Metrel MI2892 PowerMaster Power Quality Analyser - Choice of Sets
The Metrel MI2892 PowerMaster Power Quality Analyser is available in three sets: Standard, Euro and Advanced. These sets vary in regards to their included flexible clamps; please see the 'What's Included?' section for further information.
Powerful, easy-to-use and packed full of features, the Metrel MI2892 is a portable, handheld and intuitive power analyser that's perfect for any power quality application.
A three-phase power analyser, the Metrel MI2892 integrates directly into your installation to find problems with power quality. It can detect voltage, current, power, unbalance, flicker, harmonics, interharmonics, energy, inrush current, waveform, temperature and much more, giving users the ability to spot everything from voltage dips and swells to voltage unbalance and harmonic distortion.
Featuring a unique, graphical full-colour screen, choosing between different measurements and configuring the MI2892 is as simple as possible. It also features automatic clamp recognition with four channels for voltage and current, has 7 adjustable alarms, records transients and comes as standard with an SD card that allows data to be documented directly on the instrument.
The Metrel MI2892 PowerMaster Power Quality Analyser's extensive memory, which can be expanded to 32GB, makes it suitable for long-term recording applications, as well as troubleshooting applications; its Quick Set buttons are particularly well-suited for troubleshooting as they enable faster data overview and ensure the MI2892 is user-friendly. The Metrel MI2892 PowerMaster Power Quality Analyser can be used to conduct measurements on single- and three-phase power distribution systems.
The instrument is also supplied as standard with Metrel's software to allow interaction using a PC, enabling the user to download and analyse data saved to the Metrel MI2892 PowerMaster Power Quality Analyser, as well as create reports using this information.
Metrel MI2892 PowerMaster Power Quality Analyser Key Features
- Ideal for power quality assessment and troubleshooting in low and middle voltage electrical systems
- Suitable for long term analysis
- Voltage measurements with true RMS, peak and crest factor (4 channel)
- The four voltage channels have a wide measurement range: 0 to 1000Vrms (CAT III/ 1000V)
- Current measurements with true RMS, peak and crest factor (4 channel)
- The four current channels support automatic clamp recognition and 'on instrument' range selection
- Measure active, reactive and apparent power
- Power measurements in compliance with IEEE 1459
- VFD (Variable Frequency Drives)
- Measure unbalance and flicker
- Harmonic and interharmonic analysis up to the 50th (plus total harmonic distortion measurements)
- Measure active, reactive, generated and consumed energy
- Capture and record power supply events such as shutdown, interruptions, swells and dips
- Inrush currents monitoring and recording
- Waveform/inrush display with snapshot and recording
- Transient recording (sampling frequency 49k samples/ sec)
- Power quality analysis according to EN 50160, IEEE 519 (including signalling and interharmonics)
- Compliance with power quality standard IEC 61000-4-30 Class A
- Record up to 7 user-configurable alarms
- Temperature measurements
- Calculate power factor (cos)
- Automatic Smart Clamp detection and Smart Clamp range selection
- Supplied with 8GB SD card but can accept SD cards of up to 32GB
- Colour-coded input terminals and terminal labels
- Full-colour graphical screen
- Intuitive main menu with large icons ensuring easy navigation and configuration
- Quick Set buttons for fast data overview - particularly useful for troubleshooting applications
- Supplied with Metrel's PowerView3 Software for data download and analysis
- Create reports using the supplied Metrel PowerView3 Software
- Remote communication via Ethernet (GPS clock synchronisation - optional)
Applications
| Electrical Power System | Power Plants |
| Photovoltaic | |
| Distribution | |
| Buildings Facility Management | Public areas Safety / Quality |
| Voltage Quality / Power Loads | |
| Industrial Systems | LV Installations Safety / Quality |
| UPS Systems testing | |
| Switchboards / Controlgears | |
| Machines / Power Loads | |
| Electrical Equipment / Appliances | |
| Maintenance / Troubleshooting | |
| 3-phase system testing | |
| High-level industrial testing | |
| Mid-level industrial testing | |
| Special Installations/ Locations | Construction Sites |
| Railway Systems | |
| Ships / Boats / Marina Places | |
| Fire Brigade Vehicles | |
| Military / Police Vehicles | |
| Mobile LV Generator Units | |
| Medical Sites / Surgery Rooms | |
| Laboratory use | |
| Service / Repair / Rental Offices | |
| Electric motors testing |
What's Included?
