Call 01642 931329 for Orders & Advice

Crowcon Gas Pro IR with PID Personal Four Gas Detector – Pumped

Crowcon Gas Pro IR with PID Personal Four Gas Detector – Pumped
sku: CCGASPRO4-IR-PID-P
MPN: GPP-0311-EA-A

Free UK Delivery On Orders Over £40
  • Completely customisable four gas detector with IR and PID sensors and internal pump
  • Intrinsically safe with an audible, visual and vibration alarm for hazardous gas levels
  • Internal pump helps to make pre-entry testing easier and means the detector can be used in pumped and diffused modes 

Was: £1,764.00
You Save: £82.80
£1,681.20 Incl. VAT £2,017.44
Was: £1,764.00
You Save: £82.80
£1,681.20 Incl. VAT £2,017.44
Members earn 3362 points

Do you have a question or found it cheaper? Contact us

Description

Crowcon Gas Pro IR with PID Personal Four Gas Detector – Pumped Details

The Crowcon Gas Pro IR with PID Personal Four Gas Detector – Pumped is available as standard in the six options listed in the drop-down selection. The six standard models can each detect a total of four gases using a combination of the built-in gas specific, IR and PID sensors. The six standard instruments are:

  • GPP-0304-EA-A: Sulphur Dioxide (SO2), Oxygen (O2), Flammable Gases** detected via IR sensor and Methane (CH4) detected via the PID sensor
  • GPP-0307-EA-A: Ammonia (NH3), Oxygen (O2), Flammable Gases detected via IR sensor and Methane (CH4) detected via the PID sensor
  • GPP-0309-EA-A: Nitric Dioxide (NO2), Oxygen (O2), Flammable Gases detected via IR sensor and Methane (CH4) detected via the PID sensor
  • GPP-0311-EA-A: Carbon Monoxide (CO: 0-500ppm), Oxygen (O2), Flammable Gases detected via IR sensor and Methane (CH4) detected via the PID sensor
  • GPP-0312-EA-A:  Carbon Monoxide (CO: H2 filter 0-2000ppm), Oxygen (O2), Flammable Gases detected via IR sensor and Methane (CH4) detected via the PID sensor
  • GPP-0313-EA-A: Hydrogen Sulphide (H2S), Oxygen (O2), Flammable Gases detected via IR sensor and Methane (CH4) detected via the PID sensor

(** Flammable Gases include: carbon dioxide, methane, pentane and propane)

The Crowcon Gas Pro IR with PID Personal Four Gas Detector - Pumped is completely customisable; the above options are the most common configurations, however other sensors are available, please see the Technical Specifications for more details. Should you require a configuration not listed above, please contact our sales team for more information or to place your order.  

Further to this, the above models are set to English ATEX as standard, for different regions/ alarm levels please contact our sales team before purchase.

See the table below for further details regarding the regions and approvals available.

Region/ Approval  Description
EA English ATEX
NU American UL
SA Spanish ATEX
GA German ATEX
DA Dutch ATEX
IA Italian ATEX
FA French ATEX
BI Brazilian Portuguese INMETRO
PA Polish ATEX

Crowcon Gas Pro IR with PID Personal Four Gas Detector – Pumped Description

The Crowcon Gas Pro IR with PID Personal Four Gas Detector – Pumped is a rugged, water and dust resistant (IP65 and IP67) gas monitor, ideal for use in industries such as:

  • Gas
  • Oil
  • Aviation
  • Pharmaceutical
  • Plastic Production  

This product's large scope for use is due to the Crowcon Gas Pro IR with PID Detector’s combination of integrated gas specific sensors, IR sensor for flammable gases, and PID sensor for volatile organic compounds.

This product’s PID sensor ensures that this gas monitor can effectively detect volatile organic compounds. These compounds are often found in solvents, paint thinners and glues; as these compounds are also prone to evaporate at room temperature, they are also often found in gasoline, diesel, heating oil, kerosene and jet fuel vapours. The widespread prevalence of volatile organic compounds means that quite often workers are exposed to toxic levels of these gases before a regular combustible gas indicator is able to register a concentration significant enough to trigger any alarms. However, the Gas Pro with PID sensor works to improve user safety by utilising UV light to measure the ionisation potential and subsequent toxicity of the gases present in a work site. This facilitates quicker detection of hazardous gas levels. For further information regarding the technology used in the PID sensor, please consult the video below.      

This Crowcon Gas Pro detector’s IR sensor also makes it ideal for detecting CO2 and flammable gases, such as methane, pentane and propane. This sensor will ensure that the user remains safe even within areas of low oxygen concentration (less than 5% of the local atmosphere), such as in storage tanks purged with inert gas or in confined spaces, as unlike a pellistor gas sensor it does not require oxygen to function. This combined with its resistance to silicon poisoning makes the IR sensor safer and more cost-effective than pellistor sensors as it remains highly responsive and sensitive to flammable gases for longer, reducing the frequency with which the sensor will need to be replaced. In order to attain and retain this high level of sensitivity the IR sensor measures wavelengths which absorb gas, in addition to measuring wavelengths which do not absorb gas. The above PID sensor combined with the IR sensor make this Crowcon Gas Pro Detector particularly suited for use in the gas and oil industries.

