded carrying and waist strap, thereby improving the ease with which this instrument can be handled and therefore operated.

This instrument is also supplied with a hard carrying case, remote probe and lead, as well as a zero adapter. This final accessory helps to improve the accuracy of the Fluke 1663 Multifunction Installation Tester’s measurements as it compensated for resistance present in test leads and mains cords.

Measurements acquired by the Fluke 1663 Multifunction Installation Tester are indicated on its illuminated display and can be saved to the tester’s onboard memory. In addition to this, loop tests are saved to the Fluke 1663 Multifunction Installation Tester’s Z-max memory which facilitates easy evaluation of the highest loop test value. 

Data can be transferred to the user’s PC via the IR-USB interface so that it may be organised, exported and/or printed using the included free Fluke DMS Software.

The Fluke 1663 Multifunction Installation Tester is ideal for testing electrical installations in accordance with local regulations. Test results acquired using this instrument can be saved and processed to ensure complete documentation for each electrical circuit under investigation. It is the ideal, easy-to-use troubleshooting tool for professional installers.

Fluke 1663 Multifunction Installation Tester Key Features

  • Troubleshoot electrical systems
  • Optimised for professional installers
  • Includes a comprehensive array of testing capabilities
  • Continuity test at L-N, L-PE and N-PE inputs
  • Type B/B+ RCD test
  • Earth resistance test
  • Measure True-RMS AC and DC Voltage and frequency
  • Wiring polarity check (detects broken PE and N wires)
  • Insulation resistance measurements
  • Continuity and resistance measurements
  • Measure motor windings with continuity test (at 10mA)
  • Loop and line resistance test
  • Measure prospective earth fault current (PEFC/IK)
  • Measure prospective short-circuit current (PSC/IK)
  • Test RCD trip time
  • Measure the RCD trip current (ramp test)
  • Combined test for Type A and AC RCDs’ trip time and current
  • Measures RCD variable current
  • Phase sequence test (with indicator)
  • Automatic RCD test sequences
  • Selectable test voltages: 50V, 100V, 250V, 500V and 1000V
  • Auto-start function for RCD and loop tests
  • Self-test function to ensure reliability
  • Easy-to-use
  • Intuitive interface
  • Compact, lightweight design
  • Supplied with a padded carrying and waist strap
  • Easy-to-handle
  • Supplied with a hard carrying case
  • Supplied with a remote probe and lead
  • Supplied with a zero adapter
  • Illuminated display
  • Onboard memory
  • Loop tests are saved to the integrated Z-max memory
  • Z-max memory facilitates the easy evaluation of the highest loop test values
  • IR-USB interface
  • Safety rated CAT III 500V and CAT IV 300V
  • Ideal for testing electrical installations in accordance with local regulations
  • Test results can be used to provide complete documentation of electrical circuits
  • An easy-to-use troubleshooting tool for professional installers

What’s Included with the Fluke 1663 Multifunction Installation Tester?

  • Fluke 1663 Multifunction Installation Tester
  • 6x AA Cell Batteries
  • C1600 Hard Carrying Case
  • Zero Adapter
  • Heavy-Duty Mains Cord
  • STD Standard Test Lead Set
  • Padded Carrying and Waist Strap
  • Quick Reference Guide
  • TP135X Remote Control Probe and Lead Set
  • User Manual on CD-ROM

FREE Fluke 324 True-RMS Clamp Meter Description

Like the above Fluke 1663 Multifunction Installation Tester, the Fluke 324 True-RMS Clamp Meter can be used to troubleshoot electrical systems. It can measure the following electrical parameters:

  • True-RMS AC current up to 400A
  • True-RMS AC/DC voltage up to 600V
  • Resistance up to 4KΩ (with continuity detection)
  • Capacitance up to 1000µF
  • Temperature: -10°C to 400°C / 14°F to 752°F

True-RMS readings allow the user to measure non-linear signals. The Fluke 324 True-RMS Clamp Meter’s measurement capabilities make it suitable for verifying the presence of load current as well as AC voltage and continuity. It can also be used to investigate switches, fuses and contacts.

Measurements can be retained on the clamp meter’s large, backlit display using the Hold function, allowing the user to record readings as necessary.

With regards to its ergonomics, the Fluke 324 True-RMS Clamp Meter is slim and compact ensuring that it is easy-to-handle and can be used to measure circuits located in tight, difficult-to-access spaces. Its rugged casing and CAT III 600V, CAT IV 300V safety rating also make it suitable for use in a variety of challenging environments.

