All Martindale Products

Martindale TEK500 Microwave Leakage Detector

SKU
MARTEK500
Rating:
0%
(0)
Reward Points
:
159
£190.80 £159.00
2 in Stock
Advice & Support
Price Match Request
Martindale TEK500 Microwave Leakage detector in case

For a microwave leakage detector that is extremely straightforward to use, the Martindale TEK500 Microwave Leakage detector comes highly recommended. This particular instrument is most suited for being used with microwave ovens that are domestic or commercial. It also has an LED indicator that lets the user know when levels of leakage have been taken.

This microwave detector comes with a special self-testing feature that can simulate the input of real microwaves as a way of testing whether it is functioning correctly. The leakage tester can indicate levels of microwaves at 1, 5, and 10W/cm2. This Martindale instrument tests to the BS5175 safety standards.

Martindale TEK500 Microwave Leakage Detector

Part of the procedure for testing microwave ovens is to ensure that it is heating up correctly. Included with this microwave leakage detector are a digital thermometer and a beaker which are there to make sure that tests are carried out to the best of their abilities. These tests also include that this microwave detector is fully compliant with testing and safety requirements.

Also supplied with the Martindale TEK500 Microwave Leakage detector kit, as well as the leakage detector and digital thermometer, are a carrying case and a detailed instruction manual. To make the user’s job easier, the manual contains all of the necessary calculations that would ever be needed to accurately calculate the microwave output.

Frequency of Operation 2450MHz ± 25MHz
Threshold Accuracy ±1dB for a plane wave of all polarisations
Cardinal Points >1mW/cm2
>5mW/cm2
>10mW/cm2
Response to Step Input 2-3 seconds to reach 90% of steady state indication
Overload Capacity 50mW/cm2
Indicators LED (green) - battery OK
LED (yellow) - 1mW/cm2 - acceptable microwave leakage below safety limit
LEDs (red) at 5 & 10mW/cm2 and audible tone - hazardous microwave leakage above the safety limit
Cone Spacer The prescribed test distance of 50mm is achieved when the cone tip is in contact with the appliance
Operating Temperature -5°C to 40°C
Complies with BS EN 60335-2-25:2002
BS EN 60335-2-90:2002
Supply 9V alkaline battery, MN1604 or equivalent
Dimensions 145 x 64 x 30mm
Accessories related to this product:
0 Reviews Overall Rating
Write a Review
Write Your Own Review
You're reviewing:Martindale TEK500 Microwave Leakage Detector
Your Rating
Additional Information
SKU MARTEK500
Manufacturer Part Code MARTEK500
International Enquiry