This is an optional clamp-on probe for performing current load measurement using Hioki's range of power analysers (the 3169s, 3196 and PW3198).
It's a 100A voltage output sensor, and is designed for smaller applications such as inverter devices or commercial power lines.
Hioki 9660 Technical Specifications
|Rated Input Current||AC 100A|
|Rated Output Voltage||AC 100mV f.s.(AC 1mV/A)|
|Amplitude Accuracy||±0.3% ±0.02% (45 to 66Hz, f.s = rated primary current)|
|Phase Accuracy||±1° (at 45 to 5kHz) ±1.3° (over 90A)|
|Max Allowable Input||Continuous 130A rms (at 45 to 66Hz)|
|Frequency Characteristic||40Hz to 50kHz: ±1% or less (deviation from accuracy)|
|Max Rated Voltage to Earth||300V AC rms (insulated wire)|
|Core Diameter||15mm (0.59 inches)|
|Dimensions||46 x 135 x 21mm|