All Fluke Products

Fluke P3014-XXX-P Gas Deadweight Tester – With Pump

SKU
Fluke P3014-XXX-P
Rating:
0%
(0)
Call For Pricing

We require additional information before you purchase this product

Made to Order

or Call 01642 931 329 to discuss product options

The Fluke P3014-XXX-P Gas Deadweight Tester – With Pump is available in five variations with differing pressure ranges and measuring units. All these models have been optimised to calibrate pressure sensing instruments and can be used to check transducers, transmitters, gauges and pressure switches. For further information regarding the differences between these models, please see the table below.

Product Code Product Name  Pressure Range
P3014-BAR-P Fluke P3014-BAR-P Gas Deadweight Tester 10 bar with Pump 0.2 to 10 bar
P3014-KGCM2-P Fluke P3014-KGCM2-P Gas Deadweight Tester 10 kgf/cm2 with Pump 0.2 to 10 kgf/cm²
P3014-PSI-P Fluke P3014-PSI-P Gas Deadweight Tester 150 psi with Pump 3 to 150 psi
P3014-KPA-P Fluke P3014-KPA-P Gas Deadweight Tester 1000 kPa with Pump 20 to 1,000 kPa
P3014-MPA-P Fluke P3014-MPA-p Gas Deadweight Tester 1MPa with Pump 0.02 to 1 MPa

The Fluke P3014-XXX-P Gas Deadweight Tester includes an integrated hand pump allowing the user to create up to 300psi (20 bar) of pneumatic pressure. Alternatively, the user can connect an external gas source to the /NPT female external supply to create the necessary pressure.  In order to create the exact pressure required, the Fluke P3014-XXX-P Gas Deadweight Tester includes a high-quality needle for fine adjustments.

Precision is at the forefront of this product’s design; it has a standard accuracy of 0.015% which can be improved to 0.008%. In order to achieve this, the Fluke P3014-XXX-P Gas Deadweight Tester may be calibrated with regards to the user’s local gravity, ensuring that the effect of this force on the weight masses is accounted for when performing pressure measurements. Unless otherwise specified the Fluke P3014-XXX-P Gas Deadweight Tester will be calibrated to standard gravity, 980.665 cm/s².

Furthermore, the Fluke P3014-XXX-P Gas Deadweight Tester is supplied with an ISO 17025 accredited calibration certificate. In addition to this, the piston and cylinder assembly with a floatation indicator has been manufactured to the highest standards and as such has certified accuracies traceable to international standard laboratories, such as NIST (National Institute of Standards and Technology). The piston/ cylinder assembly has been designed to reduce the effects of distortion and thermal coefficients whilst ensuring stability and durability.

Once pressure has been generated, the user adds weight masses to the piston in order to balance the upward force causing the piston and assembly to rise. In order to determine the final pressure, he/she calculates the sum of the nominal pressure values marked on each of the weight masses. For further information regarding this method, please see the video below.

The weight masses supplied with this tester are constructed from series 3 non-magnetic austenitic stainless steel and, as indicated above, are inscribed with the nominal pressure value relative to the high- or low-pressure piston. The instrument’s serial number is also inscribed on these weight masses. They are stored in a robust weight box with a secure locking mechanism, ensuring that they can be easily and safely transported between worksites.

Also adding to the ease of transportation of this tester is its removable lid. Moreover, The Fluke P3014-XXX-P Gas Deadweight Tester’s mounted spirit level and adjustable feet mean that it can be set up in a variety of environments without compromising its accuracy. Furthermore, the test station design of this calibrator, the inclusion of O-rings and the supplied 1/8, 1/4, 3/8, 1/2 NPT and BSP adapters and M20 and M14 metric adapters, also add to the ease of this product’s setup; as a result  PTFE tape and wrenches are not required when adding additional modules to this tester. The Fluke P3014-XXX-P Gas Deadweight Tester is also supplied with spare seals.

The combination of this product’s design and accurate measurement capabilities make the Fluke P3014-XXX-P Gas Deadweight Tester- With Pump a practical, precise calibrator ideal for checking a wide variety of pressure sensing instruments.

Fluke P3014-XXX-P Gas Deadweight Tester – With Pump Key Features

  • Optimised for calibrating a wide variety of pressure sensing instruments
  • Ideal for calibrating transducers, transmitters, gauges and pressure switches
  • Available in five variations with differing pressure ranges and measurement units
  • The integrated hand pump can be used to generate pneumatic pressure up to 300psi (20 bar)
  • Alternatively, the user can connect an external  gas source to the /NPT female external supply
  • High-quality needle for fine pressure adjustments
  • Standard accuracy of 0.015% which can be improved to 0.008%
  • Calibrated to standard gravity (980.665 cm/s²)
  • Option to calibrate the tester to local gravity
  • Supplied with an ISO 17025 accredited calibration certificate
  • Piston and cylinder assembly includes a floatation indicator
  • Piston/cylinder assembly has been manufactured to the highest standards
  • Piston/cylinder assembly has certified accuracies traceable to international standard laboratories (NIST)
  • Piston/cylinder assembly has been optimised for stability and durability and to lower the effects of distortion and thermal coefficients
  • Generated pressure causes the piston/cylinder assembly to rise
  • The upward force is counter-balanced by adding accurately calibrated weight masses
  • Final pressure is determined by adding together the nominal pressure values on the weight masses
  • Weight masses are constructed from series 3 non-magnetic austenitic stainless steel
  • Weight masses are marked with the instrument’s serial number
  • Weight masses are inscribed with the nominal pressure value relative to the high- or low-pressure piston
  • Weight masses are stored in a robust weight box with a secure locking mechanism
  • Removable lid supplied
  • Mounted spirit level
  • Adjustable feet
  • Test station design
  • O-rings
  • Supplied with 1/8, 1/4, 3/8, 1/2 NPT and BSP adapters and M20 and M14 metric adapters
  • Supplied with spare seals
  • No need for PTFE tape or wrenches when attaching additional modules
  • Practical, precise calibrator ideal for checking a variety of pressure sensing instruments

What’s Included?

  • Your choice of Fluke P3014-XXX-P Gas Deadweight Tester – With Pump
  • Weight Masses
  • Removable Lid
  • ISO 17025 Accredited Calibration Certificate
  • Spare Seals
  • 1/8, 1/4, 3/8, 1/2 NPT and BSP Adapters
  • M20 and M14 Metric Adapters
Part Code4184396

Fluke P3014-XXX-P Gas Deadweight Tester – With Pump Technical Specifications

Accuracy 
Accuracy ±0.015% of reading (±0.008% optional)

*Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range.

Mass and PCU Materials of Construction 
Standard weight material Series 3 non-magnetic austenitic stainless steel
Weight density 7.8 g/cm³
Optional fractional weights Solution heat treated aluminium
Weight density 2.7 g/cm³
Piston Material Tungsten carbide
Cylinder Material Martensitic steel
Coefficient of Expansion 16.5 ppm/°C
General 
Test port adaptors 1/8, 1/4, 3/8 and ½ NPT or BSP
Instrument weight 24 lbs
Instrument size 17.5 W x 12 D x 8.5 H
Mass set weight (typical) 65 lbs
Minimum Standard weight Increments 1 psi, (0.1bar)
Built-in Pressure Hand Pump Max pressure 300 psi (20 bar)
0 Reviews Overall Rating

Write a Review

Write Your Own Review
You're reviewing:Fluke P3014-XXX-P Gas Deadweight Tester – With Pump
Your Rating

Subscribe to our Newsletter

International Order Form