All Chauvin Arnoux Products

Chauvin Arnoux PEL102 Power & Energy Logger

SKU
P01157152
Rating:
0%
(0)
£1,114.80 £929.00
Was £1,315.20 £1,096.00
You Save £200.40 £167.00
Free UK Delivery*
Price Match Guarantee & Advice

Insert this datalogger directly into an existing electrical system to constantly monitor various factors over a time period.

Suitable for use with single phase, three phase. split phase and other specific types of network, the PEL102 integrates directly onto a wall, can be held in the hands or is fully magnetised for direct insertion into closed cabinets.

Once attached to the system the PEL102 can be used to measure voltage from 10 to 1000V AC/DC, current across a wide range, voltage and current ratio, power from 10W to 10GW, energy, phase and harmonics up to the 50th order.

The sampling rate of the PEL102 can be adjusted as is needed and data is directly stored onto an included SD card. This information can then be sent over to a PC or tablet and interacted with further to spot trends, dips and other power quality factors over the measurement period.

Chauvin Arnoux PEL102 Power & Energy Logger Key Features

  • Transportable - designed for integration into any network type
  • Installs without switching off the electrical network
  • Data recording on SD card and direct download to PC via ethernet, USB and Bluetooth
  • Compact, magnetised design allows the instrument to be installed in closed cabinets
  • CAT III 1000V
  • 3 voltage and 3 current inputs
  • Voltage measurements
  • Current measurements
  • Voltage ratio/current ratio calculations
  • Power calculations
  • Energy calculations
  • Phase calculations
  • Harmonics up to the 50th order
  • MIN/MAX measurements
  • Adjustable sampling rate

Full List of Products Included

  • Chauvin Arnoux PEL102 Power & Energy Logger
  • 4 x Measurement Leads
  • 4 x Crocodile Clips (Black)
  • 2GB SD Card
  • Set of Rings and Inserts
  • Mains Cable
  • USB Cable
  • Multifix Mounting Systems
  • Operating Manual
  • Safety Datasheet
  • PEL PC Transfer Software
  • Quick Start-Up Guide
  • SD MN Adapter
Accessories related to this product:
  1. Chauvin Arnoux MA193 Clamp For Qualistar Power Analysers
    £168.30 £140.25
  2. Chauvin Arnoux E3N Clamp ACDC
    £324.36 £270.30
Part CodeP01157152

Chauvin Arnoux PEL Series Technical Specifications

ModelPEL102PEL103
Display None Triple digital
Installation Types Single-phase, split-phase, three-phase with or without neutral and many other specific configurations
Number of Channels 3 voltage inputs
3 current inputs (calculation of neutral current)
Measurements
Network Frequency 50Hz, 60Hz and 400Hz
Voltage (Measurement Range/Best Accuracy) 10.00 to 1000V AC/DC (±0.2%+0.5V)
Current (Depending On Sensor) 5mA AC to 10kA AC / 50mA to 1.4kA DC (±0.5%
Calculated Measurements
Ratio Up to 650,000V / up to 25,000A
Power 10W to 10GW / 10var to 10Gvar / 10VA to 10GVA
Energy Up to 4EWh / 4Evarh / 4 EVAh (E=10 to the power of 18)
Phase Cos φ, tan Φ, PF
Harmonics Up to the 50th order
Other Functions
Phase Order Yes
MIN/MAX Yes
Mounting Magnet/hook
Recording
Sampling Rate/Acquisition Rate/Aggregation 128 s/period - 1 measurement per second - from 1 min to 60 mins
Memory SD card 2GB (SD-HC up to 32GB)
Communication Ethernet, Bluetooth and USB
Power Supply 110V to 250V (+10%, -15%) at 50/60Hz and 400Hz
Safety IEC 61010 600V CAT IV - 1000V CAT III
Mechanical Specifications
Dimensions 256 x 125 x 37mm without sensor
Weight 900g 950g
Casing IP54, UL (pending)
0 Reviews Overall Rating

Write a Review

Write Your Own Review
You're reviewing:Chauvin Arnoux PEL102 Power & Energy Logger
Your Rating

Subscribe to our Newsletter

International Order Form