Discontinued
or Call 01642 931 329 to discuss alternatives
The measurement range may not be maintained when mounting a differently sized contact point than the standard accessory. Zero-setting will not be possible if the contact-point diameter is too large for the plunger hole in the bottom face of the base. Parallelism adjustment with the bottom face of the base is required when mounting a flat contact point such as the flat/needle or carbide-tipped contact point.
SKU | Range | Resolution | Accuracy*¹ | Extension Rod | Indicator |
---|---|---|---|---|---|
MIT-547-217S | 0 - 200 mm / 0 - 8" | 0.01 mm / .0005" | ±20 µm / ±.001" | 4 pcs. (.5", 1", 2", 4") | 543-402B*² |
MIT-547-218S | |||||
MIT-547-258S | 0.001 mm / .00005" | ±5 µm / ±.0002" | 543-392B |
*¹Excluding quantizing error.
*²The measuring force of this indicator is different from that of the standard 543-402B.
SKU | 547-2XXS |
---|