The VIP PRO two pole voltage tester by Socket and See tests voltage ranges from 12 – 400V and has automatic AC/DC indication. It features twin colour coded LED’s for clear and easy to read indication.
The probe features a double insulated 1.4-meter lead which provides flexibility and prevents tangles, the probe tips comply with UK HSE GS38 safety regulations.
- Complies to the UK HSE GS38 probe tip safety requirements
- Suitable for use with Gauntlets/PPE equipment
- Conforms to CAT IV 600 standards
- No batteries required
- Double insulated lead 1.4 metres
- Conforms to EN 61010 and BS EN 61243-3:2010 standards
The Socket & See SP200 proving unit can test two pole volt testers including multimeters and test lamps and is capable of generating AC waveform for true and accurate measurements. The unit is compact and light to carry around with you so you can perform safety tests before and after voltage checks to ensure your voltage testers are working correctly and giving accurate readings.
LED’s indicate the voltages in which are being generated from 50-100-230-400-690V and a low battery indicator will light to show when batteries need replacing to ensure you’re getting accurate results every time you perform tests.
- Socket & See SP200
- Socket & See VIP Pro
- Instruction Manual
Socket & See VIP PRO Two Pole Voltage Tester & SP200 Proving Unit Kit Technical Specifications
|Operating Voltage Range||12 – 400V|
|LED Indication||12 – 50 – 110 – 230 – 400V|
|AC / DC Indication||Automatic|
|Overvoltage Category||CAT IV 600V|
|Output Voltage||50 – 690V in five steps (50V, 100V, 230V, 400V, 690V)|
|Safety Compliance||BS EN 61010-1 : 2010|
|EMC Compliance||61326-1 :2006|
|Operating Conditions||-10 to +35°C at 95% RH|
|Output Frequency||50Hz Pseudo sine wave|
|Maximum Output Power||10W|
|Batteries||6 x LR6 AA alkaline batteries|
|Battery Life||10 hours with average use when testing high and low power testers|
|Weight||With batteries 350g|