All Metrel Products

Metrel USB / RS232 Converter

SKU
A1171
Rating:
0%
(0)
£12.00 £10.00
Was £17.15 £14.29
You Save £5.15 £4.29
2 in Stock
Price Match Guarantee & Advice

The Metrel USB / RS232 Converter facilitates a connection between the user's device and the USB port of his/her Apple or Windows PC/ laptop via an existing cable with a DB 9-pin male port (NOT included). 

This converter features a short cable and can connect one USB port and one standard RS-232 serial port. 

The Metrel USB / RS232 Converter is able to draw power via the USB port of the PC/laptop, removing the need for an additional power source and can support a data transfer rate of 500Kbps.

The Metrel USB / RS232 Converter is ideal for connecting the user's device to his/her PC via an existing cable with a DB 9-pin male port in order to facilitate data transfer. 

Metrel USB / RS232 Converter Key Features

  • Facilitates a connection between an RS-232 interface device and the USB port of an Apple or Windows PC/laptop via an existing cable with a DB 9-pin male port (NOT included)
  • Short cable
  • Can connect one USB port and one RS-232 serial port
  • Can be attached to any RS-232 cable with a DB 9-pin male port
  • Draws power from the USB port
  • No need for an additional power source
  • Can support a data transfer rate of 500Kbps
  • Compliant with the USB 1.1 version specification
  • Supports an RS-232 serial interface
  • Detects USB suspend
  • Plug & Play specification is supported
  • Ideal for connecting the user's tester to his/her PC in order to facilitate data transfer

What's Included?

  • Metrel USB / RS232 Converter
  • Software CD Driver
  • User Manual

System Requirements

The Metrel USB / RS232 Converter must be used with PCs/ laptops with the following specifications:

  • MAC or IBM compatible PC/ laptop
  • MS Windows 2000, XP, Vista, Windows 7, Windows 8 or higher
  • MAC 9.1 or higher
  • Available USB port
  • 64 Mb RAM or above
  • Pentium 233 MHz or higher
  • MUST be used with an existing RS-232 cable with a DB 9-pin male port

PLEASE NOTE the driver must be fully installed prior to connecting the Metrel USB / RS232 Converter to the PC/ laptop. 

Part CodeA1171
0 Reviews Overall Rating

Write a Review

Write Your Own Review
You're reviewing:Metrel USB / RS232 Converter
Your Rating

Subscribe to our Newsletter

International Order Form