The Fluke 324 True-RMS Clamp Meter provides the user with reliable, noise-free measurements for a variety of electrical parameters. This tool is of particular use to commercial and residential electricians requiring an instrument for general purpose troubleshooting.

Fluke 324 True-RMS Clamp Meter Key Features

  • Troubleshoot electrical systems
  • Can be used to measure an array of electrical parameters
  • True-RMS AC current up to 400A
  • True-RMS AC/DC voltage up to 600V
  • Resistance up to 4KΩ (with continuity detection)
  • Capacitance up to 1000µF
  • Temperature: -10°C to 400°C / 14°F to 752°F
  • Measure non-linear signals
  • Suitable for verifying the presence of load current, AC voltage, and continuity
  • Can be used to investigate switches, fuses and contacts
  • Large, backlit display
  • Hold function
  • Slim and compact
  • Easy-to-handle
  • Can be used to measure circuits in difficult-to-access and/ or tight spaces
  • Rugged casing
  • CAT III 600V, CAT IV 300V safety rating
  • Provides reliable, noise-free measurements
  • Of particular use to commercial and residential electricians requiring an instrument for general purpose troubleshooting

What’s Included with the FREE Fluke 324 True-RMS Clamp Meter?

  • FREE Fluke 324 True-RMS Clamp Meter
  • Soft Carry Case
  • 2-Year Warranty from Fluke

FREE Fluke DMS Software Description

The Fluke DMS Software is a data management software program.  It can be used with the above Fluke 1663 Multifunction Installation Tester and facilitates the user’s ability to download data from his/her tester.

Once data has been downloaded to the user’s PC, the Fluke DMS Software can be used to organise measurements, conduct further analysis, export the information, and/ or create professional reports in accordance with a variety of local regulations.

This software is efficient, easy-to-navigate and can be set to English, German, French or Dutch.

The Fluke DMS Software is ideal for managing test results acquired by the Fluke 1663 Multifunction Installation Tester, as well as using these results to produce complete documentation for the appliance/ system under investigation.

Fluke DMS Software Key Features

  • A data management software program
  • Compatible with the above Fluke 1663 Multifunction Installation Tester
  • Facilitates the user’s ability to download data from his/her tester
  • Organise measurements
  • Conduct data analysis
  • Export the downloaded information
  • Create professional reports in accordance with a variety of local regulations
  • Efficient and easy-to-navigate
  • Can be set to display menus in English, German, French or Dutch
  • Ideal for managing test results acquired by the Fluke 1663 Multifunction Installation Tester
  • Results can be used to produce complete documentation for the appliance/ system under investigation

What’s Included in the Fluke 1663 Multifunction Tester, Free 324 Clamp Meter & DMS Software Kit?

  • 1x Fluke 1663 Multifunction Installation Tester with Accessories
  • 1x FREE Fluke 324 Clamp Meter with Accessories
  • 1x FREE Fluke DMS Software
Technical Specs

Part Code: 5003381
(Size: 891.6 KB)

Fluke 1663 Multifunction Tester, Free 324 Clamp Meter & DMS Software Kit

Please find below the technical specifications for the products included in this limited-time promotion. 

Fluke 1663 Multifunction Installation Tester Technical Specifications 

AC Voltage Measurement
Range 500 V
Resolution 0.1 V
Accuracy 45 Hz - 66 Hz 0.8% + 3
Input Impedance 360 kΩ
Overload Protection 660 V rms
Continuity Testing (RLO)
Range (autoranging) 20 Ω / 200 Ω / 2000 Ω
Resolution 0.01 Ω / 0.1 Ω / 1 Ω
Open Circuit Voltage >4 V
Insulation Resistance Measurement (RISO)
Test Voltages 50-100-250-500-1000 V
Accuracy of tTest voltage (at rated test current) +10%, -0%
Test Voltage 50 V
100 V
250 V
500 V
1000 V
Insulation resistance Range 20 MΩ /50 MΩ
20 MΩ / 100 MΩ
20 MΩ / 200 MΩ
20 MΩ / 200 MΩ / 500 MΩ
20 MΩ / 200 MΩ / 1000 MΩ
Resolution 0.01 MΩ / 0.1 MΩ
0.01 MΩ / 0.1 MΩ
0.01 MΩ / 0.1 MΩ
0.01 MΩ / 0.1 MΩ / 1 MΩ
0.01 MΩ / 0.1 MΩ / 1 MΩ
Test Current 1 mA @ 50 kΩ
1 mA @ 100 kΩ
1 mA @ 250 kΩ
1 mA @ 500 kΩ
1 mA @ 1 MΩ
Loop and Line Impedance (ZI)
Range 10 Ω / 0.001 Ω / High current mΩ mode
Resolution 0.01 Ω / 0.1 Ω / 1 Ω
Prosepctive Earth Fault Current, PSC Test
Range 1000 A / 10 kA (50 kA)
Resolution 1 A / 0.1 kA
Computation Prospective earth fault current (PEFC) or Prospective short circuit current (PSC) determined by dividing measured mains voltage by measured loop (L-PE) resistance or line (L-N) resistance, respectively.
RCD Testing, RCD Type Tested
RCD Type AC¹
G², S³
Model 1663

