All Comark Products

Comark C9503 ATEX Intrinsically Safe Pressure Meter - 0 to ±350mBar

SKU
C9503/IS
Rating:
0%
(0)
Reward Points
:
359
£430.80 £359.00
Only 1 in Stock Free UK Delivery*
Advice & Support
Price Match Request
Comark C9503 ATEX Intrinsically Safe Pressure Meter

This meter has been designed with Ex II 1 G EEx ia IIC T4 Baseefa 03 ATEX 0079 certification. Please check that the environment you’re working with is suitable for this meter.

Fully intrinsically safe pressure measurements are easily obtained using Comark’s C9503, a comprehensive pressure meter designed not to cause an ignition in a potentially combustible environment.

Part of the C9500 range, the C9503 features the ability to calculate pressure from 0 to ±350mBar across selectable pressure units of PSI, mBar, inH20, inHg, mmHg, torr, Kpa and mmH20. Both positive and negative (vacuum) pressure measurements can be carried out.

Comark C9503 ATEX Intrinsically Safe Pressure Meter Key Features

  • Certified for use in environments with combustible atmospheres in line with Ex II 1 G EEx ia IIC T4 Baseefa 03 ATEX 0079 certification (certification applicable at atmospheric pressure)
  • Impregnated protection: limits electrical discharge and surface discharge to prevent ignition of volatile gases, dust or vapours
  • Pressure range: 0 to ±350mbar
  • Selectable pressure units: PSI, mBar, inH20, inHg, mmHg, torr, KPa and mmH20
  • Twin inputs for gauge or differential pressure measurements 
  • Positive and negative ports for positive or negative (vacuum) pressure measurements
  • Adjustable zero values
  • Max, min and data hold functions
  • Average reading function
  • Filter mode removes transients readings and takes the average reading over the past four seconds
  • Record function 
  • Overrange indicators – maximum over/under pressure 15PSI/1000mBar
  • Indicates when measurements are in excess of 9999
  • Selectable auto switch-off function
  • Low battery indicator
  • Supplied with a 9V PP3 6F22 battery 
  • Long battery life: up to 125 hours of continuous use
  • Supplied with 4 x 1/8" BSP nylon washers, 1.4m polyurethane tube and 2x male stud coupling with washer
  • Ultra-tough housing: dust and waterproof to IP67
  • Functions as a calibrator (requires Comark TK2 pressure test kit)

What’s Included?

  • Comark C9503 ATEX Intrinsically Safe Pressure Meter
  • Tubing
  • Connectors

Comark C9503 ATEX Intrinsically Safe Pressure Meter Technical Specifications 

Pressure Measurement Range 0 to ±350 mBar
Resolution 0.1mBar
Accuracy ±0.2% of full scale (FS) at +23°C
Repeatability ±0.1% of full scale (FS) at +23°C
Mean Temperature Coefficient of Reading <0.1% per °C
Operating Temperature Range 0 to 50°C
Humidity Range 10 to 90% RH non-condensing
EMC Tested to EN61326-1 Criteria B performance
Environmental Protection IP67, BS:EN60529, IEC529
Battery 9V PP3 *6F22 — 6F22REL or GP1604G
125 hours
*IS models must only use Zinc Chloride Battery
Low Battery Warning Displays BAT just before end point of battery
Over Pressure Indication – – – –
Over 9999 Reading Indication Lowest 4 digits blink
Connections 1/8" BSP female
Dimensions 175 x 82 x 32mm
Weight 330gm including battery
0 Reviews Overall Rating
Write a Review
Write Your Own Review
You're reviewing:Comark C9503 ATEX Intrinsically Safe Pressure Meter - 0 to ±350mBar
Your Rating
Additional Information
SKU C9503/IS
Manufacturer Part Code 3059258
International Enquiry