Metrel MI2892 PowerMaster Power Quality Analyser Standard Set
- Metrel MI2892 PowerMaster Power Quality Analyser
- 5 x Test Probes (Brown, Black, Grey, Green and Blue)
- 5 x Crocodile Clips (Brown, Black, Grey, Green and Blue)
- 5 x Voltage Measurement Leads (Brown, Black, Grey, Green and Blue)
- Labels for Colour Coding
- Temperature Probe
- 8GB MicroSD Card
- MicroSD Card Reader
- PC SW PowerView3 Software
- RS232, USB and Ethernet Patch Cable
- Power Supply Adapter
- 6 x 1.2V NiMH Rechargeable Batteries
- Soft Carrying Bag
- Instruction Manual
- Calibration Certificate
Metrel MI2892 PowerMaster Power Quality Analyser Euro Set
- Metrel MI2892 PowerMaster Power Quality Analyser
- 4 x 1-Phase Flexible Current Clamps (3000/300/30A) Code: A1227
- 5 x Test Probes (Brown, Black, Grey, Green and Blue)
- 5 x Crocodile Clips (Brown, Black, Grey, Green and Blue)
- 5 x Voltage Measurement Leads (Brown, Black, Grey, Green and Blue)
- Labels for Colour Coding
- Temperature Probe
- 8GB MicroSD Card
- MicroSD Card Reader
- PC SW PowerView3 Software
- RS232, USB and Ethernet Patch Cable
- Power Supply Adapter
- 6 x 1.2V NiMH Rechargeable Batteries
- Soft Carrying Bag
- Instruction Manual
- Calibration Certificate
Metrel MI2892 PowerMaster Power Quality Analyser Advanced Set
- Metrel MI2892 PowerMaster Power Quality Analyser
- 4 x 1-Phase Flexible Current Clamps (3000/300/30A) Code: A1502
- 5 x Test Probes (Brown, Black, Grey, Green and Blue)
- 5 x Crocodile Clips (Brown, Black, Grey, Green and Blue)
- 5 x Voltage Measurement Leads (Brown, Black, Grey, Green and Blue)
- Labels for Colour Coding
- Temperature Probe
- 8GB MicroSD Card
- MicroSD Card Reader
- PC SW PowerView3 Software
- RS232, USB and Ethernet Patch Cable
- Power Supply Adapter
- 6 x 1.2V NiMH Rechargeable Batteries
- Soft Carrying Bag
- Instruction Manual
- Calibration Certificate
| Products | Sets | ||
| Standard | Euro | Advanced | |
| Metrel MI2892 PowerMaster Power Quality Analyser | X | X | X |
| 4 x 1-Phase Flexible Current Clamps (3000/300/30A) Code: A1227 | X | ||
| 4 x 1-Phase Flexible Current Clamps (3000/300/30A) Code: A1502 | X | ||
| 5 x Test Probes (Brown, Black, Grey, Green and Blue) | X | X | X |
| 5 x Crocodile Clips (Brown, Black, Grey, Green and Blue) | X | X | X |
| 5 x Voltage Measurement Leads (Brown, Black, Grey, Green and Blue) | X | X | X |
| Labels for Colour Coding | X | X | X |
| Temperature Probe | X | X | X |
| 8GB MicroSD Card | X | X | X |
| MicroSD Card Reader | X | X | X |
| PC SW PowerView3 Software | X | X | X |
| RS232, USB and Ethernet Patch Cable | X | X | X |
| Power Supply Adapter | X | X | X |
| 6 x 1.2V NiMH Rechargeable Batteries | X | X | X |
| Soft Carrying Bag | X | X | X |
| Instruction Manual | X | X | X |
| Calibration Certificate | X | X | X |
Metrel MI2892 PowerMaster Power Quality Analyser Technical Specifications
| Voltage Inputs | AC/DC | |
|---|---|---|
| Number of Inputs | 5 | |
