Covid 19 News: Open as Normal
All Testo Products

Testo 300 Flue Gas Analyser w/ NOx Sensor & Printer - Limited Black Edition

SKU
TESTO300NOX
Rating:
0%
(0)
Reward Points (?)

Logged in, worth £26.36, read more.

:
2636
£1,581.60 £1,318.00

Choose a Special Offer

  • C.K Tools AVIT 5 x Insulated Screwdriver Set
    CK Tools AVIT 5 x Insulated Screwdriver Set (AV05050)
    FREE
    £14.07
  • CK Tools AVIT 5 x Insulated Screwdriver Set (AV05050)
    FREE
    £14.07
    C.K Tools AVIT 5 x Insulated Screwdriver Set
  • PPE Kit -  (Inc. Masks, 1Ltr Gel, Visor, Wipes)
    PPE Kit - (Inc. Masks, 1Ltr Gel, Visor, Wipes) (PPE-KIT-PROMO)
    FREE
    £29.00
  • PPE Kit - (Inc. Masks, 1Ltr Gel, Visor, Wipes) (PPE-KIT-PROMO)
    FREE
    £29.00
    PPE Kit -  (Inc. Masks, 1Ltr Gel, Visor, Wipes)
  • C.K. Tools T2231A Pipe Cutters (3-30mm)
    C.K. Tools T2231A Pipe Cutters (3-30mm) (T2231A)
    FREE
    £15.67
  • C.K. Tools T2231A Pipe Cutters (3-30mm) (T2231A)
    FREE
    £15.67
    C.K. Tools T2231A Pipe Cutters (3-30mm)
Advice & Support
Price Match Request
New for 2021
2 Bundle Deals Available...

*** This is a promotional offer available for a limited time only and is subject to availability or while stocks last. ***

For a limited time, the Testo 300 Flue Gas Analyser will be available with a black casing. 

The Testo 300 Smart Flue Gas Analyser with NOx Sensor is optimised for domestic boiler servicing and can be used to measure O₂, CO and NOx gases. It has been designed and tested in accordance with EN 50379, Parts 1-3.

The introduction of a new phase in the ErP directive means that it has become necessary to check the maximum nitrogen oxide (NOx) emissions for all 400kW-rated domestic and commercial heating and hot water products; the Testo 300 Smart Flue Gas Analyser with NOx Sensor provides a solution to this requirement.

Like other Testo 300 Flue Gas Analysers, this model is fitted with O₂ and CO (without H₂ compensation) sensors and can measure the following environmental parameters: 

  • O₂: 0 to 21 vol.%
  • CO: 0 to 4000ppm
  • Draught: -9.99 to +40 hPa
  • Pressure: -100 to +200 hPa
  • Temperature: -40°C to 1200°C

Similarly, with the addition of relevant probes and accessories, the Testo 300 Smart Flue Gas Analyser with NOx Sensor can measure differential temperature, gas flow pressure and ambient CO, as well as perform gas pipe testing procedures. However; this instrument also includes an integrated NO (nitric oxide) sensor with a range of 0 to 3000ppm; together with an adjustable NO₂ (nitrogen dioxide) pre-set value, this Testo 300 Smart Flue Gas Analyser can be used to calculate the total NOx (nitrogen oxide). The Testo 300 Smart Flue Gas Analyser with NOx Sensor is able to convert NOx measurements into mg/kWh values allowing the user to see how the reading relates to the maximum NOx values specified by the ErP directive:

  • 56 mg/kWh for gas- and LPG-fired boilers
  • 120 mg/kWh for oil-fired boilers

Furthermore, the Testo 300 Smart Flue Gas Analyser with NOx Sensor is equipped with a multi-functional handle facilitating the user’s ability to attach a variety of quick-change probe shafts (sold separately) to the unit. The user can measure flue gas pipes with larger diameters via the addition of a longer probe shaft; alternatively, he/she is able to check units located in awkward or difficult-to-reach places by attaching a flexible probe to the Testo 300 Smart Flue Gas Analyser with NOx Sensor.

Also adding to this unit’s practicality is its integrated, extra-strong magnets. The Testo 300 Smart Flue Gas Analyser with NOx Sensor can be attached to a magnetic surface and held in place throughout the testing procedure, thereby freeing the user’s hands.  

Additionally, the Testo 300 Smart Flue Gas Analyser with NOx Sensor has been optimised for use in challenging, rugged environments and as such features a robust, rubber protective case and a recessed, scratch-resistant screen covered by a protective film. Both the screen and protective film are replaceable, improving this instrument’s longevity.

