Call 01642 931329 for Orders & Advice

Testo 300 Smart Flue Gas Analyser – Standard Kit Optional Printer

Testo 300 Smart Flue Gas Analyser – Standard Kit Optional Printer
sku: Testo300-SK

Free UK Delivery On Orders Over £40
  • Available in two versions with or without a Bluetooth/ IRDA Printer
  • Equipped with O₂ and CO sensors
  • Smart-touch interface for efficient testing 

RRP: £1,069.00
£849.00 Incl. VAT £1,018.80
RRP: £1,069.00
£849.00 Incl. VAT £1,018.80
Members earn 1698 points

Do you have a question or found it cheaper? Contact us

  • UNI-T UT107 Handheld Multi-Purpose Multimeter
    £39.00
  • Flood Duck Water Leak Alarms - Flock of Four
    £19.99
Description

Testo 300 Smart Flue Gas Analyser – Standard Kit Optional Printer Details

The Testo 300 Smart Flue Gas Analyser – Standard Kit Optional Printer is available in two versions. These kits differ in regards to the inclusion of a printer:

  • 0564 3002 70 – Testo 300 Smart Flue Gas Analyser – Standard Kit WITHOUT Printer
  • 0564 3002 71 – Testo 300 Smart Flue Gas Analyser – Standard Kit WITH Printer

For further information regarding the items included in each kit, please see the ‘What’s Included?’ section.

Testo 300 Smart Flue Gas Analyser Description

The Testo 300 Smart Flue Gas Analyser can be used to inspect heating systems. It is equipped with an O₂ sensor and a CO sensor and is capable of performing the following measurements:

  • O₂: 0 to 21 vol.%
  • Flue CO: 0 to 4000 ppm
  • Draught: -9.99 mbar to +40 mbar
  • Pressure: -100 mbar to +200 mbar
  • Temperature: -40°C to 1200°C

In addition to this, when used with a variety of OPTIONAL Testo accessories, the Testo 300 Smart Flue Gas Analyser can be used to measure:

  • Gas flow pressure
  • Differential temperature
  • Ambient CO
  • Gas pipe testing

The multi-function handle facilitates the user’s ability to attach a variety of quick-change probe shafts (available separately) thereby expanding the Testo 300’s scope-for-use. The operator can use the Testo 300 Smart Flue Gas Analyser to inspect flue gas pipes with larger diameters via the connection of a longer probe shaft; alternatively, he/she can check measurements for systems located in hard-to-reach areas via the addition of a flexible probe. The Testo 300 Smart Flue Gas Analyser is compatible with probes designed for Testo's previous 320 and 330 Analysers.

This instrument’s extra-strong magnets ensure that it is held in place throughout the measurement period, again extending its scope-for-use. The Testo 300 Smart Flue Gas Analyser is also supplied with a rechargeable battery able to supply the tester with up to ten hours of power; this adds to the Testo 300’s versatility, testing efficiency and longevity.

Testing efficiency is also improved by the Testo 300 Smart Flue Gas Analyser’s operating system and its draught and gas zeroing function. The aforementioned function allows the user to zero the meter whilst the (included) flue gas probe is in the flue pipe.

Additionally, when the Testo 300 Smart Flue Gas Analyser is placed in Standby mode the user does not need to wait until the zeroing phase is complete before commencing measurement; it is ready to use at the touch of a button.

As mentioned above the Testo 300 Smart Flue Gas Analyser features a fast and intuitive operating system. It has the same response time as a smartphone; for further information regarding the Testo 300 Smart Flue Gas Analyser’s smart-touch technology, please see the following video.

The user can view measurements and operate the analyser via the 5-inch HD display. The display is recessed, scratch-resistant and covered by a protective film ensuring that the Testo 300 can be used in rugged, challenging environments.

Multiple measurements and parameters can be viewed via the display simultaneously, and it is possible to track the progress of each parameter over the measurement period in the form of a graph. Clearly structured menus allow the user to access relevant data quickly and easily, whilst the Testo 300 Smart Flue Gas Analyser’s zoom function and customisability facilitate the user's ability to view and focus on the measurements most relevant to the application.

