Choose a free accessory with a multifunction tester.Shop Now
Note: this clamp cannot be used without a compatible digital multimeter.
Small, compact current clamp adaptor ideal for measuring AC current using your existing digital multimeter.
The MINI 03 can be used with most industry-standard digital multimeters which accept 4mm banana jacks. Once attached, it can be used to measure AC current up to 100A with measurement range from 1A to 100A.
This clamp is suitable for conductors (cables) with maximum diameter of 10mm.
|Measurement Range||1A to 100A|
|Accuracy of Primary Current (in %)||≤2% + 50mA|
|Phase Shift||Not specified|
|Output Signal||1mV AC / A AC (100mV for 100A)|
|Maximum Current||<150A permanent from 48 to 500Hz|
|Influence of Temperature||≤0.2% per 10°K
|Influence of Adjacent Conductor||≤2mA/A at 50Hz
|Influence of Conductor Position in Jaws||≤0.1% at 50/60Hz
|Influence of Frequency||≤1% from 65 to 500Hz
|Operating Temperature||-10 to 50°C|
|Storage Temperature||-40 to 80°C|
|Relative Humidity||0 to 85% RH with linear decrease above 35°C|
|Operating Altitude||0 to 2000m|
|Casing Protection Rating||IP40 (EN 60529 Ed. 1992)|
|Drop Test||1.5m (IEC 68-2-32)|
|Shock Resistance||100g / 6ms / half-period (IEC 68-2-27)|
|Vibration Resistance||5-15Hz (1.5mm), 15-25Hz (1mm), 25-55Hz (0.25mm) (IEC 68-2-6)|
|Self-Extinguishing Capability||Casing UL94 V2|
|Dimensions||130 x 37 x 25mm|
We'd really appreciate it if you'd review this product
Why not leave a review of this product? Reviews help us improve our service for customers looking for a product to make a decision.No reviews have been found
Do you have a question or found it cheaper? Contact us