Stands & Workholdings
Offer
£11.60
£13.92 inc. vat
- 31mm, 44.5mm, 56.5mm, 69.5mm & 88.5mm
- Jaws are case hardened
- Knurled screw heads
- Spring clip
Offer
£11.95
£14.34 inc. vat
- Fully adjustable
- 4 adjustment points
Offer
£21.95
£26.34 inc. vat
- 180-degree tilt head
- Jaw width: 70mm (2.75”)
- Throat depth: 35mm (1.375”)
- Materials: Aluminium, rubber, metal
Offer
£28.60
£34.32 inc. vat
- Maximum jaw Opening: 60mm
- Jaw width: 65mm
- Jaw height: 30mm
- Maximum table clamping: 40mm
- Rotating vice head: 360 degrees
Offer
£48.00
£57.60 inc. vat
- Accuracy of angles ± 30 seconds
- Flatness within 0.0004”
- Four 1-1/32” holes for clamping
Offer
£59.00
£70.80 inc. vat
- Clamps onto iron and steel surfaces with a strong force
- V-grooved base for mounting onto flat and cylindrical surfaces
- A quarter-turn of the lever switches the magnetic clamping on and off
Offer
£69.40
£83.28 inc. vat
- Slot size: 15mm
- Jaw width: 125mm
- Jaw height: 29mm
- Jaw opening: 125mm
Offer
£162.00
£194.40 inc. vat
- All vices are HRC 58-62
- Jaw height: 32mm
- Jaw opening: 65mm or 85mm
Offer
Call For Pricing
- Free from wringing
- Twice as hard as cast iron
- Non-magnetic; low thermal expansion
Offer
£170.00
£204.00 inc. vat
- Jaw width: 100mm
- Jaw height: 35mm
- Jaw opening: 80mm
Offer
£172.00
£206.40 inc. vat
- Vice is HRC 58-62
- Accuracy: 0.005mm
- Jaw width: 63mm
- Jaw height: 32mm
- Jaw opening: 85mm
Offer
£188.00
£225.60 inc. vat
- 100mm or 160mm jaw widths
- Parallelism of jaws 0.03mm/100mm
Offer
£197.50
£237.00 inc. vat
- Vertical and horizontal
- Includes 6 touchpoints
Offer
£360.00
£432.00 inc. vat
- Jaw width: 100mm
- Jaw height: 35mm
- Jaw opening: 10-80mm
Offer
£380.00
£456.00 inc. vat
- 80 mm or 125 mm jaw opening
- Parallelism of jaws 0.03mm/100mm
Offer
£429.00
£514.80 inc. vat
- Parallel spring suspension and one-touch control
- Fine vertical adjustment
- For use with dial or digimatic indicators
Offer
£476.50
£571.80 inc. vat
- Table surface is lapped
- Plain, Threaded, Handwheel & Granite options
- Adapter Hole
Offer
Call For Pricing
- Granite base
- 0-250mm, 0-260mm & 0-275mm column travels available
Offer
£529.00
£634.80 inc. vat
- Support base
- Suitable for the Series 515 High Accuracy Check Master
Offer
£549.00
£658.80 inc. vat
- Accurate measurement
- Very stable, cast iron base
- Prevents very flat workpieces from wringing to it
Offer
£649.00
£778.80 inc. vat
- Designed for comparison measurements
- Suitable for a Dial or Digimatic indicator
Offer
£1,063.50
£1,276.20 inc. vat
- Level and steady
- Streamlines dimensional inspection
Page 1 of 1
About Stands & Workholdings
Workholding refers to any device used to securely position and firmly hold a workpiece in its proper orientation with enough supportive force and without damage. Support your tools with these stands and workholdings as the significance of appropriate workholding should not be underestimated.