All the necessary measurements and parameters can be viewed via the 5-inch HD display; the Testo 300 Smart Flue Gas Analyser with NOx Sensor also includes clearly structured menus allowing the user to access and view all the required measurements. It is possible to print out measurements on-site via the Testo 300 Smart Flue Gas Analyser with NOx Sensor’s Bluetooth® interface and using the supplied Testo IR/ Bluetooth Printer.

Alternatively, as the Testo 300 Smart Flue Gas Analyser with NOx Sensor features the functionality of a smartphone or tablet, readings can be used to create reports on the unit without the engineer having to leave the site. It is also possible to present professional reports to clients for signing as the Testo 300 Smart Flue Gas Analyser with NOx Sensor includes a signature function. These capabilities increase work efficiency, add to this instrument’s convenience, and decrease the amount of paperwork.

Reports can be emailed to relevant persons via a WLAN interface; it is also possible to transfer data from the Testo 300 Smart Flue Gas Analyser with NOx Sensor to an industry- or customer-specific software program. **

Alternatively, reports may be saved to the Testo 300 Smart Flue Gas Analyser’s 32GB memory. It is possible to save up to 5000 records to the Testo 300 Smart Flue Gas Analyser’s memory, as well as information pertaining to various clients, including the customer’s details, the type of boiler, site records and retest dates. The Testo 300 Smart Flue Gas Analyser with NOx Sensor will alert the user when a client’s unit is due for a retest.

Client information, data and reports may be uploaded to the user’s PC and can be organised using Testo's EasyHeat PC Analysis Software (available for free download from Testo's website); this software can also be used to configure the Testo 300 Smart Flue Gas Analyser’s settings.

The smart-touch display makes it easy to access settings, create reports and record information. The Testo 300 Smart Flue Gas Analyser with NOx Sensor has the response time of a smartphone or tablet, again adding to its ease-of-operation and improving work efficiency. For further information regarding the Testo 300 Smart Flue Gas Analyser with NOx Sensor’s smart-touch display; please see the following video.

In addition to this, when placed in Standby mode the Testo 300 Smart Flue Gas Analyser with NOx Sensor is ready to use at the touch of a button as the user no longer needs to wait for the completion of the zeroing phase.

Finally, the Testo 300 Smart Flue Gas Analyser with NOx Sensor is supplied with a rechargeable battery capable of supplying up to ten hours of power.

The Testo 300 Smart Flue Gas Analyser with NOx Sensor is a practical, rugged and comprehensive solution to servicing domestic boilers.

Testo 300 Smart Flue Gas Analyser with NOx Sensor Key Features

  • Optimised for domestic boiler servicing
  • Measure O₂, CO and NOx gases
  • Designed and tested in accordance with EN 50379, Parts 1-3
  • Provides a method by which to maintain compliance with the new ErP directive stating the maximum, permissible NOx emissions
  • Max NOx emissions apply to all 400kW-rated domestic and commercial heating and hot water products
  • O₂: 0 to 21 vol.%
  • CO (without H₂ compensation): 0 to 4000ppm
  • Draught: -9.99 to +40 hPa
  • Pressure: -100 to +200 hPa
  • Temperature: -40°C to 1200°C
  • Differential temperature measurement (OPTIONAL)
  • Gas flow pressure measurement (OPTIONAL)
  • Ambient CO measurement (OPTIONAL)
  • Gas pipe testing (OPTIONAL)
  • NO sensor: 0 to 3000ppm
  • Adjustable NO₂ pre-set value
  • Calculates the total NOx
  • Convert NOx measurements into mg/kWh values for easy comparison to the limits specified in the ErP directive
  • Multi-functional handle allowing the user to attach a variety of quick-change probes (sold separately)
  • Attach an OPTIONAL longer probe shaft to measure flue gas pipes with larger diameters
  • Attach an OPTIONAL flexible probe to check units in hard-to-reach places
  • Integrated, extra-strong magnets
  • Robust, rubber protective case
  • Recessed, scratch-resistant screen with a protective film
  • Both the screen and protective film are replaceable
  • 5-inch HD display
  • Clearly structured menus
  • Print measurements on-site via the integrated Bluetooth® interface and using the supplied Testo IR/ Bluetooth Printer
  • Features the functionality of a smartphone or tablet
  • Create reports on the unit on-site
  • Signature function: the user and client can sign reports on the analyser
  • Email reports to relevant persons via a WLAN interface
  • Transfer data to a third-party, industry- or customer-specific software program**
  • 32GB memory
  • Save up to 5000 records
  • Save customer details, boiler types, site records and re-test dates
  • Alerts the user when a client’s asset is due for re-analysis
  • Client information, data and reports can be uploaded to the user’s PC and organised using Testo's EasyHeat PC Analysis Software (download from Testo's website)
  • The Testo EasyHeat PC Analysis Software can also be used to configure the analyser’s settings
  • Smart-touch display
  • Has the response time of a smartphone or tablet
  • Standby mode: when in this mode the user does not need to wait for the completion of the zeroing phase, the analyser is ready-to-use at the push of a button
  • Supplied with a rechargeable battery capable of supplying up to ten hours of power
  • A practical, rugged and comprehensive solution to servicing domestic boilers

What’s Included?

