Pressure Pumps & Comparators
-
Free UK DeliveryFluke P5510-2M Pneumatic Comparison Test Pump£2,618.40 £2,182.00- Pneumatic, benchtop pressure calibrator that facilitates the testing of gas pressure gauges against master test instruments
- Dual pressure and vacuum capabilities
- Highly accurate: high-quality needle valve for precise control
2182 Reward PointsPrice Match Guarantee4185651 -
Free UK DeliveryFluke 700HPP-XXX High Pressure Pneumatic Test Pump£3,651.60 £3,043.00- Generates up to 21MPa (3000 psi) of pneumatic pressure
- Available in three models with different test port adapters
- Rugged, portable, lightweight design
3043 Reward PointsPrice Match GuaranteeFluke 700HPP-XXX -
Free UK DeliveryFluke 700HPPK-XXX High Pressure Pneumatic Pump/ Comparator£5,535.60 £4,613.00- Available in three models with different test port adapters
- Can be used to generate and finely adjust pneumatic pressure up to 21MPA
- Optimised for use in the field and in the lab, so does not require an external pressure source
4613 Reward PointsPrice Match GuaranteeFluke 700HPPK-XXX -
Free UK DeliveryFluke P5515-140M Hydraulic Test Pump£6,338.40 £5,282.00- Hydraulic pressure comparator can create pressure up to 20000 psi (1400 bar)
- Both models compatible with distilled water, mineral oil and sebacate
- Acrylic reservoir and built-in drain
5282 Reward PointsPrice Match GuaranteeFluke P5515-140M -
Free UK DeliveryFluke P3011-XXX Vacuum Deadweight Tester – Without Pump£12,037.20 £10,031.00- Available in four models with varying vacuum ranges
- Optimised for testing and calibrating pressure instruments with ranges below atmospheric pressure
- Accuracy: ±0.015% of reading
10031 Reward PointsPrice Match GuaranteeFluke P3011-XXX -
Free UK DeliveryFluke P3011-XXX-P Vacuum Deadweight Tester – With Pump£13,000.80 £10,834.00- Available in four models with different vacuum ranges
- The built-in hand pump can be used to generate a vacuum to 90%
- Ideal for testing and calibrating pressure reading modules with ranges below atmospheric pressure
10834 Reward PointsPrice Match GuaranteeFluke P3011-XXX-P
About Pressure Pumps & Comparators
A pressure comparator is a convenient instrument for bench pressure calibration. Bench calibrations are performed to maintain reference conditions and to obtain the lowest possible uncertainties. The bench is also a convenient place to inspect, adjust, and repair the devices under test.
Hydraulic pumps convert electrical energy into fluid pressure by using an electric motor to drive the pump. The fluid pressure is then delivered by hydraulic fluid to cylinders and actuators and hydraulic motors at the required pressure level and volume.
A pneumatic pump is focused on the use of pressurised gas or air to move media. When pneumatic pumps are utilised for industrial applications, it involves the use of compressed inert gases or compressed air.
A wide variety of apparatus is available in this section to meet your requirements.
