Important Notice
This item is made-to-order exclusively for you once your order is placed. As a result, it is not eligible for cancellation or return under our standard policy. Your statutory rights remain unaffected.
Free Tyre Inflator. Spend £1000+ (ex VAT) View
KIMO CT110 Optical and Contact Tachometer
- Dual capabilities - both a contact and non-contact tachometer
- HOLD and MAX/MIN modes
- Backlit screen and configurable automatic shutoff
SKU
K-CT110
MPN
CT 110
Measure RPM and associated parameters with ease with KIMO's CT110, a dual-function contact and non-contact tachometer!
This unit is supplied as standard with both an optical tachometry probe and a tip for contact measurements. As it can do both measurement types, the KIMO CT110 can be used in applications where a standard contact tachometer couldn't be used, allowing you to measure safely.
KIMO's CT110 tachometer can measure RPM (using the optical mode) from 0 to 60,000 RPM. In the contact mode, it can measure in RPM, m/min, ft/min, in/min and m/s across a range from 0 to 20,000RPM.
There's also a HOLD function included on the CT110 (freezes the current display temporarily), the ability to display MAX/MIN values taken over a period of time and this tachometer also has a built-in backlight and configurable automatic shutdown.
KIMO CT110 Optical and Contact Tachometer
- Dual capabilities - both a contact and a non-contact tachometer
- Contact mode - uses a light beam from a diode which is reflected by a rotating mirror located inside the probe head. A light sensitive cell detects the frequency of the signal of the beam which is proportional to the rotation speed
- Optical (non-contact) mode - a light beam is emitted from the diode of the probe and is reflected by a piece of reflective tape (included) on the measured elements. A light-sensitive cell detects the beam and translates it in frequency signal which is proportional to the tape rotation speed
- Optical mode measures in RPM only with measurement range from 0 to 60,000RPM
- Contact mode measures in RPM, m/min, ft/min, in/min or m/s with range from 0 to 20,000RPM
- HOLD function freezes current values shown on the screen
- Display the MAX/MIN measurements taken over a period of time
- Configurable automatic shutoff
- Backlit LCD screen
What's Included?
- KIMO CT110 Optical and Contact Tachometer
- Optical Tachomerty Probe (17mm Diameter, 195mm Length)
- Contact Tachometry Tip
- 50cm of Reflective Tape
- Calibration Certificate
- Transport Case
Technical Information
Specification
KIMO CT110 Technical Specifications
| Measuring Units | Measuring Range | Accuracy | Resolution |
|---|---|---|---|
| Optical Tachometer | |||
| RPM | 0 to 60,000 RPM | From 60 to 10,000 RPM: ±0.3% of reading ±1rpm From 10,001 to 60,000RPM: ±30 |
1RPM |
| Contact Tachometer | |||
| RPM, m/min, ft/min, in/min, m/s | From 0 to 20,000 RPM | From 30 to 20,000RPM: ±1% of reading ±1RPM | 1RPM |
| General Specifications | |||
| Measuring Elements | Optical: optical detection (phototransistor sighting distance: max 40cm) Contact: ETC adaptor for optical tachometry probe |
||
| Display | 4 lines, LCD technology. Size: 50 x 36mm 2 lines of 5 digits with 7 segments (value) 2 lines of 5 digits with 16 segments (unit) |
||
| Cable | Coiled, length: 0.45m. Extension: 2.4m | ||
| Housing | ABS Protection: IP54 |
||
| Keypad | 5 keys | ||
| Conformity | Directives CEM 2004/108/CE and NF EN 61010-1 | ||
| Power Supply | 4 x AAA, LR03, 1.5V batteries | ||
| Ambience | Neutral gas | ||
| Operating Temperature | From 0 to +50°C | ||
| Storage Temperature | -20 to +80°C | ||
| Automatic Shutoff | Adjustable from 0 to 120 minutes | ||
| Weight | 190g | ||
Document Downloads
KIMO CT110 Optical and Contact Tachometer - Datasheet
KIMO CT110 Optical and Contact Tachometer - User Manual
Additional Information
SKU
K-CT110
Manufacturer Part Code
CT 110
KIMO CT110 Optical and Contact Tachometer
£289.00
£346.80 inc vat
£289.00
£346.80 inc vat