All Chauvin Arnoux Products

Chauvin Arnoux Metrix® DOX2000B Series Benchtop Digital Oscilloscopes

SKU
DOX2000B
Rating:
0%
(0)
As low as £390.66 £325.55
Free UK Delivery*
Price Match Guarantee & Advice

The Chauvin Arnoux Metrix® DOX2000B Series Benchtop Digital Oscilloscopes consists of three models which vary in regards to their maximum bandwidths. For further information, please see the table below.

Product Code Product Name Maximum Bandwidth 
DOX2025B Chauvin Arnoux DOX2025B Benchtop Digital Oscilloscope - 2x25Mhz 25MHz
DOX2070B Chauvin Arnoux DOX2070B Benchtop Digital Oscilloscope - 2x70Mhz 70MHz
DOX2100B Chauvin Arnoux DOX2100B Benchtop Digital Oscilloscope - 2x100Mhz 100MHz

The Chauvin Arnoux Metrix® DOX2000B Series Benchtop Digital Oscilloscopes can be used to measure, monitor and analyse electrical signals.

Each of the models in this series has a vertical sensitivity of 2mV/div to 10 V/div in 12 ranges, two channels, a 2GS/s sampling frequency and a waveform memory with a maximum capacity of 1 Mpts per channel which extends to 2 Mpts in interlaced mode.  As well as this, the Chauvin Arnoux Metrix® DOX2000B Series Benchtop Digital Oscilloscopes feature an extended memory of 2MB and an array of acquisition and analysis modes with advanced trigger functions. Each model includes 20 setups and 20 waveforms saved to the internal memory.

The Chauvin Arnoux Metrix® DOX2000B Series Benchtop Digital Oscilloscopes are capable of performing real-time analysis on two different displays and to this end include five mathematical functions:

  • Addition
  • Subtraction
  • Multiplication
  • Division
  • FFT

The user can view up to 32 simultaneous measurements on the 7-inch, panoramic, colour LCD screen with a resolution of 800 x 480 pixels. In addition to this, the comprehensive selection of timing parameters makes it possible to compare signals on two separate channels as well as zoom in on these channels if required.

Adding to the efficiency and ease-of-use of these oscilloscopes is their ability to display measurement results instantly. They include a Pass/Fail function which will compare the real-time signal to a predefined profile (MASK) in order to ascertain whether the signal has passed or failed. This result is displayed on the screen instantly.  This function is particularly well suited to monitoring the development of signals ensuring that they remain within a specified profile.

These instruments also include a Record mode which can be triggered by an output Pass/Fail test signal and will cause the oscilloscope to record signals. It has a maximum recording length of 2500 frames of 2.5 kpts.

The Roll and Recorder modes facilitate the user’s ability to monitor slow signals in real time. The Roll mode is optimised for time base ranges of > 100ms whilst the Recorder mode can be used to record these signals in real-time. It has a maximum recording memory depth of 7Mpoints.

In addition to these modes, the Chauvin Arnoux Metrix® DOX2000B Series Benchtop Digital Oscilloscopes also include an Auto-calibration mode which can be utilised to ensure the accuracy of the acquisition channels CH1 and CH2.

Adding to these products’ accuracy are their configurable digital filters which prevent high- and low- frequency noise from affecting the trigger. These models include a choice of three digital filters:

  • 2.5kHz low-pass filter: allows the user to view the fundamental while suppressing the harmonics
  • 2.5kHz high-pass filter: using this filter the user is able to view the edges and suppress low-frequency plateaux
  • 5 Hz FcB and 2.5 kHz FcH band stop filter: for reducing the harmonics

In terms of their physicality, the Chauvin Arnoux Metrix® DOX2000B Series Benchtop Digital Oscilloscopes’ screens indicate 16 horizontal divisions in full-screen mode; however, they may be customised to suit the user’s purposes. The user is able to customise the display with regards to the following aspects:

  • Select between a normal and persistent display
  • Choose either a YT or XY format
  • Adjust the display’s colours
  • Alter the graticule, brightness and contrast.

The user may also view the menu in English, French, Spanish, Italian or German.

Adding to these products’ efficiency and ease-of-use are their fast start up and shut down times (10s) and intuitive ‘soft key’ icons which allow the user to access and view desired signal types instantly.

