The Aim-TTi TF930 3GHz Bench/ Portable Universal Counter is a high-accuracy frequency meter. It has a 0.001Hz to 3000MHz frequency range with a high input sensitivity.
The Aim-TTi TF930 3GHz Bench/ Portable Universal Counter features a high-quality temperature-compensated internal frequency reference (TCXO). It has a low ageing rate and is stable to ±1ppm over the full temperature range.
Furthermore, the TCXO has a short warm-up time. This means accurate measurements can be determined even when the Aim-TTi TF930 3GHz Bench/ Portable Universal Counter is being used as a portable, battery-powered meter.
Moreover, when an external reference standard is connected to the Aim-TTi TF930 3GHz Bench/ Portable Universal Counter’s external reference input, it will automatically change over from the internal timebase.
The Aim-TTi TF930 3GHz Bench/ Portable Universal Counter utilises a reciprocal counting technique to provide a high-resolution at all frequencies: eight-digit readings are determined in one second, nine-digit readings are determined in ten seconds, and ten-digit readings are determined in one-hundred seconds. Ten-digit measurements have a granularity of fewer than two counts in the least significant digit.
Measurements are displayed on the Aim-TTi TF930 3GHz Bench/ Portable Universal Counter’s high-contrast, ten-digit display with a digit height of 12.5mm. The user can view measurements in Hz, kHz, MHz, ns, us, ms or s. The Aim-TTi TF930 3GHz Bench/ Portable Universal Counter also includes a comprehensive set of annunciators. Between the ten-digit display and annunciators, the user can view the input configuration and function, measurement time and status, external reference connection, and low battery indicator.
The Aim-TTi TF930 3GHz Bench/ Portable Universal Counter features two inputs optimised for use at different frequency ranges.
Input A
Input A is designed for use with frequencies in the range 0.001Hz to >125MHz. It features configurable coupling (AC or DC), input impedance (1MΩ or 50Ω), 1:1 or 5:1 attenuation, a fully variable threshold, and an active edge.
Input B
A nominal 50Ω input for use with frequencies in the range 80MHz to >3GHz.
The Aim-TTi TF930 3GHz Bench/ Portable Universal Counter includes the following measurement modes: Frequency, Period, Pulse Width, Duty Cycle, Frequency Ratio, and Event Counting (totalise).
The Aim-TTi TF930 3GHz Bench/ Portable Universal Counter’s integrated USB interface enables remote control using an RS-232 protocol via a computer’s USB port.
The Aim-TTi TF930 3GHz Bench/ Portable Universal Counter supports the remote commands of its predecessor, the Aim-TTi TF830.
To enable portability and use in remote locations, the Aim-TTi TF930 3GHz Bench/ Portable Universal Counter can be battery powered. Internal rechargeable NiMH batteries provide up to twenty-four hours of power and can be recharged within four hours using the supplied AC charger.
Alternatively, the Aim-TTi TF930 3GHz Bench/ Portable Universal Counter can be powered via the integrated USB port.
The Aim-TTi TF930 3GHz Bench/ Portable Universal Counter is a high-quality, high-accuracy, high-resolution frequency meter with a USB interface.
Get a free gift this Black! Even better, this bonus stacks with any other offer.
Free item will automatically add to your basket. Limited Stock. Offer is based on ex VAT basket total after discounts and before shipping costs. See Black Friday Offers for details.
Remember: We will not be beaten on price. Contact us if you've seen a cheaper price.