Chauvin Arnoux PEL103 Power/Energy Logger Complete Kit

The Chauvin Arnoux PEL103 Power/Energy Logger Complete Kit includes a Chauvin Arnoux PEL 103 Power & Energy Logger, Chauvin Arnoux MA194/350 MiniFlex Clamp, self-powered adaptor, Free Dataview Software, as well as an array of testing accessories. Please see 'What's Included?' for a complete list of the items supplied in this kit. 

Chauvin Arnoux PEL 103 Power & Energy Logger Description

Please see the video below for a quick introduction to the Chauvin Arnoux PEL 103 Power & Energy Logger. 

The Chauvin Arnoux PEL 103 Power & Energy Logger can be used to monitor the energy and power consumption of electrical systems without disturbing the mains power supply. It is suitable for use with all electrical installation types, including single-phase, split-phase and three-phase (with or without neutral). The video below provides brief instructions on how to connect the Chauvin Arnoux PEL 103 to a three-phase installation. 

Three current sensors and three voltage inputs facilitate the Chauvin Arnoux PEL 103 Power & Energy Logger's measurement capabilities. It automatically recognises the connected sensor type and can be used to measure the following parameters:

• Voltage: 10 to 1000V AC/DC
• Current AC: up to 10kA 
• Current DC: up to 5kA (Additional current clamp required to measure DC)
• Voltage ratio / current ratio: up to 650 000V / 25 000A
• Power: from 10 W/var/VA to 10 GW/Gvar/GVA
• Energy: up to 4EWh / 4 EVAh / 4 Evarh and total energy (4 quadrants)
• Phase: cos φ, tan Φ, PF
• Harmonics: up to the 50^th order
• DC Network frequency: 50Hz, 60Hz and 400Hz

The Chauvin Arnoux PEL 103 supports analogue measurements, as well as RMS and DC measurements with 128 samples/cycle simultaneously on each phase. It can also be used to determine the crest factor, calculate the total harmonic distortion for currents and voltages, and break down detected energy losses. The following video details how to start and stop a logging session. 

Measurements and calculations are indicated on the Chauvin Arnoux PEL 103 Power & Energy Logger’s LCD display and may be recorded in real-time onto an SD card. Moreover, data can be transferred to a PC (also in real-time) via an Ethernet, Bluetooth or USB interface and the supplied PEL Transfer Software. The PEL Transfer Software can be used to view and analyse results, as well as configure the PEL 103 and verify its connections prior to operation. Please see the videos below for instructions on how to install the PEL Transfer Software, download logged results, and configure the PEL 103 using the PEL Transfer Software. 

How to Install the PEL Transfer Software

How to Download Logged Results from the PEL 103 to the PEL Transfer Software 

How to Set Up the PEL 103 Using the PEL Transfer Software

Additionally, Chauvin Arnoux’s Free DataView® Software can be used to create customised reports, as well as standard energy consumption reports. For further details regarding this FREE software, please see the description below.

Finally, the Chauvin Arnoux PEL 103 Power & Energy Logger's magnetised, compact design makes it ideal for conducting measurements in small and/or cramped spaces without causing disruption to the electrical system. It is ideal for the following applications:

• Energy efficiency projects
• Monitoring electrical distribution systems
• Monitoring and mapping consumption on worksites: ideal for factory, workshop, building, and agency sites. This instrument can simultaneously monitor real-time consumption and historical consumption while performing a comparative analysis of consumption.
• Predictive maintenance: the logger constantly monitors active, apparent, and reactive power values allowing it to detect when the specified power threshold has been breached. This allows the user to address the issue causing the overconsumption quickly.
• Networking and centralised consumption management: when used in conjunction with other Chauvin Arnoux PEL 103 Power & Energy Loggers, users can monitor the energy consumption of different sectors.
• Monitor adjustments: measurements taken using the Chauvin Arnoux PEL 103 Power & Energy Logger are date and time stamped, therefore users can compare measurements before system alterations and measurements after any alterations, allowing them to determine whether any changes made to the installation have been effective.
• Measure motors
• Characterisation of electric motors: determine the rotation speed, efficiency, and motor torque using Chauvin Arnoux's PEL 100 wANDROID app. Please see the video below for instructions on how to download and use the PEL Android App.

The Chauvin Arnoux PEL 103 Power & Energy Logger is a versatile, comprehensive, and ergonomic instrument. It is ideal for measuring and monitoring electrical installations in a variety of environments.

