Fluke 3130 Portable Pneumatic Pressure Calibrator
* Buy a Fluke (Worth £150+ Ex VAT) and Choose a Free Fluke!
Available until 31/08/24. For more details and to see your choice of free Fluke tool - View Offer
Only available from authorised Fluke distributors, such as PASS Ltd. Terms and conditions apply.
The Fluke 3130 Portable Pneumatic Pressure Calibrator has been optimised to calibrate pressure transmitters, transducers and gauges. As such it is able to create, maintain and measure pressure, as well as read the output of the module that is being tested.
The Fluke 3130 Portable Pneumatic Pressure Calibrator includes an internal, motorised pump which facilitates its ability to generate vacuum or pressure without the need for hand pumping. The maximum pressure achievable using the internal pump is 2MPa (300 psi, 20 bar) and the maximum vacuum is -80kPa. Should the user find he/she needs to fill larger volumes with pressure; the Fluke 3130 may be used with an external gas supply (up to 2MPa) to generate the desired pressure. Furthermore, all created pressures can be finely adjusted using the variable volume.
As well as generating pressure, the Fluke 3130 can be used to measure pressure up to 2MPa (300 psi, 20 bar) to an accuracy of ±0.025% reading+ 0.01%FS. Alternatively, the Fluke 3130 Portable Pneumatic Pressure Calibrator may be used in conjunction with the Fluke 700P and 750P Pressure Modules in order to improve measurement performance.
In addition to creating and measuring pressure, the Fluke 3130 Portable Pneumatic Pressure Calibrator can be used to measure and provide current signals between 4 and 20mA, making it suitable for calibrating pressure transducers and transmitters. Its ability to measure voltages between 0 and 30V DC also helps with the calibration of these modules, whilst the Fluke 3130 Portable Pneumatic Pressure Calibrator’s ability to provide a 24V DC loop power supply makes it suitable for powering transmitters during closed loop calibrations.
Data acquired by the Fluke 3130 Portable Pneumatic Pressure Calibrator can be logged using Fluke’s Calibration Compass for Pressure Software (NOT included), which may also be used to send instructions to the calibrator. To perform these tasks the user must connect the Fluke 3130 Portable Pneumatic Pressure Calibrator to a PC using Fluke’s Calibration 700SC Serial Interface Cable Assembly (NOT included).
In terms of this product’s practicality, it includes a rechargeable, NiMH battery which facilitates the calibrator’s ability to perform 100 calibration cycles at 300 psi (when using the internal pump). This battery has an approximate lifespan of fifty hours, ensuring that the user can perform multiple calibrations without needing to recharge the power supply. Alternatively, the Fluke 3130 Portable Pneumatic Pressure Calibrator may be powered or re-charged using the included universal AC mains adapter.
The Fluke 3130 Portable Pneumatic Pressure Calibrator is suitable for use in rugged environments as it is built into a robust case, which includes space for storing and transporting the power supply, tests leads and fittings.
The Fluke 3130 Portable Pneumatic Pressure Calibrator is a durable, practical and versatile instrument that can be easily adapted to suit many pressure instrument calibration applications.
Fluke 3130 Portable Pneumatic Pressure Calibrator Key Features
- Calibrate pressure transmitters, transducers and gauges
- Can generate, control and measure pressure
- Can read the output of the instrument-under-investigation
- Internal, motorised pump for generating vacuum or pressure without the need for a hand pump
- Generate pressure from vacuum to 2MPa (300 psi, 20 bar)
- Generate vacuum to -80kPa
- Can be used with an external gas supply (up to 2MPa) to fill larger volumes with pressure
- Variable volume for fine pressure adjustments
- Measure pressure up to 2MPa (300 psi, 20 bar) to an accuracy of ±0.025% + 0.01%FS
- Can be used with Fluke’s 700P and 750P Pressure Modules
- Measure and generate current signals between 4 and 20mA
- Measure voltage between 0 and 30V
- Generate a 24V DC loop power supply for powering transmitters during closed loop calibrations
- Can be used in conjunction with Fluke’s Calibration Compass for Pressure Software (NOT included) to log data and send instructions
- To be used with the above software the calibrator must be connected to a PC using Fluke’s Calibration 700SC Serial Interface Cable Assembly (NOT included)
- Rechargeable, NiMH battery
- Capable of performing approximately 100 calibration cycles at 300 psi (using the internal pump) before battery supply requires charging
- Battery life of approximately 50 hours
- Power or recharge the calibrator using the included universal AC mains adapter
- Built into a robust casing
- The casing includes space for the power supply, test leads and fittings
- Durable, practical, versatile and adaptable
What’s Included?
- Fluke 3130 Portable Pneumatic Pressure Calibrator with Standard Calibration
- US, EUR, UK and China/ Australia Line Cords
Fluke 3130 Portable Pneumatic Pressure Calibrator Technical Specifications
| Environmental | |
| Operating temperature | -10 °C to +50 °C |
| Storage temperature | -20 °C to +60 °C |
| Power requirements | 12 V dc (Universal ac adapter/charger supplied) |
| Battery | Internal 3800 mAh advanced NiMH pack |
| Operating Time | |
| On full charge | Approx 50 hours (Measure only or external air; no pump) |
| Using internal pump | Approx 100 calibration cycles to 300 psi |
| Physical | |
| Dimensions | 15.25 in L x 12 in W x 7 in D |
| Weight | ~7 kg (15 lb) |
| EMI/RFI conformance | EN61326:2006 Annex A |
| Connectors/ports | 1/8 in NPT (External supply port and test port) |
| Included accessories | Manual, NIST-traceable certificate, test leads, universal ac adapter/charger |
| Ranges | |
| Pressure (internal pump) | -80 kPa to 2 MPa (-12 to 300 psi, -0.8 to 20 bar) |
| Pressure (external air) | 0 to 2 MPa (0 to 300 psi, 0 to 20 bar) |
| mA | 0 to 24.000 mA |
| Volts | 0 to 30.000 V dc |
| Engineering units | psi, bar, mbar, kPa, MPa, kgf/cm2, mmH2O @ 4 °C, mmH2O @ 20 °C, cmH2O @ 4 °C, cmH2O @ 20 °C, inH2O @ 4 °C, inH2O @ 20 °C, inH2O @ 60 °F, mmHg @ 0 °C, inHg @ 0 °C |
| Instrumental Measurement Uncertainty | |
| Pressure | ±(0.025 % of reading + 0.01 % FS) |
| mA | ±(0.015 % of reading + 0.002 mA) |
| Volts | ±(0.015 % of reading + 0.002 V) |
| Temperature Effect (all functions) | |
| No effect on accuracy on all functions from 15 °C to 35 °C | |
| Add ± 0.002 % F.S./°C for temps outside of 15 °C to 35 °C | |
| SKU | 3130-G2M |
|---|---|
| Manufacturer Part Code | 4317885 |
| Country of Origin | China |
Made to Order item: This item is made-to-order with a lead time once the order is placed. Once an order is placed it cannot be cancelled or returned unless the unit is found to be faulty.
