Choose a free accessory with a multifunction tester.Shop Now
Ideal for creating a wireless network that monitors gas concentration, the Crowcon Detective+ allows the user to create a fully comprehensive wireless network that transmits data from one Detective+ to the other units up to 100m away.
Please note that a Detective Net wireless module (sold separately) is required for direct wireless transmission. Standard wired connections are also possible using this detector.
This version of the Detective+ is capable of detecting methane (CH4), Oxygen (O2) and hydrogen sulphide (H2S). When a threshold is exceeded the Detective+ that picks up on this will emit an audible tone and shine extremely bright clustered LED indicators. If it is configured across a network, the detector that picks up on the gas content will transmit its data directly to all other units, allowing the user to trace the problem.
Crowcon's Detective+ is suitable for use in a wide variety of applications, including oil and offshore applications, stationed around gas equipment, in confined spaces, industrial spaces and much more. Thanks to its wireless nature, making a network with the detectors is non-obtrusive, easy to perform and gives comprehensive safety against gas.
Note: The Detective+ can be supplied non-pumped or pumped sensors. It can also come with a standard or extended battery.
|Size||640 x 455 x 455mm (25.2 x 17.9 x 17.9inches)|
|Visible Alarms||Three large, top mounted red LED clusters and a single red LED on control panel.
Alarm mode: LED clusters flash in quick succession. LED clusters of linked Detectives repeating the alarm, flash
slower than LED lights on those Detectives sensing the hazard
Normal working: Slow flashing green LED
Battery low: Rapid flashing green LED
|Audible Alarms||Wailing, omni-direction siren, 104 dBA at 1m|
|Display||High contrast LCD with back light. Values and units for up to 4 gases displayed simultaneously at current, TWA or
peak levels, low battery, real time and elapsed time calibration and configuration data also displayed
|Battery||Standard 6V, 7.2Ah, sealed lead acid battery pack
Optional 6V, 12Ah high capacity pack
|Battery Life||Up to 36 hours with flammable/ CO2 sensor fitted with 7.2Ah battery
Up to 60 hours with optional 12Ah battery pack
|Typical Response Times||Methane 20s, oxygen 10s, typical toxic gas 20s, IR 20s|
|Expected Sensor Life||Flammable 5 years, toxic 3 years, oxygen 2 years minimum, IR>5 years|
|Operating Temperature Range||20°C to +50°C (-4°F to 122°F)|
|Humidity||0-95% RH non-condensing|
|Approvals||Europe: ATEX II 2G EEx ib d IIC T4
International: IECEx EEx ib d IIC T4
|Standards||EN50014, EN50018, EN50020, EN50104, EN45544, IEC60079-0/-1 IEC60079-11|
|EMC||EN 50270, FCC CFR47 Part 15|
|PC Interface||Via RS232 lead. Portables PC software can be used to set alarms, clock, datalogging interval and password,
manages datalogging giving graphical display of instrument log file and allows to export to spreadsheet
|Calibration||Quick calibration using internal menu command, Portables PC or the Crowcon CheckBox IMH management system|
|Accessories||Baffle plate, interconnecting leads, RS232 communications lead|
|Sampling||Internal electric sampling pump option, manual aspiration|
We'd really appreciate it if you'd review this product
Why not leave a review of this product? Reviews help us improve our service for customers looking for a product to make a decision.No reviews have been found