Important Notice
This item is made-to-order exclusively for you once your order is placed. As a result, it is not eligible for cancellation or return under our standard policy. Your statutory rights remain unaffected.
Free Tyre Inflator. Spend £1000+ (ex VAT) View
C. Scope YIRP-33-E Signal Injector – European Version
- Safely and efficiently apply an 8kHz or 33kHz signal directly to an electrical system
- Maximises cable energisation and detection
- Optimised for Europe: supplied with a two-pin Shuko plug
SKU
YIRIP-33-E
MPN
YIRP-33-8-E
The C. Scope YIRP-33-E Signal Injector can be used to maximises cable energisation and, therefore, detection. It can be used with a C. Scope Signal Generator/ Transmitter to apply a 33kHz or 8kHz signal directly to an electrical system, enabling all supply cables inside and outside the building to be detected by a C. Scope Cable Avoidance Tool or Cable Locator.
The C. Scope YIRP-33-E Signal Injector safely applies the signal to the electrical system via a three-pin power socket. For added protection, the C. Scope YIRP-33-E Signal Injector also isolates the signal generator from the electrical supply.
As the C. Scope YIRP-33-E Signal Injector is designed for use in Europe, it is supplied with a two-pin Shuko plug. A UK version is available here.
Finally, the C. Scope YIRP-33-E Signal Injector features a weatherproof design. It has an ingress protection rating of 65.
The C. Scope YIRP-33-E Signal Injector provides an efficient, effective and easy method of maximising cable energisation and detection.
C. Scope YIRP-33-E Signal Injector Key Features
- Can be used to maximise cable energisation and detection
- Can apply a 33kHz or 8kHz signal directly to an electrical system via a three-pin power socket
- Enables all supply cables inside and outside the building to be detected using a C. Scope Cable Avoidance Tool or Cable Locator
- Isolates the signal generator from the electrical supply for safety
- Supplied with a European two-pin Shuko plug
- Weatherproof design: IP65
- An efficient, effective and easy method of maximising cable energisation and detection
What’s Included?
- C. Scope YIRP-33-E Signal Injector – European Version
Technical Information
Specification
C. Scope YIRP-33-E Signal Injector Technical Specifications
| Input Lead Length | 1m (3’3.3”) |
| Output Lead Length | 1.5m (4’11”) |
| Construction | Encapsulated, robust housing |
| Moisture/dust resistant to IP54 | |
| Electrical Output (Mains side) | |
| Electrical Isolation | Class II (Double Insulated) |
| Mains Plug Connector | 2 pin European Shuko style |
| Maximum Voltage | 250 V rms |
| Maximum Load | <10mA (predominantly capacitive) |
| Frequency range | 45-65Hz |
| Electrical Input (Signal Generator/ Transmitter side) | |
| Connector | 3 pin XLR male (industry standard) |
| Maximum Voltage | 42 V rms |
| Maximum Power | <250mW when driven from C.SCOPE Signal Generator/ Transmitter |
| Input Impedance | 2000 Ohms |
| Frequency | 32,768Hz |
| Safety | Built to conform to BSEN61010-1:1993 and BSEN 61010-2-032:1995 |
Document Downloads
C. Scope YIRP-33 Signal Injector – Datasheet
C.Scope Accessory Range for Pipe & Cable Location Equipment - User Manual
Additional Information
SKU
YIRIP-33-E
Manufacturer Part Code
YIRP-33-8-E
Country of Origin
United Kingdom
C. Scope YIRP-33-E Signal Injector – European Version
£109.00
£130.80 inc vat
£109.00
£130.80 inc vat