Given that the gas and oil industries usually involve noisy work sites, the Gas Pro IR with PID Personal Four Gas Detector will not only issue an audible 95db warning when dangerous gas levels are detected, but will also vibrate and activate the red and blue LED lights around the instrument.

Furthermore, the Crowcon Gas Pro’s design, featuring a top mount display, ensures that the user can continually view gas level readings throughout his/her shift, even when this compact and lightweight gas detector is clipped to the user’s clothes. Its battery, with a life of up to fourteen hours, also adds to this product’s practicality through ensuring that this gas detector remains functional throughout the user’s shift.

The Crowcon Gas Pro IR with PID Personal Four Gas Detector puts user safety and ease-of-operation at the forefront of its design. To this end each Crowcon Gas Pro Detector is built to be intrinsically safe and is compliant with the following approvals:

  • IECEx: Ex d ia IIC T4 Gb Tamb -20°C to +55°C
  • ATEX: II 2 G Ex d ia IIC T4 Gb Tamb -20°C to +55°C
  • UL: Gas detector use in hazardous locations Class 1, Division 1, Groups A, B, C, and D only as to intrinsic safety
  • INMETRO: Ex d ia IIC T4 Gb Tamb -20°C to +55°C
  • Marine Equipment Directive: MED 1500009/M1

In addition to this, each gas detector features a single button operation system and intrinsic functionality ensuring that this product is easy-to-use and can be operated by users of various experiences.

Finally, the Crowcon Gas Pro IR with PID Personal Four Gas Detector – Pumped improves the user’s ease-of-operation by including an internal pump activated by the flow plate, making pre-entry testing easier and allowing the user to tailor this product to his/her needs, as this pump enables the user to wear this gas protector in either pumped or diffused modes.

For further information regarding fitting the flow plate and how to perform a pre-entry check please consult the videos below.

 The Crowcon Gas Pro IR with PID Personal Four Gas Detector – Pumped is an easy-to-use, versatile product, ideal for helping to protect users against dangerous gases and gas concentrations.

Crowcon Gas Pro IR with PID Personal Four Gas Detector – Pumped Key Features

  • Customisable four gas detector with IR and PID sensors and includes an internal pump
  • Available in a variety of region/ alarm level standards
  • Rugged, water and dust resistant (IP65 and IP67) casing
  • PID sensor detects volatile organic compounds
  • Uses UV light to measure ionisation potential of gas molecules and the subsequent level of gaseous volatile organic compounds
  • IR sensor measures CO2 and flammable gases such as methane, pentane and propane
  • IR functions even in places with low oxygen concentrations (less than 5% of the local atmosphere)
  • IR sensor is resistant to silicon poisoning
  • IR sensor measures wavelengths which absorb gases and wavelengths which don’t absorb gases
  • IR sensor is more cost-effective than pellistor sensors
  • IR sensor improves user safety as it remains more sensitive for longer
  • Hazardous gas levels trigger audible 95db alarm
  • Hazardous gas levels trigger visual alarm: red and blue LED lights around the instrument
  • Hazardous gas levels trigger vibration alarm
  • Top mount display for easy viewing of gas level readings
  • Compact
  • Lightweight
  • Can be clipped onto user’s clothing
  • Battery with up to fourteen hours of power
  • Single button operation
  • Intrinsically functional
  • Internal pump activated by flow plate for easy pre-entry testing
  • Can be worn in pumped or diffused modes
  • Ideal for use in gas, oil, aviation, pharmaceutical, as well as plastic production industries
  • Intrinsically safe:  IECEx: Ex d ia IIC T4 Gb Tamb -20°C to +55°C; ATEX: II 2 G Ex d ia IIC T4 Gb Tamb -20°C to +55°C; UL: Gas detector use in hazardous locations Class 1, Division 1, Groups A, B, C, and D only as to intrinsic safety; INMETRO: Ex d ia IIC T4 Gb Tamb -20°C to +55°C; Marine Equipment Directive: MED 1500009/M1

What’s Included?

  • Your Choice of Crowcon Gas Pro IR with PID Personal Four Gas Detector – Pumped 

Optional Accessories

The Crowcon Gas-Pro IR with PID Personal Four Gas Detector - Pumped can be purchased with a number of different accessories. Before making your purchase please contact our sales team to add any of the following products to your order.

