Martindale TB118KIT1 Gas Engineer Electrical Safety Kit

Important Note: In January 2018 the TB118 legislation was updated and now includes new guidance about electrical safety when working with electrical equipment, including points such as verification of mains earthing and safe isolation of circuits, and the effectiveness and importance of the earthing for Class 1 equipment before carrying out any work, as well as the safety of gas appliances to keep engineers safe from hazards.

Martindale TB118KIT1 Gas Engineer Electrical Safety Kit includes all the essential test tools for gas safety engineers:

EZ650 Earth Loop Impedance & Socket Tester

Martindale’s EZ650 Earth loop impedance & socket tester checks the earth loop impedance of the wiring under test and indicates the measured test range, where the wiring is faulty, the test will not be performed. It is supplied with an interchangeable 13A mains lead and TL88 3-way fused test leads with croc clips allowing it to be used in a variety of situations such as mains, light fittings, fused connections and distribution boards, junction boxes, and terminals.

Key Features

• Earth loop and polarity checker
• For socket and spur testing
• Simple verification of mains earthing
• Red/green LED indication
• Non-trip Earth loop impedance ranges: 0-1.7 - 5-10-100-200-500Ω
• Earth loop threshold accuracy: ±(10% + 0.3 Ω) - Measurement accuracy can be affected by highly inductive or capacitive loads distributed on the supply
• Voltage low indication: <195V ± 5% Voltage high indication: >270V ± 5%
• Earth neutral voltage high indication: >30V ± 5%
• Open earth indication: >500 Ω

LOKKITGAS1 Gas Engineer lockout kit

Allows you to safely lock off circuits before carrying out work, lockout-tag-out procedures are a vital part and practice in safe isolation and are required by the Electricity at Work Regulations and Gas Safe Register Technical Bulletin TB118.

Kit Includes

• 1 x Padlock with a unique key (PAD10R)
• 1 x LOKFS1 Universal fused spur isolation lock (LOKFS1)
• 1 x Yellow pushpin MCB lock, 10mm spacing (LOK10)
• 1 x Red pushpin MCB lock, 8mm spacing (LOK11)
• 1 x Black slimline isolation lock (LOK7)
• 1 x “Equipment Locked Out tag” which can be written on (TAG4)
• 1 x Black marker pen (LOKMP)
• 1 x Soft carry case (TC55)

VIPD138 Voltage indicator & proving unit kit

This kit includes everything you need to ensure reliable voltage testing providing a simple and effective solution to safe isolation and voltage detection procedures.

The VI13800 voltage indicator provides both AC and DC voltage indication from 50V to 400V assisted by LED visuals to give a clear indication. It features retractable shrouds and a finger guard to ensure safety measures are abided by.

The PD440 proving device can check AV/DC devices up to 500V and is designed to test and ensure your voltage indicator is working correctly, always check before and after testing.

VI13800 Key Features

• Voltage Range: 50-400V AC/DC
• LED Indication: +/-50,100,200,400 V
• Polarity & Voltage Indication: from 12V
• AC/DC voltage detection: automatic
• Range detection: automatic
• Response Time: <0.1s
• Frequency Range: DC, 0-65Hz
• Test Current: 3.5mA max at 400V AC/DC
• Heavy-duty, double-insulated cable
• Durable and extremely reliable

PD440 Key Features

• Output Voltage: Output: 440V nominal 50Hz nominal
• Suitable for: Drummond Test Lamps, Digital Multimeters, Low Impedance Voltage Testers (LCD)
• Battery powered

TC88 Soft carry case

This soft carry can be used to store the ET series multifunction tester.