All Fluke Calibration Products

Fluke P5510/15-2700G Pressure Calibrators with Reference Pressure Gauges

SKU
Fluke P5510/15-2700G
Rating:
0%
(0)
Reward Points
:
12094
£12,094.80 £10,079.00
Made to Order Free UK Delivery*
Advice & Support
Price Match Request
Fluke P5510/15-2700G Pressure Calibrators with Reference Pressure Gauges
Buy a Fluke Get a Free Fluke Logo

* Buy a Fluke (Worth £150+ Ex VAT) and Choose a Free Fluke!

Available until 31/08/24. For more details and to see your choice of free Fluke tool - View Offer

Only available from authorised Fluke distributors, such as PASS Ltd. Terms and conditions apply.

The Fluke P5510/15-2700G Pressure Calibrators with Reference Pressure Gauges is a selection of products which includes one Fluke P5510 Pneumatic Pressure Calibrator; one Fluke P5515 Hydraulic Pressure Comparator and a selection of four or six accredited or unaccredited Fluke 2700G Reference Pressure Gauges.

These products can be used to calibrate pressure measuring instruments. Please see below for descriptions of the products included in this selection and a video introduction to these products. Further information regarding how to use these pressure comparators with reference pressure gauges, and information regarding the advantages and disadvantages of these tools compared to traditional deadweight testers, can be found in the PDFs attached to the Technical Specifications section.

551X Comparison Test Pumps and 2700G Series Reference Gauges: Introduction & Demo

Fluke P5510 Pneumatic Pressure Calibrator Description

The Fluke P5510 Pneumatic Pressure Calibrator is a gas pressure comparator which, when combined with the included Fluke 2700G Reference Pressure Gauges, acts as a pneumatic pressure calibrator, allowing the user to calibrate dial gauges, digital test gauges and pressure transmitters against a master test instrument: the Fluke 2700G Reference Pressure Gauges. Furthermore, the Fluke P5510 Pneumatic Pressure Calibrator’s lower range is extended when it is used in conjunction with the Fluke 2700G Reference Pressure Gauges.

This product has a bench mount design and is portable. It does not require an external bottle to generate pressure, as its built-in hand pump equips this gas pressure comparator with the dual capabilities of creating pressure up to 2MPa (300psi) and vacuums up to 27 inHg (915 mbar). Further to this, its fine needle vent valve enables the user to perform small adjustments and release pressure.

Finally, the Fluke P5510 Pneumatic Pressure Calibrator features test port adapters which can provide hand tight connections to common NPT, BSP, and metric fitting types, removing the need for PTFE tape or wrenches, adding to this product’s ease-of-use.

Fluke P5510 Pneumatic Pressure Calibrator Key Features

  • A gas pressure comparator, which, when used with Fluke 2700G Reference Pressure Gauges, is designed for the calibration of products optimised for the testing of gas pressures
  • Built-in pump which can be used to generate pressure or a vacuum
  • Pressure range: 0-300 psi (0-20 MPa)
  • Vacuum range: 0-27 inHg (0-915 mbar)
  • Fine Needle valve for precise adjustments and the releasing of pressure
  • Portable
  • Easy-to-use
  • Does not require an external bottle
  • Test port adapters provide hand tight connections to common NPT, BSP, and metric fitting types
  • Test port adapters remove the need for PTFE tape or wrenches
  • Compatible with Fluke 2700G Reference Pressure Gauges 

Fluke P5515 Hydraulic Pressure Comparator Description

Like the above Fluke P5510 Pneumatic Pressure Calibrator, the Fluke P5515 Hydraulic Pressure Comparator functions as a pressure calibrator when combined with the included Fluke 2700G Reference Pressure Gauges.

Another similarity between these two P5500 models is their bench mount, portable design, and test port adapters which remove the need for PTFE or wrenches, as they provide hand tight connections to common NPT, BSP, and metric fitting types. It also features a built-in pump enabling large volume applications and system priming, whilst its high-quality screw press can be used to create pressure up to 20000 psi (1400 bar) and enables fine pressure control.

This product is compatible with a variety of fluids including sebacate, distilled water, and mineral oil, and includes a built-in drain plug. The user can also view the fluid level and quality in the Fluke P5515 Hydraulic Pressure Comparator’s acrylic reservoir.

Therefore the Fluke P5515 Hydraulic Pressure Comparator is both easy-to-use and versatile.