A

AC¹

 

Notes ¹Responds to AC 
²General, no delay
³Time delay
4Responds to pulsed signal
5Responds to smooth DC signal
Tripping Speed Test (ΔT) 
Current settings¹ 10-30-100-300-500-1000 mA – VAR
10-30-100 mA
Multiplier x ½, x 1
x 5
Measurement Range

RCD Type G  310ms

                       50ms

RCD Type S   510 ms

                       160 ms

Notes ¹1000 mA type AC only
700 mA maximum type A in VAR mode
VAR mode not available for type B.
RCD/FI-Tripping Current Measurement/Ramp Test (IΔN)
Current Range 30% to 110% of RCD rated current¹
Step Size 10% of IΔN²
Dwell Time

Type G 300 ms/ step

Type S 500 ms/ step

Measurement Accuracy ±5%
Specified trip current ranges (EN 61008-1) 50% to 100% for Type AC
35% to 140% for Type A (>10 mA)
35% to 200% for Type A (≤10 mA)
50% to 200% for Type B
²5% for Type B
Notes  ¹30% to 150% for Type A IΔN > 10 mA
30% to 210% for Type A IΔN = 10 mA
20% to 210% for Type B
Earth Resistance Test (RE)
Range 200 Ω / 2000 Ω
Resolution 0.1 Ω / 1Ω
Frequency 128 Hz
Output Voltage 25 V
Phase Sequence Indication
Icon icon phase sequence indicator Phase Sequence indicator is active.
General Specifications  
Size (L x W x H) 10 x 25 x 12.5 cm
Weight (including batteries) 1.3 Kg
Battery Size, Quantity Type AA, 6 ea.
Sealing IP-40
Safety Complies with EN61010-1 Ed 2.0 (2001-02), UL61010, ANSI/ISA –s82.02.01 2000 and CAN/CSA c22.2 No. 1010 2nd edition
Overvoltage CAT III / 500V; CAT IV 300V
Performance EN61557-1 to EN61557-7 Second Edition and EN61557-10 Second Edition

Fluke 324 True-RMS Clamp Meter Technical Specifications 

AC Current Range 40A/400A
Accuracy 1.5 % ± 5 digits
(45 Hz to 400 Hz)
Note: Add 2 %
for position sensitivity
DC Current Range -
Accuracy -
AC Voltage Range 600V
Accuracy 1.5% ± 5 digits
DC Voltage Range 600V
Accuracy 1.0% ± 5 digits
Resistance Range 400Ω / 4000Ω
Accuracy 1% ± 5 digits
Continuity ≤30Ω
Capacitance 100μF to 1000μF
Frequency -
AC Response True RMS
Contact Temperature -10.0 °C to 400.0 °C
(14.0 °F to 752.0 °F)
Size H x W x D (mm) 207 x 75 x 34
Max Wire Diameter 30mm (600MCM)
Weight 208g
Category Rating CAT III 600V
CAT IV 300V
Warranty 2 year

Fluke DMS Software Technical Specifications 

Processor Pentium® 4 or higher with support of all customary operating systems
Operating System Microsoft Windows® XP, Windows® 7, Windows® 8, Windows® 8.1, and Windows® 10
Memory 256 MB RAM
Hard Drive Memory 400 MB
Monitor Super VGA (800 x 600)
Drive CD-ROM/DVD
Input Device Mouse or compatible
Interface RS-232 for data transmission. USB by means of optional adapter cable (USB - RS-232).
Reviews

We'd really appreciate it if you'd review this product

Why not leave a review of this product? Reviews help us improve our service for customers looking for a product to make a decision.

No reviews have been found

Write Your Own Review

How do you rate this product? Required *

 
1
2
3
4
5
Value
Quality
Price