All Norbar Products

Norbar TruCheck™ Plus Torque Measurement & Calibration Tools

SKU
Norbar-TruPlus
Rating:
0%
(0)
As low as £1,868.96 £1,557.47
Free UK Delivery* Delivery Options

UK - Zone 1 Orders

England, Wales & most of Scotland.

Free 3-5 Working Day1
Orders Over £99 & Selected Items

Economy 2-3 Working Day1
From £1.95

Tracked 2-3 Working Day
£4.95

Express Next Working Day
£7.95

Priority Next Working Day
£14.95 (Pre-Noon)
£19.95 (Pre-10:30am)

Saturday & Sunday
£14.95 (Pre-Noon)

UK - Zone 2 Orders

Highlands, Islands & Northern Ireland.

Free 3-5 Working Day1
Selected Items (Calculated at Checkout)

Economy 2-3 Working Day2
From £1.95

Tracked 2-3 Working Day
£9.95

International Orders

Delivery is calculated at checkout.


Note: Next day delivery is not guaranteed for orders placed after 3:00pm. Prices Ex VAT.

1, 2 See delivery page for more details.

Choose a Special Offer

  • Tolsen 46 Piece ¼” Socket Set
    Tolsen 46 Piece ¼” Socket Set (TS-TL19046)
    FREE
    £39.00
Price Match Guarantee & Advice
Free Tolsen 46pcs Socket Set

The Norbar TruCheck™ Plus Torque Measurement & Calibration Tools are cost-effective and simple alternatives to expensive and complicated torque wrench calibration systems. They are available in three models with different ranges and supplied accessories; please see the table below for further details.

Model Number Model Name  Range Supplied Accessories   Notes 
NOR-43222 Norbar 43222 TruCheck™ Plus Torque Measurement & Calibration Tool 10 - 350 N·m 1 ∕2" female square drive OBSOLETE - replaced by the Norbar TruCheck™ 2 Plus 350 (NOR-43525)
NOR-43231 Norbar 43231 TruCheck™ Plus Torque Measurement & Calibration Tool 100 - 1,000 N·m 27 mm male hexagon plus 3 ∕4" sq. dr. socket OBSOLETE - replaced by the Norbar TruCheck™ 2 Plus 1100 (NOR-43531)
NOR-43245 Norbar 43245 TruCheck™ Plus Torque Measurement & Calibration Tool 200 - 2,000 N·m 27 mm male hexagon plus 1" sq.dr socket Still available. 

The Norbar TruCheck™ Plus Torque Measurement & Calibration Tools have been designed to reduce the possibility of selecting an incorrect option which may result in an incorrect tool setting and, subsequently, joint failure. This ensures that these instruments can be used by individuals of varying experiences making them ideal for businesses wishing to perform in-house calibrations of torque wrenches.

Unlike their simpler sister products, the Norbar TruCheck™ Torque Measurement & Calibration Tools, these models feature a selection of three operating modes making them suitable for calibrating click wrenches, dial wrenches and electronic wrenches.

In addition to this, the Norbar TruCheck™ Plus Torque Measurement & Calibration Tools feature a Track mode for continuously monitoring the torque signal and a limiting feature. The limit feature allows the user to set target torques and torque tolerances; the instrument will then calculate whether the detected reading is within the tolerance range and will indicate this via a colour LED:

  • Yellow = below tolerance
  • Green = within tolerance
  • Red = above tolerance

Numerical torque measurements are viewable via the Norbar TruCheck™ Plus Torque Measurement & Calibration Tools’ four-digit, seven-segmented LED displays. Measurements can be displayed in either N.m, lbf.ft or lbf.in and are accurate to ±1% / ± 1 digit over the stated operating range.

Readings and tolerance results (high, within range, or low) can be outputted via the RS-232 serial data output and the included RS-232 lead. The Norbar TruCheck™ Plus Torque Measurement & Calibration Tools are also supplied with a carry case and calibration certificate (UKAS calibrations are available; please see ‘Accessories’ for details).

