The CableData Collector identifies and allows you to report on PD activity in LIVE MV/HV cable networks. This early identification helps to reduce the need for disruptive maintenance outages, by highlighting high-risk areas in ample time for repairs and replacements to be made.


Call 01642 931 329 or complete the form:
| CableData Collector Technical Specification | |
|---|---|
| PHYSICAL | |
| Size | 176 mm x 120 mm x 28 mm |
| Weight | 0.57 kg |
| Enclosure | Anodised Aluminium |
| Indicators | Phase Reference Events Capture Cable Construction Dependent |
| Connectors | 3x BNC (Cable PD) 1x BNC (Phase Reference) 1x Mini-USB (Power & Communication) 1x SD Card (not used) 1x Ethernet (not used) |
| CABLE PD MEASUREMENT | |
| Sensor | 3x High Frequency Current Transformer (HFCT) |
| Maximum Cable Length | Cable construction dependent |
| Measurement Type | Single-phase or three-phase |
| Digital Filter Ranges | Unfiltered, 500kHz (high pass) 1800kHz (high pass) |
| Bandwidth (Unfiltered) | 4KHz - 49 MHz |
| Minimum Event Detection | 5pC (with HFCT1-F50) |
| Gain Ranges | 4 (-12dB, -6dB, 0dB, +6dB) |
| Measurement Accuracy | ±1 dB |
| Phase Reference | Auxiliary phase reference transformer (CDC2-PRT) or HFCT (10A minimum primary current) |
| ENVIRONMENTAL | |
| Operating Temperature | -20 - +50 degrees C |
| Humidity | 0 - 90% non-condensing |
| IP Rating | IP3X (In accordance with EN 60529 1992+A2-2013) |
| POWER SUPPLY | |
| Power supply | Powered through a USB connection from a PC |
| PC / SOFTWARE REQUIREMENTS | |
| Operating System | Windows 10 |
| Peripheral Connectors | 1x USB Port |
| Acquisition Software | CableDataCollector 4.1.0 (or greater) |
| Data Analysis Software | Cable Data Acquisition Studio (CDAS) 1.0.2.0 (or greater) |
| COMPLIANCE / SAFETY | |
| Electromagnetic Compatibility (EMC) | EN 61326-1:2013 Electrical equipment for measurement control, and lab use - EMC requirements |
| EN 61000-6-2:2019 Electromagnetic compatibility (EMC) Generic standards Immunity to industrial environments |
|
| EN 61000-6-4:2019 Electromagnetic compatibility (EMC) Generic standards Emission standard for industrial environments |
|