Fluke P5515 Hydraulic Pressure Comparator Key Features

  • When used with Fluke’s 2700G Reference Pressure Gauges, the Fluke P5515 Hydraulic Pressure Comparator functions as a hydraulic pressure calibrator
  • It can be used to calibrate pressure measuring instruments
  • Bench mount, portable design
  • Test port adapters provide hand tight connections to common NPT, BSP, and metric fitting types
  • Test port adapters remove the need for wrenches and PTFE tape
  • Built-in pump for large-scale applications and system priming
  • High-quality screw press for pressure generation and fine pressure control
  • Can create a pressure of up to 20000 psi (1400 bar)
  • Compatible with sebacate, distilled water, and mineral oil
  • Built-in drain plug
  • Acrylic reservoir for the easy viewing of fluid level and quality
  • Standard O-ring Viton seals  

Fluke 2700G Reference Pressure Gauges Description

The Fluke 2700G Reference Pressure Gauges can be used to transform the above Fluke 5510 and Fluke 5515 pressure comparators into pressure calibrators. When used in conjunction with the above Fluke products these 2700G Reference Pressure Gauges act as the master instrument against which pressure measuring products can be calibrated

These reference pressure gauges are available in sets of four or six accredited or unaccredited sets. These sets are:

  • Unaccredited or accredited 4 set: 2700G-G70M, 2700G-BG7M, 2700G-BG2M, 2700G-BG200K
  • Unaccredited or accredited 6 set: 2700G-G70M, 2700G-G20M, 2700G-BG7M, 2700G-BG2M, 2700-BG700K, 2700G-BG100K

The Fluke 2700G Reference Pressure Gauges have a full-scale accuracy of 0.02% and are capable of taking pressure measurements in a range of units, such as bar, in H2O, kPa, MPa, and psi.  For further information about the ranges and accuracies available on these reference pressure gauges, please see the table below.

Model Range Resolution Uncertaintiy (k=2) Burst Pressure Media Compatibility
2700G-G70M 0 to 10 000 psi 0 to 70 MPa 1 psi 0.01 bar

Positive pressure ± 0.02 % FS

 

Vacuum ± 0.05 % FS    

15 000 psi 100 MPa Note 3
2700G-BG7M -12 to 1000 psi -80 kPa to 7 MPa 0.1 psi 0.001 bar 10 000 psi 70 MPa Note 2
2700G-BG2M -12 psi to 300 psi -80 kPa to 2 MPa 0.01 psi 0.001 bar 2000 psi 14 MPa Note 2
2700G-BG200K -15 to 30 psi -100 kPa to 200 kPa 0.001 psi 0.0001 bar 90 psi 0.6 MPa Note 1
2700G-G20M 0 to 3000 psi 0 to 20 MPa 0.1 psi 0.01 bar 10 000 psi 70 MPa Note 3
2700G-BG700K -12 psi to 100 psi -80 kPa to 700 kPa 0.01 psi 0.0001 bar 1000 psi 7 MPa Note 2
2700G-BG100K -15 psi to 15 psi -100 kPa to 100 kPa 0.001 psi 0.0001 bar 45 psi 0.3 MPa Note 1
Uncertainty includes linearity, hysteresis, repeatability, resolution, reference uncertainty, 1 year long term stability, and temperature effects from 18 to 28 °C. For temperatures from 0 °C to 18 °C and 28 °C to 50 °C, add 0.003% FS/°C
Media compatibility: Note 1: Any clean, dry non-corrosive gas Note 2: Any liquids or gases compatible with 316 stainless steel Note 3: Any non-flammable, non-toxic, non-explosive, non-oxidizing liquid or gas compatible with 316 stainless steel

 

These Fluke 2700G Reference Pressure Gauges also feature a multitude of functions, accessible and configurable via the easy-to-use interface. Some of these functions are:

  • Sampling Rate,
  • Tare Value,
  • Damping,
  • Auto-Off Time Interval
  • Min/Max Pressure

The user can also view the remaining battery life on the Fluke 2700G’s display.

Fluke 2700G Reference Pressure Gauges are battery operated but can also be connected to a line power supply, thereby extending the reference pressure gauges’ operational time and increasing their versatility.

The Fluke 2700G Reference Pressure Gauges have also been optimised to be robust and feature a rugged casing which protects these products from short falls and the elements, again extending their versatility-of-use.   