  • Testo 300 Smart Flue Gas Analyser with NOx Sensor - Limited Black Edition
  • USB Main Unit with Cable
  • Compact Basic Flue Gas Probe (180mm, Ø6mm, Tmax. 500°C; 1.5m hose; including dirt filters and cone for fixing)
  • Carry Case
  • Testo 0554 0621 Bluetooth/ IRDA Printer
  • Testo 05540568 Spare Thermal Paper Printer - Six Rolls 

**Please Note: the manufacturer has to integrate an interface into the industry software to use the function.

*** The Testo 300 FGA with NO Sensor is a made to order item. Please note that once ordered it cannot be returned unless it is found to be faulty. ***

Part Code

Testo 300 Smart Flue Gas Analyser Technical Specifications 

Measurement Parameter Measuring Range Accuracy (±1 Digit) Resolution 
O₂ measurement 0 to 21 vol.% ±0.2 vol.% 0.1 vol.%
CO measurement (without H₂ compensation) 0 to 4,000 ppm ±20 ppm (0 to 400 ppm) 1 ppm
±5% of m.v. (401 to 2,000 ppm)
±10% of m.v. (2001 to 4,000 ppm)
CO measurement
(with H₂ compensation)
0 to 8,000 ppm ±10 ppm or ± 10 % of m.v. (0 to 200 ppm) 1 ppm
±20 ppm or ± 5 % of m.v. (201 to 2,000 ppm)
±10 % of m.v. (2,001 to 8,000 ppm)
CO measurement
(with H₂ compensation
and dilution)
0 to 30,000 ppm ±100 ppm or ± 10 % of m.v. 1 ppm
NO measurement 0 to 3,000 ppm ±5 ppm (0 to 100 ppm) 1 ppm
±5 % of m.v. (101 to 2,000 ppm)
±10 % of m.v. (2,001 to 3,000 ppm)
Efficiency testing (Eta) 0 to 120% - 0.1%
Flue gas loss 0 to 99.9% - 0.1%
CO₂ determination (digital calculation from O₂) Display range 0 to CO₂ max. ±0.2 vol.% 0.1 vol.%
Draught measurement -9.99 to +40 hPa ±0.005 hPa (0 to 0.1 hPa) 0.001 mbar (0 to 0.1 mbar)
±0.02 hPa (0.1 to +3.00 hPa) 0.001 hPa (0 to 0.1 hPa)
0.01 hPa (remaining meas.
range)
±1.5% of m.v. (+3.01 to +40 hPa)
Pressure measurement -100 to +200 hPa ±0.5 hPa (0 to +50.0 hPa) 0.01 hPa
±1 % of m.v. (+50.1 to +100.0 hPa)
±1.5 % of m.v. (+100.1 to +200 hPa)
Temperature (instrument) -40 to +1,200°C ±0.5°C (0.0 to +100.0°C) 0.1°C (-40 to +999.9°C)
±0.5% of m.v. (remaining meas. range) 1°C (remaining meas. range)
Ambient CO measurement (internal/flue gas probe) 0 to 2,000 ppm ±10 ppm (0 to 100 ppm) 1 ppm
±10% of m.v. (101 to 2,000 ppm)
Ambient CO measurement (external with CO probe) 0 to 500 ppm ±3 ppm (0 to 29 ppm) 1 ppm
±10% of m.v. (30 to 500 ppm)
General Technical Data
Certification The testo 300 is TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) EN 50379, Parts 1-3
Storage temperature -20 to +50°C
Operating temperature -5 to +45°C
Charging temperature 0 to +45°C
Humidity application range 15 to 90% RH, not condensing
Power supply Rechargeable battery, USB mains unit
Rechargeable battery life 10 hrs
Protection class IP 40
Memory 1 million measuring values
Display 5.0" touch display, HD 1280x720 pixels, IPS (160 k)
Weight Approx. 800 g
Dimensions L: 244 mm (including probe connection) H: 59 mm W: 98 mm

Files & Downloads:

0 Reviews Overall Rating

Write a Review

Write Your Own Review
You're reviewing:Testo 300 Flue Gas Analyser w/ NOx Sensor & Printer - Limited Black Edition
Your Rating

Subscribe to our Newsletter

International Enquiry