Call 01642 931329 for Orders & Advice

GE Druck DPI 612 Flex Pro Pressure Calibrator

GE Druck DPI 612 Flex Pro Pressure Calibrator
sku: GE-DPI612-NM
MPN: DPI612_PFP_00

Free UK Delivery On Orders Over £40
  • Choice of pneumatic and hydraulic versions
  • Completely interchangeable pressure modules with no tools required
  • Intergated pressure pump, fast response touch screen and countless other useful features

Was: £2,905.00
You Save: £909.17
£1,995.83 Incl. VAT £2,395.00
Was: £2,905.00
You Save: £909.17
£1,995.83 Incl. VAT £2,395.00
2 Models In Stock
Members earn 3991 points

Do you have a question or found it cheaper? Contact us

Description

GE Druck DPI 612 Flex Pro Pressure Calibrator Details

Please note that the DPI 612 Flex Pro does not include a pressure module as standard – you can buy any of the compatible PM620 series pressure modules separately.

GE Druck’s DPI 612 Flex Pro is a complete pressure calibration solution, allowing you to pump, measure and analyse whatever you need to test.

The DPI 612 Flex Pro delivers incredibly high levels of accuracy and is available in both pneumatic and hydraulic pressure forms. The pressure range can be anywhere from 0 to 1000bar (depending on model) and can be re-ranged easily by simply screwing in the correct PM620 pressure module.

The two available models are as follows:

  • PFP-00: 0 to 100bar Pneumatic
  • HFP-00: 0 to 1000bar Hydraulic

With 31 different pressure modules available, re-ranging the unit is quick and simple in practically any environment. The modules can be swapped as needed without tools, seals or cables; just screw in or screw out whenever you need a different module.

The DPI 612 Flex Pro is built using over 30 years of innovations from GE Druck, incorporating the latest pressure technology for precise measurements and generation. The units are rugged, weatherproof and come with state of the art analogue and digital microelectronics, ensuring accuracy and processing power of the highest levels at all times.

All models in the DPI 612 series are equipped with a simple touchscreen for quick and easy access to testing procedures. Using the touchscreen, users can easily access the dashboard, select tasks, or access favourited functions at the touch of a screen. Tests can be setup in as little as three touches, helping you to work more efficiently in the field.

The DPI 612 Flex Pro is also a documenting pressure calibrator; it can calculate PASS/FAIL errors, document the results and is compatible with calibration software for full management of your data.

It doesn’t stop there either; the DPI 612 Flex Pro is equipped with a fast and efficient pump for pressure generation (pneumatic models) or an internal reservoir for hydraulic oil and water plus a priming pump (hydraulic models). They even have electrical capabilities and can measure/source mA, voltage, mV and more.

GE Druck DPI 612 Flex Pro Pressure Calibrator Key Features

  • Choice of two models – pressure range from 0 to 1000bar
  • Flexible pressure ranging – completely interchangeable pressure modules (31 different modules available) with no tools required
  • Accuracy from 0.005% FS
  • Leak-free, field-serviceable pressure connections – no tools or sealing required
  • Simple, efficient touchscreen operation – setup tests in 3 touches, access favourites and more
  • Documenting – automated calibration procedures, PASS/FAIL error analysis, multi-channel datalogging, 8GB (nominal) memory and compatibility with leading calibration and maintenance software such as GE’s 4Sight
  • Rugged, weatherproof design
  • Pneumatic pressure generation  – pneumatic version with simple select to convert from vacuum to pressure, plus high efficiency hand pump and volume adjuster
  • Hydraulic pressure generation – hydraulic version has an internal reservoir for hydraulic oil or water, plus a priming pump to expel air from the connected system and an intensifier to quickly and easily generate pressure
  • Fast generation – 20bar/300psi pneumatic or 1000bar/15000psi hydraulic pressure generation in less than 30 seconds
  • Generate 100bar/1500psi without potentially dangerous bottled gas
  • Ergonomic design with detachable hand/shoulder strap for use anywhere
  • Electrical capabilities – measure and source mA, mV, voltage and more with four 4mm sockets
  • Quick fitting – adaptors, hoses and all accessories can be easily fitted to the unit with no tools or sealing required with no leaks
  • Step and ramp mA output function
  • Pressure leak test
  • MAX/MIN mode
  • Relief valve captures the venting pressure of a relief valve
  • Scaling – scales the measured values into a process value

What’s Included?

If you selected the PFP (pneumatic) version:

  • GE Druck DPI 612 PFlexPro Calibrator
  • Battery Charger
  • Carrying Strap
  • Test Leads
  • User Guide
  • Standard Calibration Certificate (UKAS Calibration Available as an Optional Extra)

If you selected the HFP (hydraulic) version:

  • GE Druck DPI 612 HFlexPro Calibrator
  • Battery Charger
  • Carrying Strap
  • Test Leads
  • Fluid Bottle
  • User Guide
  • Standard Calibration Certificate (UKAS Calibration Available as an Optional Extra)
Technical Specs

Part Code: DPI612_PFP_00

GE Druck DPI 612 Flex Pro Pressure Calibrator Technical Specifications

Specifications DPI 612 pFlexPro - Pneumatic DPI 612 HFlexPro - Hydraulic 
Maximum working pressure 100 bar / 1500 psi pneumatic 1000 bar / 15000 psi hydraulic
Maximum vacuum -95% of atmospheric pressure N/A
Pressure media Non-corrosive gases De-mineralized water or mineral oil (ISO viscosity grade < 22). 100cc internal reservoir
Pressure connection Quick-to-fit connection system. G1/8 female and 1/8 NPT female adaptors are provided Quick-to-fit connection system with G1/8 female and 1/8 NPT female adaptors
Size and weight 350 mm x 170 mm x 160 mm ( 13.7 in x 6.7 in x 6.3 in) excluding accessories 4.1 kg (9 lb) including battery and pressure module 350 mm x 170 mm x 170 mm ( 13.7 in x 6.7 in x 6.7 in) excluding accessories 4.7 kg (10.4 lb) including battery and pressure module
Generation system Pressure/vacuum selector, high efficiency pump, pressure intensifier/fine adjuster, non-return valve, precision release valve Priming pump, pressure intensifier/fine adjuster, non-return valve, precision release valve

Reviews

We'd really appreciate it if you'd review this product

Why not leave a review of this product? Reviews help us improve our service for customers looking for a product to make a decision.

No reviews have been found

Write Your Own Review

How do you rate this product? Required *

 
1
2
3
4
5
Value
Quality
Price