Description
The Kewtech KEWEVA is a single-dial operation EV charge point adapter with no cable. The adapter plugs straight into the charging unit without an awkward cable to negotiate when testing. A single rotary dial with ready and charging states (no extra and often unnecessary features) makes it the simplest EVSE adapter on the market. The adapter is supplied with a durable carry case.
Key Features
- CP Error auto-check for faster testing
- Direct low-resistance connections for highly accurate results
- Suitable for single & three-phase charging equipment
- Uses standard 4 mm connectors rated at 10 A for testing purposes
- Red LEDs indicate the live status per phase
- Works with any MFT with EV charging point testing capabilities
- Incorporates an IEC 62196-2 type 2 connector for EV charging units
- Single rotary dial controls the CP status simulation: standby, ready & charging
- Checks the charging station's PWM signal is at 1 Khz, confirmed by a blue LED
- Separate RED LED indicates when voltage is applied to output connectors
- Supplied with durable carry case
For commissioning the KEWEVA is the adapter for you or for troubleshooting have a look at the KEWEVSE adapter.
Tech Specs
Input Voltage | Max 250 V (single-phase) Max 430 V (three-phase) 50/60Hz |
---|---|
Measurement Category | BSEN 61010 CAT II 300V |
Current Carrying | Max 10 A for intermittent testing purposes only |
CP States Simulation | A, B, C |
EV Charger Connection Type | IEC62196-2 Type 2 male |
Working Temperature | 0 - 40° C |
Storage Temperature | -10 - 50° C |
Humidity | 0 - 80% RH |
0 Reviews
Overall Rating
Additional Information
SKU | KEWEVA |
---|---|
Manufacturer Part Code | KEWEVA |