Data can be exported to a printer via the integrated Bluetooth interface. A compatible Testo Bluetooth/ IRDA printer is included in the Testo 300 Flue Gas Analyser – Standard Kit WITH Printer.

Alternatively, data, including measurements, customer details and site information, can be uploaded to the user’s PC and managed using the supplied Testo EasyHeat Analysis Software. This software can also be used to configure the Testo 300 Smart Flue Gas Analyser’s settings.

It is also possible to export data into an industry- or customer-specific software program** as the Testo 300 Smart Flue Gas Analyser is equipped with an interface function.

Conversely, rather than export data, it is possible to create PDF measurement reports and documentation, such as measurement protocols, containing details such as the measurement values, site locations and customer details on the Testo 300 Smart Flue Gas Analyser. Reports may be saved to the tester and/or may be sent to the user’s office PC, to colleagues or to customers via email (using WLAN).

Further to this, the Testo 300 Smart Flue Gas Analyser includes a signature function allowing clients to sign reports on the instrument, thereby improving testing efficiency and convenience. It also includes an integrated address book.

The Testo 300 Smart Flue Gas Analyser is an adaptable, reliable and practical tool designed to improve testing efficiency and convenience. It is ideal for professionals checking heating systems.

Testo 300 Smart Flue Gas Analyser Key Features

  • Suitable for inspecting heating systems
  • Equipped with an O₂ sensor and a CO sensor
  • O₂: 0 to 21 vol.%
  • Flue CO: 0 to 4000 ppm
  • Draught: -9.99 mbar to +40 mbar
  • Pressure: -100 mbar to +200 mbar
  • Temperature: -40°C to 1200°C
  • Gas flow pressure (OPTIONAL)
  • Differential temperature (OPTIONAL)
  • Ambient CO (OPTIONAL)
  • Gas pipe testing (OPTIONAL)
  • Multi-function handle facilitates connections to a variety of quick-change probe shafts
  • Inspect flue gas pipes with larger diameters via the connection of an OPTIONAL longer probe shaft
  • Check systems in hard-to-reach areas via the addition of an OPTIONAL flexible probe
  • Compatible with probes designed for the previous Test 320 and 330 Analysers
  • Equipped with extra-strong magnets
  • Magnets hold the tester in place throughout the measurement process
  • Supplied with a rechargeable battery
  • Battery life of up to 10 hours
  • Draught and gas zeroing function: the flue gas probe does not need to be removed from the flue pipe
  • Standby mode allows the user to operate the analyser without having to wait for the zeroing phase to be complete
  • Fast and intuitive operating system
  • Same response time as a smartphone
  • 5-inch HD display
  • The display is recessed, scratchproof and covered in a protective film
  • View multiple measurements and parameters via the display
  • View parameters as graphs
  • Clearly structured menus for quick data recall
  • Zoom function
  • Customise the display to show the measurements most relevant to the application
  • Export data to a printer via the integrated Bluetooth interface
  • Upload data to a PC
  • Organise data uploaded to a PC using the supplied Testo EasyHeat Analysis Software
  • Use the Testo EasyHeat Software to configure the Testo 300’s settings
  • Export data to an industry- or customer-specific software program** using the interface function
  • Create PDF measurement reports on the analyser
  • Create measurement protocols detailing measurement values, site locations and customer details on the analyser
  • Email reports via WLAN
  • Signature function
  • Integrated address book
  • An adaptable, reliable and practical tool designed to improve testing efficiency and convenience
  • Ideal for professionals checking heating systems

** Please Note: the manufacturer has to integrate an interface into the industry software to use the function

What’s Included?

