Aim-TTi TGP110 10MHz Pulse Generator with Delay
The Aim-TTi TGP110 10MHz Pulse Generator can create a variety of pulses to stimulate and control electronic systems. It features a frequency range of 0.1Hz to 10MHz, a wide pulse range, and a complement switch that inverts mark-space polarity.
Wide Pulse Range
The Aim-TTi TGP110 10MHz Pulse Generator can create pulse widths between 50ns and 5s. It features eight-decade ranges with Vernier controls.
Additionally, the Aim-TTi TGP110 10MHz Pulse Generator has a period range of 100ns to 10s which is equivalent to a repetition range of 10MHz to 0.1Hz. The delay can be independently adjusted over the same range as pulse width.
The Aim-TTi TGP110 10MHz Pulse Generator can generate pulses of a set width regardless of the repetition rate. As a result, it can provide duty cycles that extend down to 1 in 100 million.
Dedicated Pulse-Waveform Amplifier
Inclusion of a pulse-waveform amplifier facilitates the generation of flat-top pulses with fast rise and fall times at variable amplitude.
The Aim-TTi TGP110 10MHz Pulse Generator has a 50Ω output with variable amplitude ranges between 0.1V and 10V. It also supports TTL and sync outputs.
Pulse Modes
The Aim-TTi TGP110 10MHz Pulse Generator includes Normal, Squarewave, Double Pulse and Delayed Pulse modes.
Normal
One pulse is generated every period. The Normal mode ignores the delay settings.
Squarewave
0.1Hz – 10MHz squarewaves are generated at a frequency set by the period controls. In situations where the pulse width is unimportant, the Squarewave mode can be used to generate variable period edges.
When Squarewave mode is engaged the pulse width and delay settings are ignored.
Double Pulse
A second pulse is generated within every period at a set delay. The delay can be independently adjusted and is related to the leading edge of the first pulse.
Delayed Pulse
A pulse is generated after a user-programmed delay; the delay is related to the rising edge of the trigger signal.
Variable Delay
The Aim-TTi TGP110 10MHz Pulse Generator has a completely variable pulse delay: it provides a selectable delay between the sync output and pulse output.
In addition to continuous operation, the Aim-TTi TGP110 10MHz Pulse Generator can generate single or multiple pulses with precisely defined timing relationships in response to a trigger or gating signal.
The Aim-TTi TGP110 10MHz Pulse Generator features a Triggered and Gated mode, as well as a Run mode which provides normal, continuous operation. In Triggered mode, the delay is set between the trigger signal and the start of the pulse.
The Aim-TTi TGP110 10MHz Pulse Generator is a versatile instrument capable of generating an array of pulses.
Aim-TTi TGP110 10MHz Pulse Generator Key Features
- Create a variety of pulses to stimulate and control electronic systems
- Frequency range: 0.1Hz to 10MHz
- Wide pulse range: create pulse widths between 50ns and 5s
- Complement switch that inverts mark-space polarity
- Eight decade ranges with Vernier controls
- Period range: 100ns to 10s
- Generate pulses of a set width regardless of the repetition rate
- Provides duty cycles that extend down to 1 in 100 million
- Pulse-waveform amplifier generates flat-top pulses with fast rise and fall times at variable amplitudes
- 50Ω output with variable amplitude ranges between 0.1V and 10V
- Supports TTL and sync outputs
- Pulse modes: Normal, Squarewave, Double Pulse and Delayed Pulse
- Fully variable pulse delay: provides a selectable delay between the sync output and pulse output
- Generate single or multiple pulses with precisely defined timing relationships in response to trigger or gating signals
- Trigger and Gated modes
- Run mode: provides normal, continuous operation
- A versatile instrument capable of generating an array of pulses
What’s Included?
- Aim-TTi TGP110 10MHz Pulse Generator with Delay
Aim-TTi TGP110 10MHz Pulse Generator Technical Specifications
| Period, Pulse Width, Delay | ||
| Note | Each parameter is variable within 8 overlapping decade ranges with a vernier providing continuously variable control within each range. |
|
| Period | Range | 100nsec to 10sec (10MHz to 0·1Hz). |
| Jitter | <0.1%. | |
| Pulse Width | Range | 50nsec to 5sec |
| Jitter | <0.1% | |
| Delay | Range | 50nsec to 5sec |
| Trigger, Gate | ||
| Run | Normal operational mode in which pulses are generated continuously at 0.1Hz to 10MHz. |
|
| Triggered | DC to 10MHz pulse train in synchronism with external trigger pulses; pulse width determined by pulse width controls. Trigger can be generated manually from front panel button. |
|
| Gated | 0·1Hz to 10MHz pulse train, parameters set by period and pulse width controls, starts synchronously with leading edge of gate input. Last pulse is completed at the end of gating period. Gating signal can be generated manually from front panel button. |
|
| Pulse Modes | ||
| Normal Pulse | One pulse is generated each period. The delay setting is ignored. | |
| Squarewave | 0·1Hz to 10MHz squarewave, frequency set by the period controls. Pulse width and delay settings ignored. |
|
| Mark : Space ratio: 1:1 ±10%. | ||
| Double Pulse | A second pulse is generated after a delay set by the delay controls; the delay is related to the leading edge of the first pulse. |
|
| Delayed Pulse | A pulse is generated after a delay set by the delay controls; the delay is related to rising edge of the trigger signal. |
|
| Inputs | ||
| Gate/Trig Input | Frequency range | DC - 10MHz |
| Signal range | TTL threshold; max. input ±10V. | |
| Min. pulse width | >30nsec. | |
| Input Impedance | Typically 10kΩ | |
| Outputs | ||
| 50Ω Output | Amplitude | Two switch selectable ranges of 0·1V - 1·0V and 1V - 10V from 50Ω. (50mV to 500mV and 500mV to 5V into 50Ω). Adjustable within ranges by a single turn vernier |
| Rise/Fall Times | Typically 10nsec into 50Ω load. Maximum 15ns. | |
| Aberrations | Typically <5% for output set at >20% of range maximum, into 50Ω. | |
| Aux Output | Duplicates 50Ω output but at a fixed CMOS/TTL level | |
| Sync Output | Amplitude | A positive-going pulse at CMOS/TTL level. |
| Timing | Leading-edge starts >20nsec before the TTL/50 output transition. |
|
| Duration | Typically 30nsec. | |
| Complement Switch | Inverts the AUX and 50 outputs. | |
| General | ||
| Power | 230V or 115V AC nominal 50/60Hz, adjustable internally; operating range ±14% of nominal; 20VA max. | |
| Size | 140 x 220 x 230mm (HxWxD) | |
| Weight | 1.6kg (3.5lb) | |
| Operating Range | + 5°C to 40°C, 20-80% RH. | |
| Storage Range | - 40°C to 70°C | |
| Safety | Complies with EN61010-1 | |
| EMC | Complies with EN55081-1 and EN50082-1. | |
| SKU | 59120-1200 |
|---|---|
| Manufacturer Part Code | 59120-1200 |
