ETI 822-950 Calibration Water Bath

The ETI 822-950 Calibration Water Bath can be used to calibrate thermometers and temperature probes using the comparison method. This compact, accurate, and reliable verification system has a temperature range of 25°C to 95°C, an accuracy of ±1°C (between 25°C and 70°C), and stability of ±0.1°C with a bath uniformity of ±0.1°C (when measured from the centre to any corner). The ETI 822-950 Calibration Water Bath's capacity is 5 litres and it includes a variable flow/ speed pump of 0 to 20 litres per minute. ETI recommend that you use a reference thermometer as a calibration reference. ETI also suggest using these fluids when the ETI 822-950 Calibration Water Bath is operating within the following temperature ranges:

• 25°C to 60°C, fill with distilled water
• 60°C to 80°C, fill with 15% glycerine water solution
• 80°C to 95°C, fill with a suitable silicone oil

Finally, the ETI 822-950 Calibration Water Bath is equipped with an LED display and requires minimal setup. It is a small, simple-to-use, precise temperature calibration system.

ETI 822-950 Calibration Water Bath Key Features

• Calibrate thermometers and temperature probes using the comparison method
• Compact, accurate, and reliable verification system
• Temperature range: 25°C to 95°C
• Accuracy: ±1°C (between 25° and 70°C)
• Stability: ±0.1°C
• Bath uniformity: ±0.1°C (when measured from centre to any corner)
• Capacity: 5 litres
• Variable flow/ speed pump: 0 to 20 litres per minute
• LED screen
• Minimal setup
• A small, simple-to-use, precise temperature thermometer

What’s Included?

• ETI 822-950 Calibration Water Bath