Moreover, the Chauvin Arnoux Metrix® DOX2000B Series Benchtop Digital Oscilloscopes feature a HOST USB port which allows the user to expand the recording storage capacity. Alternatively, the operator may utilise the USB and RJ45 (Ethernet) ports to facilitate PC communication; using Chauvin Arnoux’s Easyscope Software and the oscilloscope's PC communication the user can operate the instrument; he/she may initiate tests as well as recover trace and screenshot files.

Finally, in order to improve the security of these oscilloscopes, each one includes a Kensington locking system with a security slot for a plug-in padlock ensuring that the Chauvin Arnoux Metrix® DOX2000B Series Benchtop Digital Oscilloscopes can be immobilised.

The Chauvin Arnoux Metrix® DOX2000B Series Benchtop Digital Oscilloscopes are cost-effective oscilloscopes with an eclectic array of features optimised for the comprehensive measuring and analysing of electrical signals.

Chauvin Arnoux Metrix® DOX2000B Series Benchtop Digital Oscilloscopes Key Features

  • Three models which vary in regards to their maximum bandwidths
  • Optimised for measuring, monitoring and analysing electrical signals
  • Vertical sensitivity: 2mV/div to 10V/div in 12 ranges
  • Two channels
  • Waveform memory with a maximum capacity of 1 Mpts per channel
  • Waveform memory extends to 2 Mpts in interlaced mode
  • Features an extended memory of 2MB
  • Includes an array of acquisition and analysis modes with advanced trigger functions
  • 20 setups and 20 waveforms are saved to the internal memory
  • Capable of performing real-time analysis  on two different displays
  • Includes the mathematical functions: addition, subtraction, multiplication, division and FFT
  • View up to 32 simultaneous measurements on the display
  • 7”, panoramic, colour LCD screen with an 800 x 480p resolution
  • A comprehensive selection of timing parameters allow the user to compare signals on two separate channels as well as zoom
  • Displays measurement results instantly
  • Pass/ Fail function compares the real-time signal to a pre-defined profile (MASK)
  • Instantly displays the Pass/ Fail result on the screen
  • Pass/ Fail function is particularly well suited to monitoring the development of signals according to a specified profile
  • Record mode may be triggered by a Pass/ Fail test signal
  • Record mode saves signals
  • Record mode has a maximum recording length of 2500 frames of 2.5 kpts
  • Roll and Recorder modes allow the user to monitor slow signals in real time
  • Roll mode is optimised for time-based ranges of > 100ms
  • Recorder mode can be used to record slow signals in real time
  • Recorder mode has a maximum recording depth of 7Mpoints
  • Auto-calibration mode ensures the accuracy of the CH1 and CH2 acquisition channels
  • Digital filters prevent high- and low-frequency noise from affecting the trigger
  • 2.5kHz low-pass filter: allows the user to view the fundamental while suppressing the harmonics
  • 2.5kHz high-pass filter: using this filter the user is able to view the edges and suppress low-frequency plateaux
  • 5 Hz FcB and 2.5 kHz FcH band stop filter: for reducing the harmonics
  • 16 horizontal divisions in full-screen mode
  • Select between a normal and persistent display
  • Choose either a YT or XY format
  • Adjust the display’s colours
  • Alter the graticule, brightness and contrast.
  • English, French, Spanish, Italian or German language options
  • Fast start up and shut down times – 10s
  • Intuitive ‘soft key’ icons allow the user to access and view desired signal types instantly
  • HOST USB can be used to expand the recording storage capacity
  • Utilise the USB and RJ45 (Ethernet) ports to facilitate PC communication
  • Once connected to a PC the Easyscope Software can be used to operate the oscilloscope
  • Use the Easyscope Software to initiate tests as well as recover trace and screenshot files
  • Kensington locking system with a security slot for a plug-in padlock 
  • 2GS/s sampling frequency
  • Cost-effective oscilloscopes with an eclectic array of features

What’s Included?

  • Your Choice of Chauvin Arnoux Metrix® DOX2000B Series Benchtop Digital Oscilloscopes
  • European Mains Power Cable
  • 2x Switchable Voltage Probes with 1/1 and 1/10 Ratios
  • USB A/B Cable
  • CD-ROM with PC Easyscope Software and User’s Manual
Part CodeDOX2025B

Chauvin Arnoux Metrix® DOX2000B Series Benchtop Digital Oscilloscopes Technical Specifications and Comparison