These reference pressure gauges are versatile and practical products, capable of being used with the above Fluke P5510 and Fluke P5515, and individually as check standards or to provide process measurements with data logging. These Fluke 2700G Reference Pressure Gauges are supplied with USB cables and can be used with COMPASS® for Pressure software (not included), which automatically records pressure calibration data.

With its multiple uses, functions and measurement units, as well as its easy-to-use interface and rugged design, the Fluke 2700G Reference Pressure Gauges are a practical addition to any toolkit.

Fluke 2700G Reference Pressure Gauges Key Features

  • Function as the master instrument when attached to the Fluke P5510 Pneumatic Pressure Calibrator or Fluke P5515 Hydraulic Pressure Comparator, and can be used to calibrate dial gauges, digital test gauges, and pressure transmitters
  • Separately the Fluke 2700Gs function as check standards or provide process measurements with data logging
  • Selection of four or six gauges with various ranges (please see above)
  • Accredited and non-accredited versions available
  • 0.02 % full-scale accuracy
  • Range of manually selectable engineering units including bar, in H2O, kPa, MPa, and psi
  • Easy-to-use interface featuring a multitude of functions such as sampling rate, tare value, damping, auto-off time interval, and the min/max pressure
  • Compatible with COMPASS® for Pressure software (not included)
  • Expands Fluke P5510’s lower range capability
  • Battery operated
  • Can view remaining battery life on the display
  • Also capable of using line power
  • Portable
  • Rugged casing  
  • Supplied with USB cable and universal power supply
  • Supplied test port is 1/4 NPT Male. 1/4 BSP and M20 X 1.5 adaptors  

What’s Included in the Fluke P5510/15 Pressure Calibrators with Reference Pressure Gauges?

  • Fluke P5510 Pneumatic Pressure Calibrator
  • Fluke P5515 Hydraulic Pressure Comparator
  • Your Choice of Four or Six Fluke 2700G Reference Pressure Gauges (Accredited or Unaccredited)

 

 

Fluke P5510/15-2700G Pressure Calibrators with Reference Pressure Gauges Technical Specifications 

Please find below the technical specifications for the products included in this selection. 

Fluke P5510 Pneumatic Pressure Calibrator Technical Specifications

Pressure Range  0 psi to 300 psi (2 MPa/ 20 bar)
Vacuum Range 0 in to 27 in Hg (915 mbar 90% vacuum)
Test Port Adapters M20 X 1.5, M14 X 1.5, 1/8, 1/4, 3/8, and 1/2 NPT and BSP (plus 1 additional 1/4 NPT adapter)
Weight 3.5 kg (7.5 lb)
Dimensions (W x D x H) 240 mm x 330 mm x 180 mm (9.5 in x 13 in x 7 in)

Fluke P5515 Hydraulic Pressure Comparator Technical Specifications 

Pressure Range 0 psi to 20,000 psi (140 MPa)
Test Port Adapters M20 X 1.5, M14 X 1.5, 1/8, 1/4, 3/8, and 1/2 NPT and BSP (plus 1 additional 1/4 NPT adapter)
Instrument Size (W x D xH) 440 mm x 300 mm x 215 mm (17.5 in x 12 in x 8.5 in)
Instrument Weight 16 kg (36 lb)
Reservoir Volume  150 cm3 (9.2 in3)
Screw Press Displacement  5.5 cm3 (0.34 in3)
Pump Displacement  4.7 cm3 (0.293 in) per stroke

Fluke 2700G Reference Pressure Gauge Technical Specifications 

Dimensions (H x W x D) 12.7 cm x 11.4 cm x 3.7 cm (5 in x 4.5 in x 1.5 in)
Pressure Connection  ¼ in NPT Male
Housing/Weight  Cast ZNAL/0.56 kg (1.22 lb)
Display  5-1/2 digits, 16.53 mm (0.65 in) high 20-segment bar graph, 0 to 100 %
Power  Three AA alkaline batteries
Battery Life  75 hours
0 Reviews Overall Rating
Write a Review
Write Your Own Review
You're reviewing:Fluke P5510/15-2700G Pressure Calibrators with Reference Pressure Gauges
Your Rating
Additional Information
SKU Fluke P5510/15-2700G
Manufacturer Part Code 4341788

Made to Order item: This item is made-to-order with a lead time once the order is placed. Once an order is placed it cannot be cancelled or returned unless the unit is found to be faulty.

International Enquiry