Measure pressure accurately with this Comark pressure meter.
Handheld, portable and suitable for use in countless pressure environments, the Comark 9553 features the ability to measure pressure across PSI, mBar, inH20, inHg, mmHg, torr, KPa and mmH20 measurement units with average range of 0 to ±350mBar (varies dependant on measurement unit used).
Featuring dual inputs for both positive and negative (vacuum) pressure measurements, the Comark 9553 can be used for both gauge and differential pressure measurements.
This instrument is available either as a normal tester or can optionally be supplied with silicone protection, making the 9553 suitable for liquid pressure measurements.
Comark 9553 Pressure Meter Key Features
- 0 to ±350mBar range
- Measure pressure in PSI, mBar, inH20, inHg, mmHg, torr, KPa and mmH20
- Positive and negative ports
- Positive or negative (vacuum) pressure measurements
- Clear LCD display
- Adjustable zero value
- Maximum/minimum pressure and hold function
- Average reading function
- Overrange indication – shows maximum over/under pressure 15PSI/1000mBar
- Low battery indication
- Long battery life: up to 125 hours of continuous use
- Supplied with a 9V PP3 6F22 battery
- Over 9999 reading indication warning
- Filter key: filters out transient readings and calculates the average readings from measurements taken over the preceding four seconds
- Zero key
- Hold key
- Record key
- Selectable auto switch off
- Twin inputs
- Durable housing: dust and waterproof to IP67, BS:EN60529, IEC529
- Protective rubber boot
- Supplied with 4x 1/8" BSP nylon washers, 1.4m polyurethane tube SP blue, 2x male stud coupling with washer
- Suitable for use as a calibrator (requires Comark TK2 pressure test kit – sold separately)
What’s Included?
- Comark C9553 Pressure Meter
- 4x 1/8" BSP Nylon Washers
- 1.4m Polyurethane Tube SP Blue
- 2x Male Stud Coupling with Washer
- 9V PP3 6F22 Battery
Comark C9553 Technical Specifications
Pressure Measurement Range | 0 to ±350 mBar |
Resolution | 0.1mBar |
Accuracy | ±0.2% of full scale (FS) at +23°C |
Repeatability | ±0.1% of full scale (FS) at +23°C |
Mean Temperature Coefficient of Reading | <0.1% per °C |
Operating Temperature Range | 0 to 50°C |
Humidity Range | 10 to 90% RH non-condensing |
EMC | Tested to EN61326-1 Criteria B performance |
Environmental Protection | IP67, BS:EN60529, IEC529 |
Battery | *9V PP3 6F22 — MN1604 UCAR9V |
125 hours (using MN1604) | |
*Non-IS Models Only. IS models must only use Zinc Chloride Battery | |
Low Battery Warning | Displays BAT just before end point of battery |
Over Pressure Indication | – – – – |
Over 9999 Reading Indication | Lowest 4 digits blink |
Connections | 1/8" BSP female |
Dimensions | 175 x 82 x 32mm |
Weight | 330gm including battery |
Warranty | 2 Years |
SKU | C9553-SIL |
---|---|
Manufacturer Part Code | C9553 |