Socket Testers & Adaptors

• Standard 4mm connectors to suit most types of multifunction testers
• Test R2 and R1+R2 without removing the leads
• Safety compliance with IEC 1010 ( CAT III 300V).

• Special design for quick installation and removal
• Straightforward and quick to use
• Lightweight and portable

• Simple, effective socket testing
• LED and audible indicators
• Extremely easy to use

• Fast and easy
• Audible signal
• Three LEDs

• Socket adaptor
• Test without removing the socket
• Safety compliant

• LED and audible indicators
• Detects 13 wiring fault conditions
• Suitable for use even on noisy circuits

• Ultraportable and compact, fits straight into plug sockets
• Uses high definition LEDs and an audible tone to indicate 14 wiring conditions
•  Drop proof from one metre

• Adapter IEC 60320 C6 on IEC 60320 C13
• Suitable for mains cable type C5 (according to IEC-60320-1)

• UK adaptor
• 3-Pin, Type G Plug
• Easy testing near Type G plugs

• Test all wall socket plugs and outlets
• Take quick R1 and R2 measurements
• Compatible with any meter that has a 4mm plug

Megger 25965-154 BNC Adapter Socket -  BNC to 2 x 4mm 50Ω

• Comes without plug or connector so that you can connect your own
• Simple wiring allows you to connect to any system you prefer
• Allows for loop and R1/R2 measurements

• 4mm earth connection
• Guarantee good earth

• Insulation testers
• Voltage measurement and monitoring
• Adaptors are available in B15, B22, E14, E27, GU10, or in a kit

• Plug into a socket to determine wiring status
• LED indicators
• British standard 3 pin plug design

• Quick, clear, easy testing of mains wiring
• Features patented ‘Fault Locate’ electronics
• Optimised for detecting dangerous wiring conditions such as reversed earth connections and disconnected wires

• Simple and effective identification
• Tri-coloured LEDs
• Rugged and reliable
• Easy to use

• Simple way to test correct wiring configuration in sockets
• Features LED indicators with text explanations
• Buzzer sounds if incorrect configurations are detected

Megger 1001-232 Plug Adaptor - IEC C6 - C13.

• Bright LEDs indicated correct installation and several common wiring errors
• The beeper indicates voltage detection as well as hazardous voltage
• RCD test button for checking the condition of RCD outlets

• Compatible with the MFT X1 series
• Colour-coded terminals and standard 4 mm terminals
• Maximum current of 300 V

• Facilitates R1 and R2 testing of standard UK socket outlets
• Colour-coded line, neutral, and earth connections
• Safety rated: CAT II 300V