Gauge Blocks
Offer
£22.00
£26.40 inc. vat
- Hardened and ground steel parallels
- Metric and Inch sizes
- Supplied in a wooden box
Offer
£34.20
£41.04 inc. vat
- Squareness .0002”
- Surface finish 6-10 microinches
- Size accuracy ± .0005”
- Matched accuracy ± .0002”
- Size of holes: 3/8” x 16 BSW
Offer
£71.60
£85.92 inc. vat
- Parallelism accuracy .0002”
- Matched pair accuracy .0003”
- Length: 6”
- Width: ⅛”
- Supplied in a deluxe fitted case
Offer
£76.20
£91.44 inc. vat
- Set of 10 blocks
- 3” long x 1/4” thick
- Accuracy is 0.0001” per inch
Offer
£77.00
£92.40 inc. vat
- Parallelism accuracy .0002”
- Matched pair accuracy .0003”
- 3/16” x 6” or ½” x 6” options
- Deluxe fitted case
Offer
Call For Pricing
- Matched Pair Accuracy: 0.005mm
- Reversible swing-away clamp
- Side slots
Offer
Call For Pricing
- Style A or B
- Hardened to Rockwell 60C
- Matched Pair Accuracy: 0.005mm
Offer
£123.00
£147.60 inc. vat
- Two sizes of steel Vee Blocks
- Matched and numbered
- Tough storage case
Offer
£134.40
£161.28 inc. vat
- Range 1˚ to 70˚ in 1˚ increments
- 3 x Vee Blocks: 10˚, 15˚, and 30˚
- 5 x Angle Plates: 1˚, 2˚, 3˚, 4˚, and 5˚
Offer
£162.00
£194.40 inc. vat
- 5 Tapped holes are 5/8” x 11 BSW
- Squareness .0002”
- Size accuracy ± .0005”
- Matched accuracy ± .0002”
Offer
£209.00
£250.80 inc. vat
- Maximum capacity, top 'V': 60mm dia
- Maximum capacity, bottom 'V': 12mm dia
- Parallelism of Vee to Base: 0.02mm
- Squareness Accuracy: 0.02mm
Offer
£394.00
£472.80 inc. vat
- DIN Grade II
- 11 Steel Gauge Blocks
- UKAS Calibration Certificate
Offer
£463.00
£555.60 inc. vat
- Imperial or Metric
- Heat treated to HRC65/HV820
- 36, 47, 81 & 87 piece sets
- Inspection & Workshop gades
Offer
£1,480.00
£1,776.00 inc. vat
- Metric, Grade 1
- Corrosion resistant
- 5-point UKAS Calibration Certificate
Page 1 of 1
About Gauge Blocks
Gauge blocks are suited to the purpose of setting a variety of measuring instruments. Precise measurements are possible as the tools allow for very accurate calibration of micrometers and other measurement tools. They can be used to very accurately measure objects or distances as well.
Typically constructed from high-grade steel or carbides that resist wear and damage. A gauge block is machined to have two perfectly flat sides within minuscule tolerances that are parallel to each other.
Machinists and others who use precision equipment have found many uses for gauge blocks, such as calibrating equipment and measuring devices. Gauge blocks apply for quality control purposes, such as testing machines and machined parts for precision and adherence to tolerance guidelines.