| Nominal Voltage Range (L-N) |
Phase (L-N): 50 ... 1000 Vrms Line (L-L): 50 ... 1730 Vrms |
|
| Measuring Range | 10% - 150% of nominal voltage | |
| Accuracy | IEC 61000-4-30 Class A, ±0.1% of nominal voltage | |
| Sampling Rate |
7 kSamples per sec @ 50/60 Hz, sync with mains freq. 1.7 kSamples per sec @ VFD (5 Hz - 110 Hz) 12.2 kSamples per sec @ 400 Hz |
|
| Mains Frequency Range |
42,5 ... 69,0 Hz ±10 mHz 5 ... 110 Hz ± 10 mHz (VFD) 335,0 ... 465,0 Hz ± 100 mH |
|
| Current Inputs | AC/DC | |
| Number of Inputs | 4 | |
| Measuring Range (with A1227 flex clamps) | 3 - 6000A (rms) ±1.5% of m.v. | |
| Measuring Range (with A1281 iron clamps) | 50m - 1200A (rms) ±0.5% of m.v. | |
| Functions | Measuring Range | Accuracy |
| Power (P, Q, S, cos, PF) | Depends on voltage and selected clamps | IEC 61557-12 Class 1 |
| Energy | Depends on voltage and selected clamps | Active: IEC 62053-21 Class 1 Reactive: IEC 62053-23 Class 2 |
| Harmonics (DC ... 50th) | 0 ... 20% of nominal voltage | IEC 61000-4-7 Class 1 |
| Harmonics (DC ... 13th) @400 Hz | ||
| Harmonics (DC ... 20th) @VFD (5 - 16 Hz) | ||
| Harmonics (DC ... 13th) @VFD (16 - 33 Hz) | ||
| Harmonics (DC ... 5th) @VFD (33 - 110 Hz) | ||
| Interharmonics (1 ... 50th) | 0 ... 20% of nominal voltage | IEC 61000-4-7 Class 1 |
| Interharmonics (1 ... 20th) @VFD (5 - 16 Hz) | ||
| Interharmonics (1 ... 13th) @VFD (16 - 33 Hz) | ||
| Interharmonics (1 ... 5th) @VFD (33 - 110 Hz) | ||
| Flicker | 0.2 ... 10 | IEC 61000-4-15 Class F3 |
| Mains Signalling | 0 ... 15% of nominal voltage | IEC 61000-4-30 Class A |
| Unbalance | Voltage: 0 ... 5% Current: 0 ... 17% |
|
| Temperature | -10 ... 85°C | ±0.5°C |
| Dips, Swells | 10 ... 150% of nominal voltage |
±0.2 % of nominal voltage ±1 cycle |
| Interrupts | 0 ... 10% of nominal voltage | ±1 cycle |
| Recorders | ||
| Memory | 8GB microSD, up to 32GB supported | |
| General Recorder | ||
| Integration Period | 1s ... 2h | |
| Recorder Signals |
> 1000 (voltages, currents, harmonics, power…) Minimal, maximal and average value per interval - Voltage events - Custom alarms |
|
| Duration | > 1 year (depends on size of SD card) | |
| Waveform Recorder | ||
| Duration | Up to 20 seconds of voltage and current waveform | |
| Trigger | Manual, Voltage Events, Custom Alarms, voltage or current level (inrush) | |
| Transient Recorder | ||
| Sampling Rate | >50k samples/sec | |
| Duration | Up to 50 cycles of voltage and current waveform | |
| Trigger | Manual, voltage envelope or level | |
| General Specifications | ||
| Display | 4.3 inch colour TFT (480 x 272) | |
| Communication | USB, ethernet, RS-232 | |
| Time Synchronisation | GPS reciever (A 1355) | |
| Power Supply | 110 ... 240V AC or 6 x NiMH rechargable batteries, size AA) | |
| Overvoltage Category | CAT IV / 600V or CAT III / 1000V | |
| Weight | 0.96 kg | |
| Dimensions | 230 x 140 x 80mm | |
| SKU | MI2892-X |
|---|---|
| Manufacturer Part Code | MI2892-ST |