Chauvin Arnoux PEL 103 Power & Energy Logger Key Features

• Monitor energy and power consumptions of electrical systems
• Suitable for measuring all electrical installation types including single-phase, split-phase, and three-phase (with or without neutral)
• Mains power supply is not disrupted
• Three current sensors and voltage inputs
• Voltage: 10 to 1000V AC/DC
• Current AC: up to 10kA 
• Current DC: up to 5kA (Additional current clamp required to measure DC)
• Voltage ratio / current ratio: up to 650 000V / 25 000A
• Power: from 10 W/var/VA to 10 GW/Gvar/GVA
• Energy: up to 4EWh / 4 EVAh / 4 Evarh and total energy (4 quadrants)
• Phase: cos φ, tan Φ, PF
• Harmonics: up to the 50^th order
• DC Network frequency: 50Hz, 60Hz and 400Hz
• RMS and DC measurements with 128 samples/cycle simultaneously on each phase
• Analogue measurements 
• Crest factor
• Total harmonic distortion calculation for currents and voltages
• Breakdown of energy losses 
• Automatically identifies the connected sensor type
• LCD display
• Saves measurements and calculations in real-time to an SD card
• Ethernet, Bluetooth and USB communication interfaces
• Download measurements using the supplied PEL Transfer Software
• Analyse data and create reports using the PEL Transfer Software 
• Use the PEL Transfer Software to configure the logger and check its connections
• Create reports using Chauvin Arnoux’s Free DataView® Software (see below)
• Compact
• Magnetic
• Ideal for energy efficiency projects
• Suitable for monitoring electrical distribution systems
• Measure motors
• Characterisation of electric motors (using Chauvin Arnoux's PEL 100 wANDROID app)
• Monitor and map consumption on worksites
• Perform predictive maintenance
• Ideal for networking and centralised consumption management
• Evaluate the efficacy of adjustments made to electrical installations
• Versatile, comprehensive, and ergonomic power & energy logger 
• Supplied with a self-powering mains adapter - allowing the logger to be powered without the need for a mains supply, thereby increasing its practicality and scope-for-use
• Self-powering via the phase
• Ideal for measuring and monitoring electrical installations in a variety of environments

Free Chauvin Arnoux DataView® Software Description

The Chauvin Arnoux DataView® Software can be used to configure the Chauvin Arnoux PEL 103 Power & Energy Logger, access and analyse saved data, create reports, and manage databases.

The Chauvin Arnoux's DataView® Software is compatible with an array of Chauvin Arnoux instruments. It automatically recognises the connected Chauvin Arnoux product, for example, the PEL 103, and opens the corresponding tree-structured menu, thereby enabling fast, simple, and clear navigation. Users can easily access and view the data recorded on the Chauvin Arnoux PEL 103 Power & Energy Logger, create reports, and back up data on their PC. 

The Chauvin Arnoux DataView® Software includes a number of standard report templates for easy and quick report generation in accordance with EN50160 and IEC 60364 standards.* However, this software’s capabilities makes it just as easy to create customised reports. Reports can be exported in .pdf formats. Alternatively, data may be exported into Excel spreadsheets.

Chauvin Arnoux's DataView® Software is ideal for increasing the efficiency of power and energy inspection and measurement tasks, making it the ideal accompaniment to the Chauvin Arnoux PEL 103 Power & Energy Logger.

Free Chauvin Arnoux DataView® Software Key Features

• Configure the Chauvin Arnoux PEL 103 Power & Energy Logger
• Access and analyse data
• Create reports
• Manage databases
• Compatible with an extensive collection of Chauvin Arnoux products
• Connect instruments via a PC or Bluetooth
• Automatically identifies which instrument has been connected and opens the corresponding tree-structured menu
• Provides easy access to the data stored on the connected instrument
• Data can be backed-up to the user’s PC or tablet
• Includes template reports compliant with EN50160 and IEC 60364*
• Ability to create customised reports
• Reports can be exported in .pdf formats
• Data can be exported into Excel spreadsheets
• Ideal for increasing the efficiency of inspection and measurement tasks 

* For further details, please see the attached datasheet.

Chauvin Arnoux MA194 MiniFlex Clamp Description

The Chauvin Arnoux MA194/350 MiniFlex Clamp can be used with the Chauvin Arnoux PEL 103 Power & Energy Logger to measure currents between 100mA to 10 000A. It has a clamp diameter of 100mm and a 3m cord. 

The Chauvin Arnoux PEL 103 Power & Energy Logger will automatically recognise the Chauvin Arnoux MA194/350 MiniFlex Clamp when it is connected

What's Included? 

• 1x Chauvin Arnoux PEL 103 Power & Energy Logger
• 3x Chauvin Arnoux MA194/350 MiniFlex Clamp
• 1x Power Adaptor
• 2x Reeling Boxes
• 4x Black Magnetic Probes 
• 1x Hard Backed Case
• 1x Free Chauvin Arnoux DataView Software