The Comark C9505 has been classified with Ex II 1 G EEx ia IIC T4 Baseefa 03 ATEX 0079 certification for use in environments where this a risk of combustion. Please check that this meter is suitable for your environment before purchasing.
With a wide measurement range and the ability to be used safely in dangerous environments, Comark’s C9505 is ideal for use in measuring pressure from 0 to ±2100mBar.
Featuring multiple selectable pressure units of PSI, mbar, inH20, inHg, torr, KPa, cmH20 and Kgcm-2, the C9505 is flexible for use in a wide variety of different areas and can perform both positive and negative (vacuum) pressure measurements.
Comark C9505 ATEX Intrinsically Safe Pressure Meter Key Features
- Intrinsically safe – certified with Ex II 1 G EEx ia IIC T4 Baseefa 03 ATEX 0079 designation
- Impregnated protection: limits electrical discharge and surface temperature to prevent ignition of volatile gases, dust or vapours
- Suitable for use in areas with explosive or flammable substances
- Pressure range: 0 to ±2100mbar
- Select your pressure measurement unit: choose between PSI, mBar, inH20, inHg, mmHg, torr, KPa, cmH20 and Kgcm-2
- Twin inputs for gauge or differential pressure measurements
- Positive/ negative ports for positive or negative (vacuum) pressure measurements
- Adjustable zero value
- Max/Min pressure functions
- Data hold function temporarily stores last value taken
- Average reading function
- Filter function removes transient readings and takes the average measurement using the results captured during the preceding four seconds
- Record function
- Overrange indication – maximum over/under pressure 90PSI/6200mBar
- Indication for readings in excess of 9999
- Low battery indication
- Supplied with a 9V PP3 6F22 battery
- Battery life: up to 125 hours of continuous use
- Supplied with 4x 1/8" BSP nylon washers, 1.4m polyurethane tube and 2x male coupling with washers
- Ultra-tough, water- and dust-proof case
- IP67
- Selectable auto switch off
- Functions as a calibrator when used with Comark’s TK2 pressure test kit
What’s Included?
- Comark C9505 ATEX Intrinsically Safe Pressure Meter
- 9V PP3 6F22 Battery
- 4x 1/8" BSP Nylon Washers
- 1.4m Polyurethane Tube
- 2x Male Coupling with Washers
Comark C9505 Technical Specifications
Pressure Measurement Range | 0 to ±2100 mBar |
Resolution | 0.1mBar |
Accuracy | ±0.2% of full scale (FS) at +23°C |
Repeatability | ±0.1% of full scale (FS) at +23°C |
Mean Temperature Coefficient of Reading | <0.1% per °C |
Operating Temperature Range | 0 to 50°C |
Humidity Range | 10 to 90% RH non-condensing |
EMC | Tested to EN61326-1 Criteria B performance |
Environmental Protection | IP67, BS:EN60529, IEC529 |
Battery | 9V PP3 *6F22 — 6F22REL or GP1604G |
125 hours | |
*IS models must only use Zinc Chloride Battery | |
Low Battery Warning | Displays BAT just before end point of battery |
Over Pressure Indication | – – – – |
Over 9999 Reading Indication | Lowest 4 digits blink |
Connections | 1/8" BSP female |
Dimensions | 175 x 82 x 32mm |
Weight | 330gm including battery |
Accessories related to this product:
0 Reviews
Overall Rating
Additional Information
SKU | C9505/IS |
---|---|
Manufacturer Part Code | 3059264 |
Country of Origin | United Kingdom |