This simple-to-use, low-cost smart vibration and bearing condition analyser with 1.5m BNC Cable Accelerometer and Magnet kit, is ideal for recording, analysing and finding problems with the vibration of machinery and equipment.
Supplied as standard with a BNC cable accelerometer with built-in magnet, the TPI 9071 can be used to easily find a clear picture of problems with unbalance, misalignment and looseness. For more complex issues, an 800-line spectrum with zoom and cursor helps to identify complex issues.
The TPI 9071 is suitable for use in a wide variety of areas, including commercial/industrial HVAC, food processing, manufacturing, mining, packaging, petrochemical, pulp/paper production, power plants and utilities.
During testing, the TPI 9071 will give you an overall snapshot into the machine under test's machine/bearing conditions. Vibration values are displayed on the screen with colour-coded alarm levels for ISO values and bearing damage (BDU), with it possible to switch to unbalance/misalignment and looseness mode for a clear picture of problems.
The TPI 9071 is also a data logging vibration meter and can store up to 200 readings in internal memory for easy recall.
TPI 9071 Vibration Meter Key Features
- Find problems with your machinery and equipment by analysing vibration
- Full colour LED display
- Standard cable mounted accelerometer with magnet
- ISO built-in alarms
- Easily identify bearing problems with BDU readings
- Easy identify machine faults with unbalance, misalingment and looseness built-in band filter
- 800 line FFT spectrum analysis for further analysis into faults
- Ruggedised, IP67 rated casing
- Collect and store up to 200 readings in internal memory
- TPI 9071 Vibration Meter
- A9012 IEPE Accelerometer with Cable (1.5m)
- A9073 Magnet
- A9074 Soft Pouch
- A9086 Protective Boot with Magnets
TPI 9071 Technical Specifications
|Size||200 x 60 x 26mm|
|Environmental||Water: IP67 waterproof
Operating: -20 to 70°C
Storage: -20 to 70°C
|Power Supply||2 x AA batteries|
|Battery Life||Approx 50 hours of normal use|
|Frequency Ranges||2/10Hz - 1kHz ISO
2Hz - 10kHz Total g
1kHz - 10kHz Bearing Analysis
|Frequency Resolution||100/800 lines|
|Displayed Amplitude Units||Acceleration in g
Velocity in inches per second or mm per second
Bearing damage in BDU
|Displayed Frequency Units||Hz, CPM or RMP|
|Input Range||±50g (with supplied accelerometer)|
|Dynamic Range||72dB (0.05g resolution)|
|Measurement Storage||200 readings|
|Accelerometer Connection||BNC connector cable with removeable magnet (1mV/g - 10000mV/g)|
|Manufacturer Part Code||9071|