Technical Specifications DOX 2025B DOX 2070B/ DOX 2100B
Human- Machine Interface
Type of Display 7" WGA colour LCD screen (resolution 800 X 480) – Adjustment of brightness and contrast
On-screen display of curves Trace area, 8 x 16 divisions 2 curves + reference + Maths function - Full graticule or edges Display mode: Samples or Vectors with interpolation, or Persistence mode
Commands Usual direct commands by buttons/knobs on front panel System of menus on right side of the screen with selection by 5 buttons next to them – "Menus On/Off" command
Choice of language By menu, 5 languages (FR/EN/DE/IT/ES), online help in English and French
Vertical Deflection DOX 2025B DOX 2070B/ DOX 2100B
Bandwidth 25 MHz 70 MHz / 100 MHz – 20 MHz bandwidth limiter
Number of channels - Impedance 2 channels, common chassis-earths - 1 MΩ / 18 pF and External Trig channel
Display of traces Channel number, earth reference indicator and trace in the colour of the channel
Maximum input voltage ± 300 Vp-p (without probe)
Vertical sensitivity 12 ranges from 2 mV – 10 V/div - Basic accuracy ± 3 %
Rise time < 7 ns  < 5 ns (DOX 2070B) < 3.5 ns (DOX 2100B)
Factors of compensated probes 0.1 X, 0.2 X, 1 X, 10 X, 50 X, 100 X, 500 X , 1000 X, 2000 X, 5000 X, 10000 X
Horizontal Deflection DOX 2025B DOX 2070B/ DOX 2100B
Sweep speed 5.0 ns/div - 50 s/div. (Oscilloscope mode) 2.5 ns/div - 50 s/div (configurable digital filters)
Scan 100 ms/div ~ 50 s/div. (Recorder mode - Scan)
Horizontal zoom Yes
Trigger DOX 2025B DOX 2070B/ DOX 2100B
Sources / Modes CH1, CH2, Ext, Ext/5, mains / Automatic, Triggered, One-shot - XY
Roll mode 100 ms/div. to 50 s/div
Type Edge, pulse width (20 ns-10 s), video (Pal, Secam, NTSC), slope, alternate
Coupling AC, DC, HFR (HF rejection), LFR (LF rejection)
Digital Data Storage DOX 2025B DOX 2070B/ DOX 2100B
Maximum sampling rate One-shot = 250 MS/s (2 channels), 500 MS/s (1 channel) Repetitive = 10 Gé/s One-shot = 500 MS/s (2 channels), 1 GS/s (1 channel) Repetitive = 50 Gé/s
Vertical resolution 8 bits (vertical resolution 0.4 %)
Memory depth Max. depth = 32 kpoints "Unlimited"’ storage capacity (USB key) Max. depth = 2 Mpoints (long MEM) "Unlimited"’ storage capacity (USB key)
File management

Trace files (proprietary format and spreadsheet-compatible ".CSV" format) for the signals

Complete instrument setup files – Screenshot files (Windows-compatible ".BMP" format)

PEAK DETECT mode (capture of transients) Minimum event duration = 10 ns
Display modes Points or vectors – Persistence mode (1 s, 2 s, 5 s, 10 s, 20 s or infinite) or Averaging mode (factor from 4 to 256)
XY mode Yes
Other Functions DOX 2025B DOX 2070B/ DOX 2100B
AUTOSET AUTO-adjustment of the amplitude, the time base and the trigger position
MATH functions on the channels Trace calculated in real time: CH1 and CH2: addition, subtraction, multiplication, division
FFT analyser FFT calculated over 1,024 points – Simultaneous display of trace + FFT – 4 windows (rectangle, Hamming, Hanning, Blackman)
Manual measurement cursors Manual, tracking and automatic modes
PASS/FAIL Pass/Fail test using a limit envelope
Automatic measurements 32 time-based or level measurements
Filters Yes
General Specifications
Data storage and printing On USB device only
PC communication USB Device and ETHERNET RJ45 for PC communication with EASYSCOPEX software
Mains power supply Universal 100-240 V / 50/60 / 400 Hz / 50 VA max. - removable mains power cable
Safety – EMC –anti-theft Safety as per IEC 61010-1 300 V Cat II – EMC as per EN61326-1 – Kensington lock
Environment Storage: -20 °C to +60 °C – Operation: +10 °C to +40 °C
Mechanical specifications Dimensions (L x W x H): 323 x 135 x 157 mm – Weight: 2.385 kg
Warranty 2 years
0 Reviews Overall Rating

Write a Review

Write Your Own Review
You're reviewing:Chauvin Arnoux Metrix® DOX2000B Series Benchtop Digital Oscilloscopes
Your Rating

Subscribe to our Newsletter

International Order Form