Fluke 705 Loop Calibrator
* Buy a Fluke (Worth £150+ Ex VAT) and Choose a Free Fluke!
Available until 31/08/24. For more details and to see your choice of free Fluke tool - View Offer
Only available from authorised Fluke distributors, such as PASS Ltd. Terms and conditions apply.
Reliable measurements you can rely on without breaking the bank - this is Fluke's 705, a small-size, cost-effective and easy-to-use loop calibrator suitable for mA sourcing, simulation and measurement.
Highly accurate (0.02% accuracy) with resolution down to 0.001mA, the Fluke 705 loop calibrator can simultaneously display mA and % of span on the display, includes selectable step or ramp outputs and includes a 24V loop supply with mA measurements, allowing you to power and read a transmitter at the same time, all without relying on a separate digital multimeter.
You can use the Fluke 705 to measure voltage from 0 to 28V with resolution of 1mV, measure current from 0 to 24mA with resolution of 0.001mA and you can also source current across ranges from 0 to 20mA or 4mA to 20mA. Source and measurement modes must be used separately from each other - both cannot be used simultaneously.
Fluke 705 Loop Calibrator Key Features
- Cost-effective, powerful loop calibrator
- mA sourcing, simulation and measurement
- Large-size display with simple pushbutton interface
- Simultaneous mA and % readout
- mA accuracy of 0.02%
- Push button 25% steps for fast, easy linearity checks
- Span check - ideal for fast confirmation of zero and span
- Choose between slow ramp, fast ramp and step for smooth outputs for valve slewing or functional loop testing
- Internal 24V loop supply - power and read a transmitter at the same time, with no need to use a separate digital multimeter
- 0-20mA or 4-20mA default startup modes
- 0-28V DC measurements for checking loop voltage
- Compact case with separate protective holster
- Includes 3 year warranty from Fluke
What's Included?
- Fluke 705 Loop Calibrator
- AC70A Alligator Clips
- C10 Protective Yellow Holster with FlexStand
- Instruction Sheet
- TL75 Safety-Designed Test Lead Set
- NIST-Traceable Calibration Report and Data
Need a Carrying Case?
Want a case for your calibrator? Fluke recommends the following cases for this instrument (part numbers in bold):
- C100 - Hard Meter and Accessory Case
- C12A - Soft Meter Case
- C195 - Soft Case
- C800 - Hard Meter and Accessory Case
- C25 - Large Soft Case
- CAMO-C25 - Carrying Case with Camo Colour
Fluke 705 Technical Specifications
| Voltage Measurements | |
|---|---|
| Range | 0 to 28V |
| Resolution | 1mV |
| Accuracy | 0.025% Rdg + 1 counts |
| Current Measurements | |
| Range | 0mA to 24mA |
| Resolution | 0.001mA |
| Accuracy | 0.02% Rdg + 2 counts |
| Current Sourcing | |
| Range | 0mA to 20mA or 4mA to 20mA |
| Accuracy | 0.02% Rdg + 2 counts |
| Drive Capability | 1000Ω @ 24mA |
| Loop Power While Measuring mA | 24V |
| Display Current and % of span | Yes |
| Auto Step, Auto Ramp | Yes |
| Span Check | Yes |
| Battery Life | 18 hours typical, at 12mA |
| General Specifications | |
| Maximum Voltage | 30V |
| Operating Temperature | -10 to 55°C |
| Non-Operating Temperature | -4 to 60°C |
| Relative Humidity | 95% (10 to 30°C) 75% (30 to 40°C) 45% (40 to 50°C) 35% (50 to 55°C) |
| Operating Altitude | 3000m max |
| Shock | 1m drop test |
| Vibration | Random, 2g, 5Hz to 500Hz |
| Safety | CSA C22.2 No. 1010.1: 1992 |
| EMC | EN50082-1: 1992 and EN55022: 1994 Class B |
| Power | 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline |
| Warranty | 3 years |
| SKU | Fluke 705 |
|---|---|
| Manufacturer Part Code | 665091 |
| Country of Origin | China |