Product Code Description 
Gas Pro Sampling Options
AC0201 1m standard tubing (includes tube insert) (other lengths also available)
AC0301 1m tubing for reactive gases (includes tube insert)
SS0726 Exhaust bellows (on outlet for pumped sampling, calibration/gas testing)
AC0103 Calibration flow plate for PC Calibration (no magnet)
M04038 Gas-Pro flow plate individual gasing
S013055 Gas-Pro dust filter flow plate
Gas-Pro Charging Options 
CH0100 Multi-region power lead (includes CH0101 & CH0102)
CH0101 Multi-region power supply
CH0102 Charging lead
CH0103 USB communications lead (not powered)
CH0104    USB dual communication and power lead
CH0105 Gas-Pro charger cradle (no power)
CH0106 Vehicle charging adaptor
For use with CH0102 charging lead
CH0107 5 Way multi-region power supply (use with 5 x CH0102)
Inmerto Certified 
CH0200 Multi-region power lead (includes CH0101 and CH0202) - Inmetro
CH0202 Charging lead - Inmetro
CH0203 USB communications lead (not powered) - Inmetro
CH0204 USB communication and power lead - Inmetro
Gas Pro Accessories 
AC0500 Tube insert (connection from tube to flow plate) x10
AC0511 Elbow tube insert x 10
AC0502 Water trap
AC0504 Hand aspirator bulb
AC0506   Chest harness plate
AC0507 Chest harness straps (2 per pack)
AC0508 Single strap
AC0509 Drop line 6m (includes D-ring clip)
AC0512 Ball float probe (select tubing length separately)
Technical Specs

Part Code: GPP-0311-EA-A

Crowcon Gas Pro IR with PID Personal Four Gas Detector – Pumped Technical Specifications

Size 43 x 130 x 84mm (1.7 x 5.1 x 3.3ins)
Weight  309g 4 gas (10.8oz)/ 340g pumped (11.9oz)333g 5 gas (11.7oz)/ 362g pumped (12.7oz)
Alarms Audible >95dB @ 30cm (98dB @30cm in loud mode)
Visual - all angle dual red/blue LEDs
Vibrating alert
Display Top mount for ease of view with dual colour backlight (green/red)
Data Logging  125hr at 10-second intervals (45,000 logs)
Event Logging Alarm, over range, calibration, bump, on/off, TWA, 1000 events
Battery Rechargeable Li-ion, >14hr (13 hours pumped operation) based on CH4, O2, H2S, CO
Typical charge time 7.5hr
Sampling Internal pump as option
Operating Temperature -20°C to +55°C (-4°F to +131°F)
Storage -25°C to +65°C (-13°F to +149°F)
Humidity 10 to 95% RH+
Ingress Protection Independently tested to IP65 and IP67
Approvals IECEx: Ex d ia IIC T4 Gb Tamb -20°C to +55°C
ATEX: II 2 G Ex d ia IIC T4 Gb Tamb -20°C to +55°C
UL: Gas detector use in hazardous locations Class 1, Division 1, Groups A, B, C, and D only as to intrinsic safety
INMETRO
Compliance FCC and CE. Complies with EMC Directive 2014/30/EU, EN50270 and ICES-003
Interface Data connection for gas test solutions and direct to PC
Charging Direct connection to multi-regional power supply
Vehicle charger adaptor
Desktop cradle
USB power and communications lead

Gases and Ranges

Gas Range Typical Alarms Resolution
Ammonia (NH3) 0-100ppm 25ppm 1ppm
Carbon dioxide (CO2) 0-5% vol. 0-5% vol. 0.01% vol.
Carbon monoxide (CO) 0-2000ppm 30ppm 1ppm
Carbon monoxide (CO) 0-500ppm 30ppm 1ppm
Carbon monoxide 
(hydrogen filtered)
0-2000ppm  30ppm 1ppm
Chlorine (Cl2) 0 - 5ppm  0.5ppm 0.1ppm
Dual toxic (CO-H2S) H2S 0-100ppm  
CO 0-500ppm
 5ppm
 30ppm
1ppm
 1ppm
Flammable  0-100% LEL 20% LEL 1% LEL
Hydrogen sulphide (H2S) 0-100ppm 5ppm 1ppm
Nitrogen dioxide (NO2) 0-20ppm  1ppm 0.5ppm
Oxygen (O2) 0-25% vol. 19% / 23% vol.  0.1% vol.
Ozone (O3)  0-1ppm 0.1ppm 0.01ppm
Sulphur dioxide (SO2) 0-20ppm 1ppm 0.1ppm
Chlorine dioxide (ClO2) 0-1ppm 0.1ppm 0.1ppm
Nitric oxide (NO)  0-100ppm 25ppm 1ppm

Reviews

We'd really appreciate it if you'd review this product

Why not leave a review of this product? Reviews help us improve our service for customers looking for a product to make a decision.

No reviews have been found

Write Your Own Review

How do you rate this product? Required *

 
1
2
3
4
5
Value
Quality
Price