0564 3002 70 - Testo 300 Smart Flue Gas Analyser – Standard Kit WITHOUT Printer

  • Testo 300 Smart Flue Gas Analyser
  • USB Mains Unit with Cable
  • Compact Basic Flue Gas Probe (180 mm, Ø 6 mm, Tmax. 500°C; 1.5 m hose; including dirt filters and cone for fixing)
  • 10x Spare Dirt Filters with Compact Probes
  • Testo EasyHeat Analysis Software
  • Carry Case

0564 3002 71 - Testo 300 Smart Flue Gas Analyser – Standard Kit WITH Printer

  • Testo 300 Smart Flue Gas Analyser
  • USB Mains Unit with Cable
  • Compact Basic Flue Gas Probe (180 mm, Ø 6 mm, Tmax. 500°C; 1.5 m hose; including dirt filters and cone for fixing)
  • 10x Spare Dirt Filters with Compact Probes
  • Bluetooth/ IRDA Printer (including 1x roll of thermal paper and 1x rechargeable battery)
  • Spare Thermal Paper with Indelible Ink
  • Testo EasyHeat Analysis Software
  • Carry Case
Product  Kit
Code  Name 056 3002 70 - WITHOUT Printer 0564 3002 71 - WITH Printer
0633 3002 70 Testo 300 Smart Analyser X X
0554 1105 USB Mains Unit with Cable X X
0600 9740 Compact Basic Flue Gas Probe X X
0554 0040 10x Spare Dirt Filters with Compact Probes X X
0554 3332 Testo Easyheat Analysis Software X X
0516 3001 Carry Case X X
0554 0621 Bluetooth/ IRDA Printer X
0554 0568 Spare Thermal Paper with Indelible Ink X
Technical Specs

Part Code: 0564 3002 70
(Size: 8.7 MB)

Testo 300 Smart Flue Gas Analyser Technical Specifications 

Measurement Parameter Measuring Range Accuracy (±1 Digit) Resolution 
O₂ measurement 0 to 21 vol.% ±0.2 vol.% 0.1 vol.%
CO measurement (without H₂ compensation) 0 to 4,000 ppm ±20 ppm (0 to 400 ppm) 1 ppm
±5% of m.v. (401 to 2,000 ppm)
±10% of m.v. (2001 to 4,000 ppm)
Combustion ratio (calculated) - - 0.0001
Efficiency testing (Eta) 0 to 120% - 0.1%
Flue gas loss 0 to 99.9% - 0.1%
CO₂ determination (digital calculation from O₂) Display range 0 to CO₂ max. ±0.2 vol.% 0.1 vol.%
Draught measurement -9.99 to +40 mbar ±0.005 mbar (0 to 0.1 mbar) 0.001 mbar (0 to 0.1 mbar)
±0.02 mbar (0.1 to +3.00 mbar) 0.01 mbar (remaining meas. range
±1.5% of m.v. (+3.01 to +40 mbar)
Pressure measurement -100 to 200 mbar ±0.5 mbar (0 to +50.0 mbar) 0.01 mbar
±1% of m.v. (+50.1 to +100.0 mbar)
±1.5% of m.v. (+100.1 to +200 mbar)
Temperature (instrument) -40 to +1,200°C ±0.5°C (0.0 to +100.0°C) 0.1°C (-40 to +999.9°C)
±0.5% of m.v. (remaining meas. range) 1°C (remaining meas. range)
Ambient CO measurement (internal/flue gas probe) 0 to 2,000 ppm ±10 ppm (0 to 100 ppm) 1 ppm
±10% of m.v. (101 to 2,000 ppm)
Ambient CO measurement (external with CO probe) 0 to 500 ppm ±3 ppm (0 to 29 ppm) 1 ppm
±10% of m.v. (30 to 500 ppm)
General Technical Data
Certification The testo 300 is TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) EN 50379, Parts 1-3
Storage temperature -20 to +50°C
Operating temperature -5 to +45°C
Charging temperature 0 to +45°C
Humidity application range 15 to 90% RH, not condensing
Power supply Rechargeable battery, USB mains unit
Rechargeable battery life 10 hrs
Protection class IP 40
Memory 1 mio. measurement values
Display 5.0" touch display, HD 1280x720 pixels, IPS (160 k)
Weight Approx. 800 g
Dimensions L: 244 mm (including probe connection) H: 59 mm W: 98 mm
Reviews

We'd really appreciate it if you'd review this product

Why not leave a review of this product? Reviews help us improve our service for customers looking for a product to make a decision.

No reviews have been found

Write Your Own Review

How do you rate this product? Required *

 
1
2
3
4
5
Value
Quality
Price