The quick and easy way to test electrical parameters, the TPI 100 automatically measures DC voltage, AC voltage and resistance with just one button press.
Featuring a large-size, 4000 count digital display, the TPI 100 can measure AC/DC voltage up to 600V and resistance levels to 40MΩ with a high degree of accuracy.
To conserve battery life this DMM will automatically power itself down after 10 minutes.
Automatically adds to your basket when the total exceeds £500+ (ex VAT). Limited Stock. More details here.
| DC Volts | Maximum Input: 600V (Minimum Input = 1.5V)
Maximum Resolution: 0.001V Accuracy: +/-0.5% |
| AC Volts | Maximum Input: 600V (Minimum Input = 1.7V)
Maximum Resolution: 0.1V Accuracy: +/-0.8% |
| DC Amps | N/A |
| AC Amps | N/A |
| Resistance (Ohms) | Maximum Input: 40MΩ
Maximum Resolution: 0.1Ω Accuracy: +/-0.8% |
| Frequency | N/A |
| Capacitance | N/A |
| Inductance | N/A |
| Temperature
(K-Type Thermocouple) |
N/A |
| Continuity | Audible at less than 100Ω |
| Diode | N/A |
| Duty Cycle | N/A |
| True RMS Responding | No |
| Conductance | No |
| Pulse Width | No |
| Data Hold | No |
| Min/Max Record | No |
| Time Stamp Logging | No |
| Relative Mode | No |
| Compare Mode | No |
| RS-232 Output | No |
| Process Loop Output | No |
| Sleep Mode / Auto Off | Yes |
| Protective Boot | Yes (standard) |
| Display Type | 4000 count LCD |
| Range Selection | Auto including function selection |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | 14°F to 122°F (-10°C to 50°C) |
| Humidity | 80% non-condensing |
| Size | 6” x 3.1” x 1.2” (187mm x 86mm x 33mm) with boot |
| Weight | 12oz (340g) with boot |
| Battery Type | 1.5V “AA” Alkaline (2) |
| Battery Life | 500hrs Typical |
| OverInput Category | CAT III 600V |
| Agency Approval | IEC 61010-1 |
| Warranty | 3 Years |