Feeler, Radius & Thread Gauges
Offer
£6.95
£8.34 inc. vat
- 1-16mm or 15-30mm models
- Inch on the reverse side
- Clearly etched graduations
Offer
£9.10
£10.92 inc. vat
- 1.0mm & 0.5mm both sides
- Tempered steel
- Satin chrome finish
Offer
£11.80
£14.16 inc. vat
- Over ten sets
- Hardened, tempered and polished blades
- Nominal thickness marked
Offer
£14.40
£17.28 inc. vat
- 12” Length Steel Feeler Gauge Strip
- Size: 1/2” x 12”
- Twelve pieces in a box
Offer
£14.80
£17.76 inc. vat
- Size: 12.7mm x 305mm
- Twelve pieces
- Hardened and tempered to RC 48-62
Offer
£16.60
£19.92 inc. vat
- Internal & external screw threads
- Locking device at each end
- Metric & imperial models
Offer
£16.60
£19.92 inc. vat
- Penknife style
- Unified and Whitworth thread profiles
Offer
£20.40
£24.48 inc. vat
- 17 External and 17 Internal Leaves
- Total Range: 1-7mm
- 1-3mm in 0.25mm steps
- 3-7mm in 0.5mm steps
Offer
In Stock : Get It Next Working Day*
£22.89
£27.47 inc. vat
- Ascertain the width of narrow gaps
- Each leaf is detachable
- Each leaf is marked with its thickness
Offer
£25.40
£30.48 inc. vat
- High-quality steel
- Six models available
- Satin finish
Offer
£26.00
£31.20 inc. vat
- Tapered & Straight options
- Radiused ends
- Robust steel case
Offer
Discontinued
- Angles and edges are precision-ground
- Black-oxidized finish
Offer
£29.60
£35.52 inc. vat
- 25” Coils
- Size: 1/2” x 25’
Offer
£29.90
£35.88 inc. vat
- Metric or Imperial
- Internal and external radii
- Marked with nominal size
- Mounted on a ring or in a steel sleeve
Offer
£30.80
£36.96 inc. vat
- 7.6m Length
- Size: 12.7mm x 7.6m
- Single coils
Offer
£31.00
£37.20 inc. vat
- Locking clamp
- The radius size is stamped on each leaf
- Suitable for gauging small internal and external radii
Offer
£34.60
£41.52 inc. vat
- Accurately milled steel blades
- Internal and external thread forms
- Five sets available
Offer
£35.50
£42.60 inc. vat
- Thread pitch is stamped on each gauge
- Metric, Unified, and Whitworth screw pitch gauges
Offer
£38.60
£46.32 inc. vat
- M3 x 0.5mm up to M20 x 2.5mm, or M3-M12 set
- ISO Threads
- 6H Tolerance
- Red band on NO-GO end
Offer
Discontinued
- High-quality steel
- Satin chrome finish
- Non-Ferrous or Sheet, Plate Iron & Steel
Offer
Discontinued
- 1″ × 1″ permanent magnet
- Optional Fine Adjustment
- Upright column for mounting indicators
Offer
Discontinued
- Satin-chrome plated heavy-gauge
- Instant identification
- Three options available
Offer
£50.00
£60.00 inc. vat
- Size: 12.7mm x 127mm
- Twelve pieces
- Thicknesses are clearly etched every 6”
Offer
£52.20
£62.64 inc. vat
- NO-GO Thin body & Surface hole
- GO & NO-GO options
- M3 x 0.5mm to M20 x 2.5mm & 7 Piece Sets
About Feeler, Radius & Thread Gauges
A feeler gauge consists of several thin blades for measuring narrow gaps or clearances, mostly in engineering to measure the clearance between two parts.
A radius gauge, also known as a fillet gauge, is a tool used to measure the radius of an object. It is a hand-held tool with many precision rounded curves (radii) machined into its edges.
A thread gauge checks the dimensions of a specific thread form angle, pitch, and diameter. They are a reference tool in determining the pitch of a thread on a screw or in a tapped hole.