The Norbar TruCheck™ Plus Torque Measurement & Calibration Tools are comprehensive, cost-effective, convenient and simple-to-use torque wrench calibration tools.

Norbar TruCheck™ Plus Torque Measurement & Calibration Tools Key Features

  • Cost-effective and simple alternatives to complicated and expensive torque calibration systems
  • Reduce the possibility of selecting an incorrect option which may result in an incorrect tool setting and subsequent joint failure
  • Can be used by individuals of varying experiences
  • Ideal for businesses wishing to perform in-house calibrations of torque wrenches
  • Three operating modes
  • Suitable for calibrating click, dial and electronic wrenches
  • Track mode for monitoring the torque signal
  • Limiting feature: set a torque target and tolerance and the tool will calculate whether the reading is within, below or above the tolerance range
  • Tolerance readings are indicated via coloured LEDs
  • Yellow LED = below tolerance
  • Green LED = within tolerance
  • Red LED = above tolerance
  • Numerical torque measurements are indicated via the 4-digit, 7-segmented LED display
  • Three measurement units: N.m, lbf.ft and lbf.in
  • Accurate to ±1% / ± 1 digit over the stated operating range
  • Readings, measurement units and tolerance results can be outputted via the RS-232 serial data output
  • RS-232 lead included
  • Supplied with a carry case and calibration certificate
  • UKAS calibrations are available, please see ‘Accessories’ for details
  • Comprehensive, cost-effective yet convenient and simple-to-use torque wrench calibration tools

What’s Included?

  • Your Choice of Norbar TruCheck™ Plus Torque Measurement & Calibration Tool and Specified Accessories (see table)
  • RS-232 Lead
  • Carry Case
  • Calibration Certificate 

Accessories 

The Norbar TruCheck™ Plus Torque Measurement & Calibration Tools can be purchased with a UKAS calibration. If a UKAS calibration is purchased this will be provided in place of the standard calibration certificate. Please contact our sales team PRIOR to purchase for further information or to add an item listed below to an order. 

Product Code Product Name 
NOR-TCACC.CW UKAS accredited calibration - clockwise
NOR-TCACC. CW+CCW UKAS accredited calibration - clockwise and anticlockwise
NOTE: UKAS accredited calibration is from 5% to 100% of full scale for 43221, 43226, 43222 and 10% to 100% for 43230, 43231, 43237, 43244 & 43245.
NOR-50757 Power Tool Test Fixtures for TruCheck™ Plus with ranges up to 1000 N.m
NOR-50774 Power Tool Test Fixtures for TruCheck™ Plus with ranges up to 2000 N.m
NOR-50758 1000 N.m Joint Simulator Rundown Assembly
NOR-50775 2000 N.m Joint Simulator Rundown Assembly
Part Code43222

Norbar TruCheck™ Plus Torque Measurement & Calibration Tools Technical Specifications 

Technical Specification Models
NOR-43222 NOR-43231 NOR-43245
Weight 2.517 Kg n/a n/a
Dimensions 145.5mm deep x 150mm wide x 85mm high
Accuracy +/-1%, +/-1 digit over the stated operating range
Display 4 Digit, 7 segment LED. With update rate of twice per second (2Hz).
Temp Range - Operating +5°C to +40°C
Temp Range - Storage -20°C to +70°C
Auto Reset Hold Time 2 seconds
Electromagnetic Compatibility (EMC) Directive In conformance with EN 61326:1997.
Weight (for shipping) 3.2 Kg 4.8 Kg 5.26 Kg
Drive Size 1/2" 27mm male hexagon. Supplied with 3/4" square drive socket 27mm male hexagon. Supplied with 1" square drive socket

0 Reviews Overall Rating

Write a Review

Write Your Own Review
You're reviewing:Norbar TruCheck™ Plus Torque Measurement & Calibration Tools
Your Rating

Subscribe to our Newsletter

International Enquiry